From: <Claudiu.Beznea@microchip.com>
To: <michael@walle.cc>, <Kavyasree.Kotagiri@microchip.com>,
<Nicolas.Ferre@microchip.com>
Cc: <arnd@arndb.de>, <olof@lixom.net>, <soc@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski@canonical.com>,
<alexandre.belloni@bootlin.com>
Subject: Re: [PATCH v2 6/7] ARM: dts: lan966x: add flexcom I2C nodes
Date: Wed, 30 Mar 2022 13:26:17 +0000 [thread overview]
Message-ID: <4dcad1c3-c471-ce70-eecb-17f803f737b4@microchip.com> (raw)
In-Reply-To: <20220304153548.3364480-7-michael@walle.cc>
On 04.03.2022 17:35, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Add all I2C nodes of the flexcom IP blocks. The driver supports
> FIFO, DMA or both combined. But the latter isn't working correctly.
> Thus, skip the fifo-size property for now. DMA is doing single byte
> reads in this case.
>
> Keep the nodes disabled by default.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> arch/arm/boot/dts/lan966x.dtsi | 65 ++++++++++++++++++++++++++++++++++
> 1 file changed, 65 insertions(+)
>
> diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
> index a61d394ad04d..95d58bdca3f0 100644
> --- a/arch/arm/boot/dts/lan966x.dtsi
> +++ b/arch/arm/boot/dts/lan966x.dtsi
> @@ -120,6 +120,19 @@ spi0: spi@400 {
> #size-cells = <0>;
> status = "disabled";
> };
> +
> + i2c0: i2c@600 {
> + compatible = "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
> + <&dma0 AT91_XDMAC_DT_PERID(2)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> flx1: flexcom@e0044000 {
> @@ -158,6 +171,19 @@ spi1: spi@400 {
> #size-cells = <0>;
> status = "disabled";
> };
> +
> + i2c1: i2c@600 {
> + compatible = "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
> + <&dma0 AT91_XDMAC_DT_PERID(4)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> trng: rng@e0048000 {
> @@ -213,6 +239,19 @@ spi2: spi@400 {
> #size-cells = <0>;
> status = "disabled";
> };
> +
> + i2c2: i2c@600 {
> + compatible = "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
> + <&dma0 AT91_XDMAC_DT_PERID(6)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> flx3: flexcom@e0064000 {
> @@ -251,6 +290,19 @@ spi3: spi@400 {
> #size-cells = <0>;
> status = "disabled";
> };
> +
> + i2c3: i2c@600 {
> + compatible = "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
> + <&dma0 AT91_XDMAC_DT_PERID(8)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> dma0: dma-controller@e0068000 {
> @@ -308,6 +360,19 @@ spi4: spi@400 {
> #size-cells = <0>;
> status = "disabled";
> };
> +
> + i2c4: i2c@600 {
> + compatible = "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
> + <&dma0 AT91_XDMAC_DT_PERID(10)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> timer0: timer@e008c000 {
> --
> 2.30.2
>
next prev parent reply other threads:[~2022-03-30 13:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 15:35 [PATCH v2 0/7] ARM: dts: lan966x: dtsi improvements and KSwitch D10 support Michael Walle
2022-03-04 15:35 ` [PATCH v2 1/7] ARM: dts: lan966x: swap dma channels for crypto node Michael Walle
2022-03-04 15:35 ` [PATCH v2 2/7] ARM: dts: lan966x: add sgpio node Michael Walle
2022-03-30 13:25 ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 3/7] ARM: dts: lan966x: add missing uart DMA channel Michael Walle
2022-03-30 13:25 ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 4/7] ARM: dts: lan966x: add all flexcom usart nodes Michael Walle
2022-03-30 13:25 ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 5/7] ARM: dts: lan966x: add flexcom SPI nodes Michael Walle
2022-03-30 13:26 ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 6/7] ARM: dts: lan966x: add flexcom I2C nodes Michael Walle
2022-03-30 13:26 ` Claudiu.Beznea [this message]
2022-03-04 15:35 ` [PATCH v2 7/7] ARM: dts: lan966x: add basic Kontron KSwitch D10 support Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4dcad1c3-c471-ce70-eecb-17f803f737b4@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=Kavyasree.Kotagiri@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@walle.cc \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox