public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Zenghui Yu <yuzenghui@huawei.com>
Cc: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org,
	tglx@linutronix.de, jason@lakedaemon.net,
	wanghaibin.wang@huawei.com
Subject: Re: [PATCH] irqchip/gic-v3-its: Don't confuse get_vlpi_map() by writing DB config
Date: Wed, 22 Jan 2020 10:44:06 +0000	[thread overview]
Message-ID: <4aaaad3ae7367c5c932c430e18550d9e@kernel.org> (raw)
In-Reply-To: <20200122085609.658-1-yuzenghui@huawei.com>

Hi Zenghui,

Thanks for this.

On 2020-01-22 08:56, Zenghui Yu wrote:
> When we're writing config for the doorbell interrupt, get_vlpi_map() 
> will
> get confused by doorbell's d->parent_data hack and find the wrong 
> its_dev
> as chip data and the wrong event.
> 
> Fix this issue by making sure no doorbells will be involved before 
> invoking
> get_vlpi_map(), which restore some of the logic in lpi_write_config().
> 
> Fixes: c1d4d5cd203c ("irqchip/gic-v3-its: Add its_vlpi_map helpers")
> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
> ---
> 
> This is based on mainline and can't be directly applied to the current
> irqchip-next.
> 
>  drivers/irqchip/irq-gic-v3-its.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-gic-v3-its.c 
> b/drivers/irqchip/irq-gic-v3-its.c
> index e05673bcd52b..cc8a4fcbd6d6 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -1181,12 +1181,13 @@ static struct its_vlpi_map
> *get_vlpi_map(struct irq_data *d)
> 
>  static void lpi_write_config(struct irq_data *d, u8 clr, u8 set)
>  {
> -	struct its_vlpi_map *map = get_vlpi_map(d);
>  	irq_hw_number_t hwirq;
>  	void *va;
>  	u8 *cfg;
> 
> -	if (map) {
> +	if (irqd_is_forwarded_to_vcpu(d)) {
> +		struct its_vlpi_map *map = get_vlpi_map(d);
> +
>  		va = page_address(map->vm->vprop_page);
>  		hwirq = map->vintid;

Shouldn't we fix get_vlpi_map() instead? Something like (untested):

diff --git a/drivers/irqchip/irq-gic-v3-its.c 
b/drivers/irqchip/irq-gic-v3-its.c
index e05673bcd52b..b704214390c0 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -1170,13 +1170,14 @@ static void its_send_vclear(struct its_device 
*dev, u32 event_id)
   */
  static struct its_vlpi_map *get_vlpi_map(struct irq_data *d)
  {
-	struct its_device *its_dev = irq_data_get_irq_chip_data(d);
-	u32 event = its_get_event_id(d);
+	if (irqd_is_forwarded_to_vcpu(d)) {
+		struct its_device *its_dev = irq_data_get_irq_chip_data(d);
+		u32 event = its_get_event_id(d);

-	if (!irqd_is_forwarded_to_vcpu(d))
-		return NULL;
+		return dev_event_to_vlpi_map(its_dev, event);
+	}

-	return dev_event_to_vlpi_map(its_dev, event);
+	return NULL;
  }

  static void lpi_write_config(struct irq_data *d, u8 clr, u8 set)


Or am I missing the actual problem?

Overall, I'm starting to hate that ->parent hack as it's been the source
of a number of bugs.

The main issue is that the VPE hierarchy is missing one level (it has
no ITS domain, and goes directly from the VPE domain to the low-level
GIC domain). It means we end-up special-casing things, and that's never
good...

         M.
-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2020-01-22 10:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-22  8:56 [PATCH] irqchip/gic-v3-its: Don't confuse get_vlpi_map() by writing DB config Zenghui Yu
2020-01-22 10:44 ` Marc Zyngier [this message]
2020-01-22 11:29   ` Zenghui Yu
2020-01-22 15:22     ` Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbells tip-bot2 for Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4aaaad3ae7367c5c932c430e18550d9e@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=wanghaibin.wang@huawei.com \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox