* [PATCH] firmware_map : unify argument of firmware_map_add_early/hotplug
@ 2012-07-17 2:17 Yasuaki Ishimatsu
2012-07-24 4:59 ` Yasuaki Ishimatsu
0 siblings, 1 reply; 2+ messages in thread
From: Yasuaki Ishimatsu @ 2012-07-17 2:17 UTC (permalink / raw)
To: linux-kernel; +Cc: tglx, mingo, hpa, tj, akpm, dave
There are two ways to create /sys/firmware/memmap/X sysfs:
- firmware_map_add_early
When the system starts, it is calledd from e820_reserve_resources()
- firmware_map_add_hotplug
When the memory is hot plugged, it is called from add_memory()
But these functions are called without unifying value of end argument as below:
- end argument of firmware_map_add_early() : start + size - 1
- end argument of firmware_map_add_hogplug() : start + size
The patch unifies them to "start + size". Even if applying the patch,
/sys/firmware/memmap/X/end file content does not change.
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@kernel.org>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Tejun Heo <tj@kernel.org>
CC: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
---
arch/x86/kernel/e820.c | 2 +-
drivers/firmware/memmap.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
Index: linux-next/arch/x86/kernel/e820.c
===================================================================
--- linux-next.orig/arch/x86/kernel/e820.c 2012-07-02 09:50:23.000000000 +0900
+++ linux-next/arch/x86/kernel/e820.c 2012-07-12 13:30:45.942318179 +0900
@@ -944,7 +944,7 @@
for (i = 0; i < e820_saved.nr_map; i++) {
struct e820entry *entry = &e820_saved.map[i];
firmware_map_add_early(entry->addr,
- entry->addr + entry->size - 1,
+ entry->addr + entry->size,
e820_type_to_string(entry->type));
}
}
Index: linux-next/drivers/firmware/memmap.c
===================================================================
--- linux-next.orig/drivers/firmware/memmap.c 2012-07-02 09:50:26.000000000 +0900
+++ linux-next/drivers/firmware/memmap.c 2012-07-12 13:40:53.823318481 +0900
@@ -98,7 +98,7 @@
/**
* firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
* @start: Start of the memory range.
- * @end: End of the memory range (inclusive).
+ * @end: End of the memory range.
* @type: Type of the memory range.
* @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
* entry.
@@ -113,7 +113,7 @@
BUG_ON(start > end);
entry->start = start;
- entry->end = end;
+ entry->end = end - 1;
entry->type = type;
INIT_LIST_HEAD(&entry->list);
kobject_init(&entry->kobj, &memmap_ktype);
@@ -148,7 +148,7 @@
* firmware_map_add_hotplug() - Adds a firmware mapping entry when we do
* memory hotplug.
* @start: Start of the memory range.
- * @end: End of the memory range (inclusive).
+ * @end: End of the memory range.
* @type: Type of the memory range.
*
* Adds a firmware mapping entry. This function is for memory hotplug, it is
@@ -175,7 +175,7 @@
/**
* firmware_map_add_early() - Adds a firmware mapping entry.
* @start: Start of the memory range.
- * @end: End of the memory range (inclusive).
+ * @end: End of the memory range.
* @type: Type of the memory range.
*
* Adds a firmware mapping entry. This function uses the bootmem allocator
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] firmware_map : unify argument of firmware_map_add_early/hotplug
2012-07-17 2:17 [PATCH] firmware_map : unify argument of firmware_map_add_early/hotplug Yasuaki Ishimatsu
@ 2012-07-24 4:59 ` Yasuaki Ishimatsu
0 siblings, 0 replies; 2+ messages in thread
From: Yasuaki Ishimatsu @ 2012-07-24 4:59 UTC (permalink / raw)
To: linux-kernel; +Cc: tglx, mingo, hpa, tj, akpm, dave
The patch is bugfix. So I want you to review it and merge into linux-3.6.
2012/07/17 11:17, Yasuaki Ishimatsu wrote:
> There are two ways to create /sys/firmware/memmap/X sysfs:
>
> - firmware_map_add_early
> When the system starts, it is calledd from e820_reserve_resources()
> - firmware_map_add_hotplug
> When the memory is hot plugged, it is called from add_memory()
>
> But these functions are called without unifying value of end argument as below:
>
> - end argument of firmware_map_add_early() : start + size - 1
> - end argument of firmware_map_add_hogplug() : start + size
>
> The patch unifies them to "start + size". Even if applying the patch,
> /sys/firmware/memmap/X/end file content does not change.
>
> CC: Thomas Gleixner <tglx@linutronix.de>
> CC: Ingo Molnar <mingo@kernel.org>
> CC: H. Peter Anvin <hpa@zytor.com>
> CC: Tejun Heo <tj@kernel.org>
> CC: Andrew Morton <akpm@linux-foundation.org>
> Reviewed-by: Dave Hansen <dave@linux.vnet.ibm.com>
> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
>
> ---
> arch/x86/kernel/e820.c | 2 +-
> drivers/firmware/memmap.c | 8 ++++----
> 2 files changed, 5 insertions(+), 5 deletions(-)
>
> Index: linux-next/arch/x86/kernel/e820.c
> ===================================================================
> --- linux-next.orig/arch/x86/kernel/e820.c 2012-07-02 09:50:23.000000000 +0900
> +++ linux-next/arch/x86/kernel/e820.c 2012-07-12 13:30:45.942318179 +0900
> @@ -944,7 +944,7 @@
> for (i = 0; i < e820_saved.nr_map; i++) {
> struct e820entry *entry = &e820_saved.map[i];
> firmware_map_add_early(entry->addr,
> - entry->addr + entry->size - 1,
> + entry->addr + entry->size,
> e820_type_to_string(entry->type));
> }
> }
> Index: linux-next/drivers/firmware/memmap.c
> ===================================================================
> --- linux-next.orig/drivers/firmware/memmap.c 2012-07-02 09:50:26.000000000 +0900
> +++ linux-next/drivers/firmware/memmap.c 2012-07-12 13:40:53.823318481 +0900
> @@ -98,7 +98,7 @@
> /**
> * firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
> * @start: Start of the memory range.
> - * @end: End of the memory range (inclusive).
> + * @end: End of the memory range.
> * @type: Type of the memory range.
> * @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
> * entry.
> @@ -113,7 +113,7 @@
> BUG_ON(start > end);
>
> entry->start = start;
> - entry->end = end;
> + entry->end = end - 1;
> entry->type = type;
> INIT_LIST_HEAD(&entry->list);
> kobject_init(&entry->kobj, &memmap_ktype);
> @@ -148,7 +148,7 @@
> * firmware_map_add_hotplug() - Adds a firmware mapping entry when we do
> * memory hotplug.
> * @start: Start of the memory range.
> - * @end: End of the memory range (inclusive).
> + * @end: End of the memory range.
> * @type: Type of the memory range.
> *
> * Adds a firmware mapping entry. This function is for memory hotplug, it is
> @@ -175,7 +175,7 @@
> /**
> * firmware_map_add_early() - Adds a firmware mapping entry.
> * @start: Start of the memory range.
> - * @end: End of the memory range (inclusive).
> + * @end: End of the memory range.
> * @type: Type of the memory range.
> *
> * Adds a firmware mapping entry. This function uses the bootmem allocator
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-07-24 4:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-17 2:17 [PATCH] firmware_map : unify argument of firmware_map_add_early/hotplug Yasuaki Ishimatsu
2012-07-24 4:59 ` Yasuaki Ishimatsu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox