Re: [PATCH v2 1/6] media: dt-bindings: Add bindings for JH7110 Camera Subsystem

[Jack Zhu <jack.zhu@starfivetech.com>]

On 2023/3/12 19:12, Laurent Pinchart wrote:
> Hi Jack,
> 
> Thank you for the patch.

Thank you for your comments.

> 
> On Fri, Mar 10, 2023 at 08:05:48PM +0800, Jack Zhu wrote:
>> Add the bindings documentation for Starfive JH7110 Camera Subsystem
>> which is used for handing image sensor data.
>> 
>> Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com>
>> ---
>>  .../bindings/media/starfive,jh7110-camss.yaml | 144 ++++++++++++++++++
>>  1 file changed, 144 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>> new file mode 100644
>> index 000000000000..3f348dd53441
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>> @@ -0,0 +1,144 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Starfive SoC CAMSS ISP
>> +
>> +maintainers:
>> +  - Jack Zhu <jack.zhu@starfivetech.com>
>> +  - Changhuang Liang <changhuang.liang@starfivetech.com>
>> +
>> +description:
>> +  The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC.It
> 
> s/.It/. It/

OK, will fix

> 
>> +  consists of a VIN controller(Video In Controller, a top-level control until)
> 
> s/(/ (/

OK, will fix

> 
>> +  and an ISP.
>> +
>> +properties:
>> +  compatible:
>> +    const: starfive,jh7110-camss
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  reg-names:
>> +    items:
>> +      - const: syscon
>> +      - const: isp
>> +
>> +  clocks:
>> +    maxItems: 7
>> +
>> +  clock-names:
>> +    items:
>> +      - const: apb_func
>> +      - const: wrapper_clk_c
>> +      - const: dvp_inv
>> +      - const: axiwr
>> +      - const: mipi_rx0_pxl
>> +      - const: ispcore_2x
>> +      - const: isp_axi
>> +
>> +  resets:
>> +    maxItems: 6
>> +
>> +  reset-names:
>> +    items:
>> +      - const: wrapper_p
>> +      - const: wrapper_c
>> +      - const: axird
>> +      - const: axiwr
>> +      - const: isp_top_n
>> +      - const: isp_top_axi
>> +
>> +  power-domains:
>> +    items:
>> +      - description: JH7110 ISP Power Domain Switch Controller.
>> +
>> +  interrupts:
>> +    maxItems: 4
>> +
>> +  ports:
>> +    $ref: /schemas/graph.yaml#/properties/ports
>> +
>> +    properties:
>> +      port@1:
> 
> Why port@1 if there is no port@0 ?

Will add port@0 node in the next version.
port@0 is reserved for DVP sensor which is not currently supported.

> 
>> +        $ref: /schemas/graph.yaml#/$defs/port-base
> 
> I think you can use
> 
>         $ref: /schemas/graph.yaml#/properties/port
> 
> here as you don't define any additional property for the port node.

OK, will alter it

> 
>> +        unevaluatedProperties: false
>> +        description:
>> +          Input port for receiving CSI data.
>> +
>> +        properties:
>> +          endpoint:
>> +            $ref: video-interfaces.yaml#
>> +            unevaluatedProperties: false
>> +
>> +    required:
>> +      - port@1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - reg-names
>> +  - clocks
>> +  - clock-names
>> +  - resets
>> +  - reset-names
>> +  - power-domains
>> +  - interrupts
> 
> The 'ports' node should be mandatory too.

OK, will fix. Thanks.

> 
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    stfcamss: isp@19840000 {
> 
> You can drop the label as it's not used.

OK, will drop.

> 
>> +        compatible = "starfive,jh7110-camss";
>> +        reg = <0x19840000 0x10000>,
>> +              <0x19870000 0x30000>;
>> +        reg-names = "syscon", "isp";
>> +        clocks = <&ispcrg 0>,
>> +                 <&ispcrg 13>,
>> +                 <&ispcrg 2>,
>> +                 <&ispcrg 12>,
>> +                 <&ispcrg 1>,
>> +                 <&syscrg 51>,
>> +                 <&syscrg 52>;
>> +        clock-names = "apb_func",
>> +                      "wrapper_clk_c",
>> +                      "dvp_inv",
>> +                      "axiwr",
>> +                      "mipi_rx0_pxl",
>> +                      "ispcore_2x",
>> +                      "isp_axi";
>> +        resets = <&ispcrg 0>,
>> +                 <&ispcrg 1>,
>> +                 <&ispcrg 10>,
>> +                 <&ispcrg 11>,
>> +                 <&syscrg 41>,
>> +                 <&syscrg 42>;
>> +        reset-names = "wrapper_p",
>> +                      "wrapper_c",
>> +                      "axird",
>> +                      "axiwr",
>> +                      "isp_top_n",
>> +                      "isp_top_axi";
>> +        power-domains = <&pwrc 5>;
>> +        interrupts = <92>, <87>, <88>, <90>;
>> +
>> +        ports {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +
>> +            port@1 {
>> +                reg = <1>;
>> +                #address-cells = <1>;
>> +                #size-cells = <0>;
>> +
>> +                vin_from_csi2rx: endpoint {
>> +                    remote-endpoint = <&csi2rx_to_vin>;
>> +                };
>> +            };
>> +        };
>> +    };
>