From: Benoit Cousson <b-cousson@ti.com>
To: "Poddar, Sourav" <sourav.poddar@ti.com>
Cc: <devicetree-discuss@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Tony Lindgren <tony@atomide.com>,
Rob Herring <rob.herring@calxeda.com>,
Grant Likely <grant.likely@secretlab.ca>,
Felipe Balbi <balbi@ti.com>
Subject: Re: [PATCHv7] arm/dts: omap4-sdp: Add keypad data
Date: Mon, 20 Aug 2012 13:53:34 +0200 [thread overview]
Message-ID: <5032253E.9000106@ti.com> (raw)
In-Reply-To: <CAKdam57n1jA5_7EOLcsB=u5X4wX6hPVXoZ2HLrnpEKS3kLZ=OQ@mail.gmail.com>
Hi Sourav,
On 08/20/2012 01:19 PM, Poddar, Sourav wrote:
> Hi All,
>
> On Tue, Aug 14, 2012 at 4:45 PM, Sourav Poddar <sourav.poddar@ti.com> wrote:
>> Add keypad data node in omap4 device tree file.
>> Also fill the device tree binding parameters
>> with the required value in "omap4-sdp" dts file.
>>
>> Tested on omap4430 sdp.
>>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Benoit Cousson <b-cousson@ti.com>
>> Cc: Rob Herring <rob.herring@calxeda.com>
>> Cc: Grant Likely <grant.likely@secretlab.ca>
>> Cc: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
>> ---
>> v6->v7
>> Add key name as a comment.
>> arch/arm/boot/dts/omap4-sdp.dts | 70 +++++++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/omap4.dtsi | 5 +++
>> 2 files changed, 75 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
>> index 72216e9..8e200f4 100644
>> --- a/arch/arm/boot/dts/omap4-sdp.dts
>> +++ b/arch/arm/boot/dts/omap4-sdp.dts
>> @@ -113,6 +113,76 @@
>> "DMic", "Digital Mic",
>> "Digital Mic", "Digital Mic1 Bias";
>> };
>> +
>> + keypad {
>> + keypad,num-rows = <8>;
>> + keypad,num-columns = <8>;
>> + linux,keymap = < 0x00000012 /* KEY_E */
>> + 0x00010013 /* KEY_R */
>> + 0x00020014 /* KEY_T */
>> + 0x00030066 /* KEY_HOME */
>> + 0x0004003f /* KEY_F5 */
>> + 0x000500f0 /* KEY_UNKNOWN */
>> + 0x00060017 /* KEY_I */
>> + 0x0007002a /* KEY_LEFTSHIFT */
>> + 0x01000020 /* KEY_D*/
>> + 0x01010021 /* KEY_F */
>> + 0x01020022 /* KEY_G */
>> + 0x010300e7 /* KEY_SEND */
>> + 0x01040040 /* KEY_F6 */
>> + 0x010500f0 /* KEY_UNKNOWN */
>> + 0x01060025 /* KEY_K */
>> + 0x0107001c /* KEY_ENTER */
>> + 0x0200002d /* KEY_X */
>> + 0x0201002e /* KEY_C */
>> + 0x0202002f /* KEY_V */
>> + 0x0203006b /* KEY_END */
>> + 0x02040041 /* KEY_F7 */
>> + 0x020500f0 /* KEY_UNKNOWN */
>> + 0x02060034 /* KEY_DOT */
>> + 0x0207003a /* KEY_CAPSLOCK */
>> + 0x0300002c /* KEY_Z */
>> + 0x0301004e /* KEY_KPLUS */
>> + 0x03020030 /* KEY_B */
>> + 0x0303003b /* KEY_F1 */
>> + 0x03040042 /* KEY_F8 */
>> + 0x030500f0 /* KEY_UNKNOWN */
>> + 0x03060018 /* KEY_O */
>> + 0x03070039 /* KEY_SPACE */
>> + 0x04000011 /* KEY_W */
>> + 0x04010015 /* KEY_Y */
>> + 0x04020016 /* KEY_U */
>> + 0x0403003c /* KEY_F2 */
>> + 0x04040073 /* KEY_VOLUMEUP */
>> + 0x040500f0 /* KEY_UNKNOWN */
>> + 0x04060026 /* KEY_L */
>> + 0x04070069 /* KEY_LEFT */
>> + 0x0500001f /* KEY_S */
>> + 0x05010023 /* KEY_H */
>> + 0x05020024 /* KEY_J */
>> + 0x0503003d /* KEY_F3 */
>> + 0x05040043 /* KEY_F9 */
>> + 0x05050072 /* KEY_VOLUMEDOWN */
>> + 0x05060032 /* KEY_M */
>> + 0x0507006a /* KEY_RIGHT */
>> + 0x06000010 /* KEY_Q */
>> + 0x0601001e /* KEY_A */
>> + 0x06020031 /* KEY_N */
>> + 0x0603009e /* KEY_BACK */
>> + 0x0604000e /* KEY_BACKSPACE */
>> + 0x060500f0 /* KEY_UNKNOWN */
>> + 0x06060019 /* KEY_P */
>> + 0x06070067 /* KEY_UP */
>> + 0x07000094 /* KEY_PROG1 */
>> + 0x07010095 /* KEY_PROG2 */
>> + 0x070200ca /* KEY_PROG3 */
>> + 0x070300cb /* KEY_PROG4 */
>> + 0x0704003e /* KEY_F4 */
>> + 0x070500f0 /* KEY_UNKNOWN */
>> + 0x07060160 /* KEY_OK */
>> + 0x0707006c >; /* KEY_DOWN */
>> + linux,input-no-autorepeat;
>> + };
>> };
>>
>> &i2c1 {
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 04cbbcb..e78a1f1 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -296,4 +296,9 @@
>> ti,hwmods = "dmic";
>> };
>> };
>> +
>> + keypad {
>> + compatible = "ti,omap4-keypad";
>> + ti,hwmods = "kbd";
>> + };
>> };
>> --
>> 1.7.1
>>
> Any more comments on this?
That's perfect.
I'll take it and send it with other DT patches to Tony.
Regards,
Benoit
next prev parent reply other threads:[~2012-08-20 11:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 11:15 [PATCHv7] arm/dts: omap4-sdp: Add keypad data Sourav Poddar
2012-08-20 11:19 ` Poddar, Sourav
2012-08-20 11:34 ` Felipe Balbi
2012-08-20 11:53 ` Benoit Cousson [this message]
2012-08-20 11:56 ` Poddar, Sourav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5032253E.9000106@ti.com \
--to=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rob.herring@calxeda.com \
--cc=sourav.poddar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox