From: Rajeev kumar <rajeev-dlh.kumar@st.com>
To: Ondrej Zary <linux@rainbow-software.org>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
Kernel development list <linux-kernel@vger.kernel.org>
Subject: Re: [alsa-devel] [PATCH] snd-opti9xx: Implement suspend/resume
Date: Tue, 17 Jul 2012 14:08:08 +0530 [thread overview]
Message-ID: <50052470.4060604@st.com> (raw)
In-Reply-To: <201207170916.44277.linux@rainbow-software.org>
Hello Ondrej,
On 7/17/2012 12:46 PM, Ondrej Zary wrote:
> Implement suspend/resume support for Opti 92x and 93x chips.
> Tested with Opti 929A+AD1848 and Opti 931.
>
> Signed-off-by: Ondrej Zary<linux@rainbow-software.org>
>
<snip...>
> +#ifdef CONFIG_PM
> +static int snd_opti9xx_suspend(struct snd_card *card)
> +{
> + struct snd_opti9xx *chip = card->private_data;
> +
> + snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
> + chip->codec->suspend(chip->codec);
> + return 0;
> +}
> +
> +static int snd_opti9xx_resume(struct snd_card *card)
> +{
> + struct snd_opti9xx *chip = card->private_data;
> + int error, xdma2;
> +#if defined(CS4231) || defined(OPTi93X)
> + xdma2 = dma2;
> +#else
> + xdma2 = -1;
> +#endif
> +
> + error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2,
> + mpu_port, mpu_irq);
dma1??
> + if (error)
> + return error;
Variable name is not convincing. You are assuming that the function is
returning error.
> + chip->codec->resume(chip->codec);
> + snd_power_change_state(card, SNDRV_CTL_POWER_D0);
blank line required.
> + return 0;
> +}
> +
> +static int snd_opti9xx_isa_suspend(struct device *dev, unsigned int n,
> + pm_message_t state)
> +{
> + return snd_opti9xx_suspend(dev_get_drvdata(dev));
> +}
> +
> +static int snd_opti9xx_isa_resume(struct device *dev, unsigned int n)
> +{
> + return snd_opti9xx_resume(dev_get_drvdata(dev));
> +}
> +#endif
> +
> static struct isa_driver snd_opti9xx_driver = {
> .match = snd_opti9xx_isa_match,
> .probe = snd_opti9xx_isa_probe,
> .remove = __devexit_p(snd_opti9xx_isa_remove),
> - /* FIXME: suspend/resume */
> +#ifdef CONFIG_PM
> + .suspend = snd_opti9xx_isa_suspend,
> + .resume = snd_opti9xx_isa_resume,
> +#endif
> .driver = {
> .name = DEV_NAME
> },
> @@ -1123,12 +1165,29 @@ static void __devexit snd_opti9xx_pnp_remove(struct pnp_card_link * pcard)
> snd_opti9xx_pnp_is_probed = 0;
> }
>
> +#ifdef CONFIG_PM
> +static int snd_opti9xx_pnp_suspend(struct pnp_card_link *pcard,
> + pm_message_t state)
> +{
> + return snd_opti9xx_suspend(pnp_get_card_drvdata(pcard));
> +}
> +
> +static int snd_opti9xx_pnp_resume(struct pnp_card_link *pcard)
> +{
> + return snd_opti9xx_resume(pnp_get_card_drvdata(pcard));
> +}
> +#endif
> +
> static struct pnp_card_driver opti9xx_pnpc_driver = {
> .flags = PNP_DRIVER_RES_DISABLE,
> .name = "opti9xx",
Why this is opti why not OPTi
~Rajeev
> .id_table = snd_opti9xx_pnpids,
> .probe = snd_opti9xx_pnp_probe,
> .remove = __devexit_p(snd_opti9xx_pnp_remove),
> +#ifdef CONFIG_PM
> + .suspend = snd_opti9xx_pnp_suspend,
> + .resume = snd_opti9xx_pnp_resume,
> +#endif
> };
> #endif
>
>
next prev parent reply other threads:[~2012-07-17 8:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-17 7:16 [PATCH] snd-opti9xx: Implement suspend/resume Ondrej Zary
2012-07-17 8:38 ` Rajeev kumar [this message]
2012-07-17 8:51 ` [alsa-devel] " Ondrej Zary
2012-07-17 9:01 ` Rajeev kumar
2012-07-17 8:57 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50052470.4060604@st.com \
--to=rajeev-dlh.kumar@st.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rainbow-software.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox