Re: [RESEND PATCH 1/2] mfd: add irq domain support for max8997 interrupts

[Chanwoo Choi <cw00.choi@samsung.com>]

On 07/18/2012 01:34 AM, Greg KH wrote:

> On Mon, Jul 02, 2012 at 09:02:55AM +0900, Chanwoo Choi wrote:
>> From: Thomas Abraham <thomas.abraham@linaro.org>
>>
>> Add irq domain support for max8997 interrupts. The reverse mapping method
>> used is linear mapping since the sub-drivers of max8997 such as regulator
>> and charger drivers can use the max8997 irq_domain to get the linux irq
>> number for max8997 interrupts. All uses of irq_base in platform data and
>> max8997 driver private data are removed.
>>
>> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
>> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
>> 	[Fix two bug which set max8997->irq_domain and correct wrong parameter]
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>>  arch/arm/mach-exynos/mach-nuri.c    |    4 --
>>  arch/arm/mach-exynos/mach-origen.c  |    1 -
>>  drivers/mfd/Kconfig                 |    1 +
>>  drivers/mfd/max8997-irq.c           |   62 +++++++++++++++++++++--------------
>>  drivers/mfd/max8997.c               |    1 -
>>  include/linux/mfd/max8997-private.h |    4 ++-
>>  include/linux/mfd/max8997.h         |    1 -
>>  7 files changed, 41 insertions(+), 33 deletions(-)
> 
> Once again, this patch breaks the build.
> 
> Please be more careful with your patches, and TEST THEM BEFORE SENDING
> THEM OUT.
> 


I have posted patchset including below two patch. If only first patch is
applied to build test, this patch breaks the build. The second patch fix
that extcon-max8997 driver use irq_domain instead of irq_base field in
'struct max8997_dev'.

[PATCH v3 1/2] mfd: add irq domain support for max8997 interrupts
[PATCH v3 2/2] Extcon: MAX8997: Add support irq domain for MAX8997 muic

Please apply second patch when test this patchset.

Sorry, I didn't consolidate second patch in the first patch to resolve
build break because of converting  MUIC driver of MAX8997
from 'max8997-muic.c' to 'extcon-max8997.c'.

- http://lkml.org/lkml/2012/5/20/142

Best Regards,
Chanwoo Choi