From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753961Ab2GQIqD (ORCPT ); Tue, 17 Jul 2012 04:46:03 -0400 Received: from slimlogic.co.uk ([89.16.172.20]:38295 "EHLO slimlogic.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751330Ab2GQIqA (ORCPT ); Tue, 17 Jul 2012 04:46:00 -0400 Message-ID: <50052645.4090301@slimlogic.co.uk> Date: Tue, 17 Jul 2012 09:45:57 +0100 From: Graeme Gregory User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:13.0) Gecko/20120615 Thunderbird/13.0.1 MIME-Version: 1.0 To: Axel Lin CC: Mark Brown , linux-kernel@vger.kernel.org, Liam Girdwood Subject: Re: [PATCH RFT] regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps References: <1342495743.16433.1.camel@phoenix> In-Reply-To: <1342495743.16433.1.camel@phoenix> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Good catch, thanks I totally forgot about the range bit in that function. Acked-by: Graeme Gregory On 17/07/12 04:29, Axel Lin wrote: > The logic of calculating selector in palmas_map_voltage_smps() does not match > the logic to list voltage in palmas_list_voltage_smps(). > > We use below equation to calculate voltage when selector > 0: > voltage = (0.49V + (selector * 0.01V)) * RANGE > RANGE is either x1 or x2 > > So we need to take into account with the multiplier set in VSEL register when > calculating selector in palmas_map_voltage_smps() > > Signed-off-by: Axel Lin > --- > drivers/regulator/palmas-regulator.c | 17 ++++++++++++++--- > 1 file changed, 14 insertions(+), 3 deletions(-) > > diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c > index 7540c95..17d19fb 100644 > --- a/drivers/regulator/palmas-regulator.c > +++ b/drivers/regulator/palmas-regulator.c > @@ -373,11 +373,22 @@ static int palmas_set_voltage_smps_sel(struct regulator_dev *dev, > static int palmas_map_voltage_smps(struct regulator_dev *rdev, > int min_uV, int max_uV) > { > + struct palmas_pmic *pmic = rdev_get_drvdata(rdev); > + int id = rdev_get_id(rdev); > int ret, voltage; > > - ret = ((min_uV - 500000) / 10000) + 1; > - if (ret < 0) > - return ret; > + if (min_uV == 0) > + return 0; > + > + if (pmic->range[id]) { /* RANGE is x2 */ > + if (min_uV < 1000000) > + min_uV = 1000000; > + ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 1; > + } else { /* RANGE is x1 */ > + if (min_uV < 500000) > + min_uV = 500000; > + ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 1; > + } > > /* Map back into a voltage to verify we're still in bounds */ > voltage = palmas_list_voltage_smps(rdev, ret);