[PATCH] xhci: EHCI/xHCI ports switching on Intense-PC.

[Denis Turischev <denis@compulab.co.il>]

Intense-PC is Compulab's mini-desktop with Intel Panther Point
chipset.

Unconditional ports switching provided by function
usb_enable_xhci_ports() leads to surprising results, after shutdown
system powered-on again after a few seconds. On Windows power
related problems were not observed.

The patch avoids ports switching for Intense-PC.

Signed-off-by: Denis Turischev <denis@compulab.co.il>
---
 drivers/usb/host/pci-quirks.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index df0828c..6f72593 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -759,6 +759,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 {
 	u32		ports_available;

+	const char *brd_name;
+	brd_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+	/* quirk for Compulab's Intense-PC board */
+	if (brd_name && strstr(brd_name, "Intense-PC"))
+		return;
+
 	/* Don't switchover the ports if the user hasn't compiled the xHCI
 	 * driver.  Otherwise they will see "dead" USB ports that don't power
 	 * the devices.
-- 
1.7.9.5