From: Randy Dunlap <rdunlap@xenotime.net>
To: "mr.shroom" <mr.shroom@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: Bug report
Date: Mon, 20 Aug 2012 15:43:35 -0700 [thread overview]
Message-ID: <5032BD97.7070701@xenotime.net> (raw)
In-Reply-To: <CAL=PgHMH=5A5rLaO=RvYYA8MmcKEt1zay7f2=SS83RYayVVh+w@mail.gmail.com>
(cc-ing linux-ide mailing list)
On 08/20/2012 03:31 PM, mr.shroom wrote:
> SATA for kernel(s) 3.5+ has an issue with IRQ Balancing on AMD SB710
> with motherboard ASRock m3a770d3.
>
> The problem started while using Arch linux, after going back to Debian
> it persisted. I had tried to find problems with the bug but couldn't
> find any direct help online. I had a break when finding similar bugs
> on other sites stating that IRQ Balancing might be the fault. So I
> tried ACPI_IRQ_NOBALANCE in the kernel boot parameters and so far the
> issue has stopped.
>
> Linux version 3.6.0-rc2 (mboy@debian) (gcc version 4.7.1 (Debian
> 4.7.1-6) ) #1 SMP Sat Aug 18 00:46:06 CDT 2012
>
> Aug 20 12:32:08 debian kernel: [42238.075368] ata4.00: exception Emask
> 0x0 SAct 0x7f SErr 0x0 action 0x6 frozen
> Aug 20 12:32:08 debian kernel: [42238.075373] ata4.00: failed command:
> WRITE FPDMA QUEUED
> Aug 20 12:32:08 debian kernel: [42238.075377] ata4.00: cmd
> 61/08:00:c8:0a:89/00:00:01:00:00/40 tag 0 ncq 4096 out
> Aug 20 12:32:08 debian kernel: [42238.075377] res
> 40/00:00:00:4f:c2/00:00:00:4f:c2/00 Emask 0x4 (timeout)
> Aug 20 12:32:08 debian kernel: [42238.075379] ata4.00: status: { DRDY }
> Aug 20 12:32:08 debian kernel: [42238.075381] ata4.00: failed command:
> WRITE FPDMA QUEUED
> Aug 20 12:32:08 debian kernel: [42238.075384] ata4.00: cmd
> 61/08:08:f8:cb:8a/00:00:03:00:00/40 tag 1 ncq 4096 out
> Aug 20 12:32:08 debian kernel: [42238.075384] res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Aug 20 12:32:08 debian kernel: [42238.075386] ata4.00: status: { DRDY }
> Aug 20 12:32:08 debian kernel: [42238.075388] ata4.00: failed command:
> WRITE FPDMA QUEUED
> Aug 20 12:32:08 debian kernel: [42238.075391] ata4.00: cmd
> 61/10:10:80:95:86/00:00:08:00:00/40 tag 2 ncq 8192 out
> Aug 20 12:32:08 debian kernel: [42238.075391] res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Aug 20 12:32:08 debian kernel: [42238.075393] ata4.00: status: { DRDY }
> Aug 20 12:32:08 debian kernel: [42238.075394] ata4.00: failed command:
> READ FPDMA QUEUED
> Aug 20 12:32:08 debian kernel: [42238.075397] ata4.00: cmd
> 60/60:18:60:71:62/00:00:00:00:00/40 tag 3 ncq 49152 in
> Aug 20 12:32:08 debian kernel: [42238.075397] res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Aug 20 12:32:08 debian kernel: [42238.075399] ata4.00: status: { DRDY }
> Aug 20 12:32:08 debian kernel: [42238.075401] ata4.00: failed command:
> READ FPDMA QUEUED
> Aug 20 12:32:08 debian kernel: [42238.075404] ata4.00: cmd
> 60/08:20:c8:71:62/00:00:00:00:00/40 tag 4 ncq 4096 in
> Aug 20 12:32:08 debian kernel: [42238.075404] res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Aug 20 12:32:08 debian kernel: [42238.075406] ata4.00: status: { DRDY }
> Aug 20 12:32:08 debian kernel: [42238.075407] ata4.00: failed command:
> READ FPDMA QUEUED
> Aug 20 12:32:08 debian kernel: [42238.075410] ata4.00: cmd
> 60/18:28:d8:71:62/00:00:00:00:00/40 tag 5 ncq 12288 in
> Aug 20 12:32:08 debian kernel: [42238.075410] res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Aug 20 12:32:08 debian kernel: [42238.075412] ata4.00: status: { DRDY }
> Aug 20 12:32:08 debian kernel: [42238.075413] ata4.00: failed command:
> READ FPDMA QUEUED
> Aug 20 12:32:08 debian kernel: [42238.075417] ata4.00: cmd
> 60/08:30:f8:71:62/00:00:00:00:00/40 tag 6 ncq 4096 in
> Aug 20 12:32:08 debian kernel: [42238.075417] res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Aug 20 12:32:08 debian kernel: [42238.075418] ata4.00: status: { DRDY }
> Aug 20 12:32:08 debian kernel: [42238.075422] ata4: hard resetting link
>
> After it would reset, it would try SATA I, fail, then mount the drive
> as RO. I'm running a Phenom II on Debian Wheezy with a bit of Sid,
> don't have the time at the moment to get a better grasp on what you
> need for a proper bug report but I hope this helps.
> --
--
~Randy
next prev parent reply other threads:[~2012-08-20 22:43 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-20 22:31 Bug report mr.shroom
2012-08-20 22:43 ` Randy Dunlap [this message]
2012-08-20 23:16 ` Alan Cox
2012-08-21 9:37 ` Borislav Petkov
-- strict thread matches above, loose matches on Subject: below --
2011-10-28 15:55 Hendrik Knackstedt
2011-07-19 17:34 Bug Report Charles Opondo
2011-07-20 15:38 ` Bjorn Helgaas
2008-11-03 18:30 bug report Todor Gyumyushev
2008-09-25 14:08 Todor Gyumyushev
2008-09-24 9:41 Todor Gyumyushev
2008-09-24 16:38 ` Simon Holm Thøgersen
2008-09-24 17:55 ` Todor Gyumyushev
2008-09-24 18:25 ` Simon Holm Thøgersen
2008-09-29 1:36 ` Tejun Heo
2008-09-29 8:30 ` Todor Gyumyushev
2008-09-30 11:47 ` Tejun Heo
2008-06-06 19:59 Zsiros Attila
2008-06-07 1:44 ` Oliver Pinter
2008-06-07 1:45 ` Oliver Pinter
2008-06-07 5:56 ` Andrew Morton
2008-06-07 8:47 ` Ilpo Järvinen
2008-06-07 12:50 ` Oliver Pinter
2008-06-07 15:09 ` Phil Oester
2008-06-07 18:53 ` Oliver Pinter
2008-06-08 11:56 ` Zsiros Attila
2008-06-09 17:04 ` Oliver Pinter
2006-07-09 2:04 BUG report Antonio Mignolli
2006-07-12 10:56 ` Markus Rechberger
2004-12-25 13:00 Bug report Ioannis Fikouras
2004-03-03 10:47 Manivannan Shanmugam
2002-10-04 15:01 bug report Sander Kamphuis
2002-10-04 15:32 ` Paulo Andre'
2002-10-04 15:35 ` Adrian Bunk
2002-04-24 9:15 Pan,Gaoyong
2002-03-04 16:04 Vitaly Fertman
2001-11-27 15:04 Bug (?) report Matteo Sasso
2001-11-27 15:51 ` Tommy Reynolds
2001-11-10 19:01 Bug Report Logoth Dragon
2001-11-10 19:08 ` Alan Cox
2001-08-02 9:38 Bug report Daniel Glozman
2001-03-22 20:58 Craig Cummings
2001-03-22 21:43 ` Tim Walberg
2001-02-01 22:09 Anders S. Buch
2001-02-03 1:44 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5032BD97.7070701@xenotime.net \
--to=rdunlap@xenotime.net \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mr.shroom@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox