[PATCH v15 0/4] Initial Marvell PXA1908 support

[PATCH v15 0/4] Initial Marvell PXA1908 support

[Duje Mihanović via B4 Relay]

Hello,

This series adds initial support for the Marvell PXA1908 SoC and
"samsung,coreprimevelte", a smartphone using the SoC.

USB works and the phone can boot a rootfs from an SD card, but there are
some warnings in the dmesg:

During SMP initialization:
[    0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
[    0.006542] CPU features: Unsupported CPU feature variation detected.
[    0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
[    0.010710] Detected VIPT I-cache on CPU2
[    0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
[    0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
[    0.014849] Detected VIPT I-cache on CPU3
[    0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
[    0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]

SMMU probing fails:
[    0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
[    0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
[    0.101816] arm-smmu c0010000.iommu:         no translation support!

A 3.14 based Marvell tree is available on GitHub
acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
CoderCharmander/g361f-kernel.

Andreas Färber attempted to upstream support for this SoC in 2017:
https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@suse.de/

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
Changes in v15:
- Update trailers
- Move device trees to mmp/ subdirectory
- Remove excess newline in board dts
- Add soc@ to Cc list
- Drop tree from MAINTAINERS
- Rebase to v6.15-rc1
- Link to v14: https://lore.kernel.org/r/20250115-pxa1908-lkml-v14-0-847d24f3665a@skole.hr

Changes in v14:
- Rebase on v6.13-rc7, dropping everything except DT
- Link to v13: https://lore.kernel.org/r/20241001-pxa1908-lkml-v13-0-6b9a7f64f9ae@skole.hr

Changes in v13:
- Better describe the hardware in bindings/arm commit message
- Rebase on v6.12-rc1
- Link to v12: https://lore.kernel.org/r/20240823-pxa1908-lkml-v12-0-cc3ada51beb0@skole.hr

Changes in v12:
- Rebase on v6.11-rc4
- Fix schmitt properties in accordance with 78d8815031fb ("dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties")
- Drop a few redundant includes in clock drivers
- Link to v11: https://lore.kernel.org/r/20240730-pxa1908-lkml-v11-0-21dbb3e28793@skole.hr

Changes in v11:
- Rebase on v6.11-rc1 (conflict with DTS Makefile), no changes
- Link to v10: https://lore.kernel.org/r/20240424-pxa1908-lkml-v10-0-36cdfb5841f9@skole.hr

Changes in v10:
- Update trailers
- Rebase on v6.9-rc5
- Clock driver changes:
  - Add a couple of forgotten clocks in APBC
    - The clocks are thermal_clk, ipc_clk, ssp0_clk, ssp2_clk and swjtag
    - The IDs and register offsets were already present, but I forgot to
      actually register them
  - Split each controller block into own file
  - Drop unneeded -of in clock driver filenames
  - Simplify struct pxa1908_clk_unit
  - Convert to platform driver
  - Add module metadata
- DTS changes:
  - Properly name pinctrl nodes
  - Drop pinctrl #size-cells, #address-cells, ranges and #gpio-size-cells
  - Fix pinctrl input-schmitt configuration
- Link to v9: https://lore.kernel.org/20240402-pxa1908-lkml-v9-0-25a003e83c6f@skole.hr

Changes in v9:
- Update trailers and rebase on v6.9-rc2, no changes
- Link to v8: https://lore.kernel.org/20240110-pxa1908-lkml-v8-0-fea768a59474@skole.hr

Changes in v8:
- Drop SSPA patch
- Drop broken-cd from eMMC node
- Specify S-Boot hardcoded initramfs location in device tree
- Add ARM PMU node
- Correct inverted modem memory base and size
- Update trailers
- Rebase on next-20240110
- Link to v7: https://lore.kernel.org/20231102-pxa1908-lkml-v7-0-cabb1a0cb52b@skole.hr
  and https://lore.kernel.org/20231102152033.5511-1-duje.mihanovic@skole.hr

Changes in v7:
- Suppress SND_MMP_SOC_SSPA on ARM64
- Update trailers
- Rebase on v6.6-rc7
- Link to v6: https://lore.kernel.org/r/20231010-pxa1908-lkml-v6-0-b2fe09240cf8@skole.hr

Changes in v6:
- Address maintainer comments:
  - Add "marvell,pxa1908-padconf" binding to pinctrl-single driver
- Drop GPIO patch as it's been pulled
- Update trailers
- Rebase on v6.6-rc5
- Link to v5: https://lore.kernel.org/r/20230812-pxa1908-lkml-v5-0-a5d51937ee34@skole.hr

Changes in v5:
- Address maintainer comments:
  - Move *_NR_CLKS to clock driver from dt binding file
- Allocate correct number of clocks for each block instead of blindly
  allocating 50 for each
- Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b452@skole.hr

Changes in v4:
- Address maintainer comments:
  - Relicense clock binding file to BSD-2
- Add pinctrl-names to SD card node
- Add vgic registers to GIC node
- Rebase on v6.5-rc5
- Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr

Changes in v3:
- Address maintainer comments:
  - Drop GPIO dynamic allocation patch
  - Move clock register offsets into driver (instead of bindings file)
  - Add missing Tested-by trailer to u32_fract patch
  - Move SoC binding to arm/mrvl/mrvl.yaml
- Add serial0 alias and stdout-path to board dts to enable UART
  debugging
- Rebase on v6.5-rc4
- Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihanovic@skole.hr

Changes in v2:
- Remove earlycon patch as it's been merged into tty-next
- Address maintainer comments:
  - Clarify GPIO regressions on older PXA platforms
  - Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
  - Add missing includes to clock driver
  - Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
  - Dual license clock bindings
  - Change clock IDs to decimal
  - Fix underscores in dt node names
  - Move chosen node to top of board dts
  - Clean up documentation
  - Reorder commits
  - Drop pxa,rev-id
- Rename muic-i2c to i2c-muic
- Reword some commits
- Move framebuffer node to chosen
- Add aliases for mmc nodes
- Rebase on v6.5-rc3
- Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihanovic@skole.hr

---
Duje Mihanović (4):
      dt-bindings: marvell: Document PXA1908 SoC and samsung,coreprimevelte
      arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
      arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
      MAINTAINERS: add myself as Marvell PXA1908 maintainer

 .../devicetree/bindings/arm/mrvl/mrvl.yaml         |   5 +
 MAINTAINERS                                        |   8 +
 arch/arm64/Kconfig.platforms                       |   8 +
 arch/arm64/boot/dts/marvell/Makefile               |   2 +
 arch/arm64/boot/dts/marvell/mmp/Makefile           |   2 +
 .../marvell/mmp/pxa1908-samsung-coreprimevelte.dts | 335 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi       | 300 ++++++++++++++++++
 7 files changed, 660 insertions(+)
---
base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8
change-id: 20230803-pxa1908-lkml-6830e8da45c7

Best regards,
-- 
Duje Mihanović <duje.mihanovic@skole.hr>

[PATCH v15 1/4] dt-bindings: marvell: Document PXA1908 SoC and samsung,coreprimevelte

[Duje Mihanović via B4 Relay]

From: Duje Mihanović <duje.mihanovic@skole.hr>

Add dt bindings for the Marvell PXA1908 SoC and the Samsung Galaxy Core
Prime VE LTE phone (model number SM-G361F) using the SoC.

The SoC comes with 4 Cortex-A53 cores clocked up to ~1.2GHz and a
Vivante GC7000UL GPU. The phone also has a 4.5" 480x800 touchscreen, 8GB
eMMC and 1GB of LPDDR3 RAM.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index 4c43eaf3632e4ec8e7d9aeac62f7204e2af4405a..f73bb8ec3a1a1b9594eb059b72d95dcbf8c87c6b 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -35,6 +35,11 @@ properties:
           - enum:
               - dell,wyse-ariel
           - const: marvell,mmp3
+      - description: PXA1908 based boards
+        items:
+          - enum:
+              - samsung,coreprimevelte
+          - const: marvell,pxa1908
 
 additionalProperties: true
 

-- 
2.49.0

[PATCH v15 2/4] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform

[Duje Mihanović via B4 Relay]

From: Duje Mihanović <duje.mihanovic@skole.hr>

Add ARCH_MMP configuration option for Marvell PXA1908 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm64/Kconfig.platforms | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 8b76821f190fcf5cbb5db3a5de211279c23c2c59..858ccd72eb353ac31164a845cce1e1349e9c996e 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -178,6 +178,14 @@ config ARCH_MESON
 	  This enables support for the arm64 based Amlogic SoCs
 	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
 
+config ARCH_MMP
+	bool "Marvell MMP SoC Family"
+	select PINCTRL
+	select PINCTRL_SINGLE
+	help
+	  This enables support for Marvell MMP SoC family, currently
+	  supporting PXA1908 aka IAP140.
+
 config ARCH_MVEBU
 	bool "Marvell EBU SoC Family"
 	select ARMADA_AP806_SYSCON

-- 
2.49.0

[PATCH v15 3/4] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte

[Duje Mihanović via B4 Relay]

From: Duje Mihanović <duje.mihanovic@skole.hr>

Add DTS for Marvell PXA1908 SoC and Samsung Galaxy Core Prime Value
Edition LTE, a smartphone based on said SoC.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm64/boot/dts/marvell/Makefile               |   2 +
 arch/arm64/boot/dts/marvell/mmp/Makefile           |   2 +
 .../marvell/mmp/pxa1908-samsung-coreprimevelte.dts | 335 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi       | 300 ++++++++++++++++++
 4 files changed, 639 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index ce751b5028e2628834340b5c50f8992092226eba..40e5ac6cd4683e1213224b54dc7879a0c698f7c8 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -32,3 +32,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb
+
+subdir-y	+= mmp
diff --git a/arch/arm64/boot/dts/marvell/mmp/Makefile b/arch/arm64/boot/dts/marvell/mmp/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..103175ed63b00aca59cf603163998cde9ec851e2
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
new file mode 100644
index 0000000000000000000000000000000000000000..e1a6d0b9a3299e2d8c796876c9eeaa8e19c52bbd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy Core Prime VE LTE";
+	compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+	aliases {
+		mmc0 = &sdh2; /* eMMC */
+		mmc1 = &sdh0; /* SD card */
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		/* S-Boot places the initramfs here */
+		linux,initrd-start = <0x4d70000>;
+		linux,initrd-end = <0x5000000>;
+
+		fb0: framebuffer@17177000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x17177000 0 (480 * 800 * 4)>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/* Bootloader fills this in */
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@17000000 {
+			reg = <0 0x17000000 0 0x1800000>;
+			no-map;
+		};
+
+		gpu@9000000 {
+			reg = <0 0x9000000 0 0x1000000>;
+		};
+
+		/* Communications processor, aka modem */
+		cp@5000000 {
+			reg = <0 0x5000000 0 0x3000000>;
+		};
+
+		cm3@a000000 {
+			reg = <0 0xa000000 0 0x80000>;
+		};
+
+		seclog@8000000 {
+			reg = <0 0x8000000 0 0x100000>;
+		};
+
+		ramoops@8100000 {
+			compatible = "ramoops";
+			reg = <0 0x8100000 0 0x40000>;
+			record-size = <0x8000>;
+			console-size = <0x20000>;
+			max-reason = <5>;
+		};
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <3>;
+		i2c-gpio,timeout-ms = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_muic_pins>;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		key-voldown {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&pmx {
+	pinctrl-single,gpio-range = <&range 55 55 0>,
+				    <&range 110 32 0>,
+				    <&range 52 1 0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_pins_0 &board_pins_1 &board_pins_2>;
+
+	board_pins_0: board-pins-0 {
+		pinctrl-single,pins = <
+			0x160 0
+			0x164 0
+			0x168 0
+			0x16c 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_1: board-pins-1 {
+		pinctrl-single,pins = <
+			0x44 1
+			0x48 1
+			0x20 1
+			0x18 1
+			0x14 1
+			0x10 1
+			0xc 1
+			0x8 1
+			0x68 1
+			0x58 0
+			0x54 0
+			0x7c 0
+			0x6c 0
+			0x70 0
+			0x4c 1
+			0x50 1
+			0xac 0
+			0x90 0
+			0x8c 0
+			0x88 0
+			0x84 0
+			0xc8 0
+			0x128 0
+			0x190 0
+			0x194 0
+			0x1a0 0
+			0x114 0
+			0x118 0
+			0x1d8 0
+			0x1e4 0
+			0xe8 0
+			0x100 0
+			0x204 0
+			0x210 0
+			0x218 0
+		>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_2: board-pins-2 {
+		pinctrl-single,pins = <
+			0x260 0
+			0x264 0
+			0x268 0
+			0x26c 0
+			0x270 0
+			0x274 0
+			0x78 0
+			0x74 0
+			0xb0 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	uart0_pins: uart0-pins {
+		pinctrl-single,pins = <
+			0x198 6
+			0x19c 6
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pinctrl-single,pins = <
+			0x11c 0
+			0x120 0
+			0x1a4 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	i2c_muic_pins: i2c-muic-pins {
+		pinctrl-single,pins = <
+			0x154 0
+			0x150 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	sdh0_pins_0: sdh0-pins-0 {
+		pinctrl-single,pins = <
+			0x108 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_1: sdh0-pins-1 {
+		pinctrl-single,pins = <
+			0x94 0
+			0x98 0
+			0x9c 0
+			0xa0 0
+			0xa4 0
+		>;
+		pinctrl-single,drive-strength = <0x800 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_2: sdh0-pins-2 {
+		pinctrl-single,pins = <
+			0xa8 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&twsi2 {
+	status = "okay";
+};
+
+&twsi3 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+	/* Disabled for now because initialization fails with -ETIMEDOUT. */
+	status = "disabled";
+	bus-width = <8>;
+	non-removable;
+	mmc-ddr-1_8v;
+};
+
+&sdh0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>;
+	cd-gpios = <&gpio 11 0>;
+	cd-inverted;
+	bus-width = <4>;
+	wp-inverted;
+};
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..cf2b9109688ce560eec8a1397251ead68d78a239
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+/ {
+	model = "Marvell Armada PXA1908";
+	compatible = "marvell,pxa1908";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 3>;
+			enable-method = "psci";
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smmu: iommu@c0010000 {
+			compatible = "arm,mmu-400";
+			reg = <0 0xc0010000 0 0x10000>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@d1df9000 {
+			compatible = "arm,gic-400";
+			reg = <0 0xd1df9000 0 0x1000>,
+				<0 0xd1dfa000 0 0x2000>,
+				/* The subsequent registers are guesses. */
+				<0 0xd1dfc000 0 0x2000>,
+				<0 0xd1dfe000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4000000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4000000 0x200000>;
+
+			pdma: dma-controller@0 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <30>;
+				#dma-cells = <2>;
+			};
+
+			twsi1: i2c@10800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10800 0x64>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI1>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi0: i2c@11000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x11000 0x64>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi3: i2c@13800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x13800 0x64>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI3>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbc: clock-controller@15000 {
+				compatible = "marvell,pxa1908-apbc";
+				reg = <0x15000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@17000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x17000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART0>;
+				reg-shift = <2>;
+			};
+
+			uart1: serial@18000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x18000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART1>;
+				reg-shift = <2>;
+			};
+
+			gpio: gpio@19000 {
+				compatible = "marvell,mmp-gpio";
+				reg = <0x19000 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&apbc PXA1908_CLK_GPIO>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges = <0 0x19000 0x800>;
+
+				gpio@0 {
+					reg = <0x0 0x4>;
+				};
+
+				gpio@4 {
+					reg = <0x4 0x4>;
+				};
+
+				gpio@8 {
+					reg = <0x8 0x4>;
+				};
+
+				gpio@100 {
+					reg = <0x100 0x4>;
+				};
+			};
+
+			pmx: pinmux@1e000 {
+				compatible = "marvell,pxa1908-padconf", "pinconf-single";
+				reg = <0x1e000 0x330>;
+
+				#pinctrl-cells = <1>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <7>;
+
+				range: gpio-range {
+					#pinctrl-single,gpio-range-cells = <3>;
+				};
+			};
+
+			uart2: serial@36000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x36000 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_UART2>;
+				reg-shift = <2>;
+			};
+
+			twsi2: i2c@37000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x37000 0x64>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_TWSI2>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbcp: clock-controller@3b000 {
+				compatible = "marvell,pxa1908-apbcp";
+				reg = <0x3b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			mpmu: clock-controller@50000 {
+				compatible = "marvell,pxa1908-mpmu";
+				reg = <0x50000 0x1000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4200000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4200000 0x200000>;
+
+			usbphy: phy@7000 {
+				compatible = "marvell,pxa1928-usb-phy";
+				reg = <0x7000 0x200>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				#phy-cells = <0>;
+			};
+
+			usb: usb@8000 {
+				compatible = "chipidea,usb2";
+				reg = <0x8000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				phys = <&usbphy>;
+				phy-names = "usb-phy";
+			};
+
+			sdh0: mmc@80000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH0>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh1: mmc@80800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80800 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH1>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh2: mmc@81000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x81000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH2>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			apmu: clock-controller@82800 {
+				compatible = "marvell,pxa1908-apmu";
+				reg = <0x82800 0x400>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+};

-- 
2.49.0

[PATCH v15 4/4] MAINTAINERS: add myself as Marvell PXA1908 maintainer

[Duje Mihanović via B4 Relay]

From: Duje Mihanović <duje.mihanovic@skole.hr>

Add myself as the maintainer for Marvell PXA1908 SoC support.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 96b82704950184bd71623ff41fc4df31e4c7fe87..649b70ac8b96ea0bb91e3c641517c334c85270f3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2717,6 +2717,14 @@ F:	drivers/irqchip/irq-mvebu-*
 F:	drivers/pinctrl/mvebu/
 F:	drivers/rtc/rtc-armada38x.c
 
+ARM/Marvell PXA1908 SOC support
+M:	Duje Mihanović <duje.mihanovic@skole.hr>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm64/boot/dts/marvell/pxa1908*
+F:	drivers/clk/mmp/clk-pxa1908*.c
+F:	include/dt-bindings/clock/marvell,pxa1908.h
+
 ARM/Mediatek RTC DRIVER
 M:	Eddie Huang <eddie.huang@mediatek.com>
 M:	Sean Wang <sean.wang@mediatek.com>

-- 
2.49.0

Re: [PATCH v15 0/4] Initial Marvell PXA1908 support

[Rob Herring (Arm)]

On Mon, 07 Apr 2025 22:02:11 +0200, Duje Mihanović wrote:
> Hello,
> 
> This series adds initial support for the Marvell PXA1908 SoC and
> "samsung,coreprimevelte", a smartphone using the SoC.
> 
> USB works and the phone can boot a rootfs from an SD card, but there are
> some warnings in the dmesg:
> 
> During SMP initialization:
> [    0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
> [    0.006542] CPU features: Unsupported CPU feature variation detected.
> [    0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
> [    0.010710] Detected VIPT I-cache on CPU2
> [    0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
> [    0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
> [    0.014849] Detected VIPT I-cache on CPU3
> [    0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
> [    0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]
> 
> SMMU probing fails:
> [    0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
> [    0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
> [    0.101816] arm-smmu c0010000.iommu:         no translation support!
> 
> A 3.14 based Marvell tree is available on GitHub
> acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
> CoderCharmander/g361f-kernel.
> 
> Andreas Färber attempted to upstream support for this SoC in 2017:
> https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@suse.de/
> 
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> ---
> Changes in v15:
> - Update trailers
> - Move device trees to mmp/ subdirectory
> - Remove excess newline in board dts
> - Add soc@ to Cc list
> - Drop tree from MAINTAINERS
> - Rebase to v6.15-rc1
> - Link to v14: https://lore.kernel.org/r/20250115-pxa1908-lkml-v14-0-847d24f3665a@skole.hr
> 
> Changes in v14:
> - Rebase on v6.13-rc7, dropping everything except DT
> - Link to v13: https://lore.kernel.org/r/20241001-pxa1908-lkml-v13-0-6b9a7f64f9ae@skole.hr
> 
> Changes in v13:
> - Better describe the hardware in bindings/arm commit message
> - Rebase on v6.12-rc1
> - Link to v12: https://lore.kernel.org/r/20240823-pxa1908-lkml-v12-0-cc3ada51beb0@skole.hr
> 
> Changes in v12:
> - Rebase on v6.11-rc4
> - Fix schmitt properties in accordance with 78d8815031fb ("dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties")
> - Drop a few redundant includes in clock drivers
> - Link to v11: https://lore.kernel.org/r/20240730-pxa1908-lkml-v11-0-21dbb3e28793@skole.hr
> 
> Changes in v11:
> - Rebase on v6.11-rc1 (conflict with DTS Makefile), no changes
> - Link to v10: https://lore.kernel.org/r/20240424-pxa1908-lkml-v10-0-36cdfb5841f9@skole.hr
> 
> Changes in v10:
> - Update trailers
> - Rebase on v6.9-rc5
> - Clock driver changes:
>   - Add a couple of forgotten clocks in APBC
>     - The clocks are thermal_clk, ipc_clk, ssp0_clk, ssp2_clk and swjtag
>     - The IDs and register offsets were already present, but I forgot to
>       actually register them
>   - Split each controller block into own file
>   - Drop unneeded -of in clock driver filenames
>   - Simplify struct pxa1908_clk_unit
>   - Convert to platform driver
>   - Add module metadata
> - DTS changes:
>   - Properly name pinctrl nodes
>   - Drop pinctrl #size-cells, #address-cells, ranges and #gpio-size-cells
>   - Fix pinctrl input-schmitt configuration
> - Link to v9: https://lore.kernel.org/20240402-pxa1908-lkml-v9-0-25a003e83c6f@skole.hr
> 
> Changes in v9:
> - Update trailers and rebase on v6.9-rc2, no changes
> - Link to v8: https://lore.kernel.org/20240110-pxa1908-lkml-v8-0-fea768a59474@skole.hr
> 
> Changes in v8:
> - Drop SSPA patch
> - Drop broken-cd from eMMC node
> - Specify S-Boot hardcoded initramfs location in device tree
> - Add ARM PMU node
> - Correct inverted modem memory base and size
> - Update trailers
> - Rebase on next-20240110
> - Link to v7: https://lore.kernel.org/20231102-pxa1908-lkml-v7-0-cabb1a0cb52b@skole.hr
>   and https://lore.kernel.org/20231102152033.5511-1-duje.mihanovic@skole.hr
> 
> Changes in v7:
> - Suppress SND_MMP_SOC_SSPA on ARM64
> - Update trailers
> - Rebase on v6.6-rc7
> - Link to v6: https://lore.kernel.org/r/20231010-pxa1908-lkml-v6-0-b2fe09240cf8@skole.hr
> 
> Changes in v6:
> - Address maintainer comments:
>   - Add "marvell,pxa1908-padconf" binding to pinctrl-single driver
> - Drop GPIO patch as it's been pulled
> - Update trailers
> - Rebase on v6.6-rc5
> - Link to v5: https://lore.kernel.org/r/20230812-pxa1908-lkml-v5-0-a5d51937ee34@skole.hr
> 
> Changes in v5:
> - Address maintainer comments:
>   - Move *_NR_CLKS to clock driver from dt binding file
> - Allocate correct number of clocks for each block instead of blindly
>   allocating 50 for each
> - Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b452@skole.hr
> 
> Changes in v4:
> - Address maintainer comments:
>   - Relicense clock binding file to BSD-2
> - Add pinctrl-names to SD card node
> - Add vgic registers to GIC node
> - Rebase on v6.5-rc5
> - Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr
> 
> Changes in v3:
> - Address maintainer comments:
>   - Drop GPIO dynamic allocation patch
>   - Move clock register offsets into driver (instead of bindings file)
>   - Add missing Tested-by trailer to u32_fract patch
>   - Move SoC binding to arm/mrvl/mrvl.yaml
> - Add serial0 alias and stdout-path to board dts to enable UART
>   debugging
> - Rebase on v6.5-rc4
> - Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihanovic@skole.hr
> 
> Changes in v2:
> - Remove earlycon patch as it's been merged into tty-next
> - Address maintainer comments:
>   - Clarify GPIO regressions on older PXA platforms
>   - Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
>   - Add missing includes to clock driver
>   - Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
>   - Dual license clock bindings
>   - Change clock IDs to decimal
>   - Fix underscores in dt node names
>   - Move chosen node to top of board dts
>   - Clean up documentation
>   - Reorder commits
>   - Drop pxa,rev-id
> - Rename muic-i2c to i2c-muic
> - Reword some commits
> - Move framebuffer node to chosen
> - Add aliases for mmc nodes
> - Rebase on v6.5-rc3
> - Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihanovic@skole.hr
> 
> ---
> Duje Mihanović (4):
>       dt-bindings: marvell: Document PXA1908 SoC and samsung,coreprimevelte
>       arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
>       arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
>       MAINTAINERS: add myself as Marvell PXA1908 maintainer
> 
>  .../devicetree/bindings/arm/mrvl/mrvl.yaml         |   5 +
>  MAINTAINERS                                        |   8 +
>  arch/arm64/Kconfig.platforms                       |   8 +
>  arch/arm64/boot/dts/marvell/Makefile               |   2 +
>  arch/arm64/boot/dts/marvell/mmp/Makefile           |   2 +
>  .../marvell/mmp/pxa1908-samsung-coreprimevelte.dts | 335 +++++++++++++++++++++
>  arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi       | 300 ++++++++++++++++++
>  7 files changed, 660 insertions(+)
> ---
> base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8
> change-id: 20230803-pxa1908-lkml-6830e8da45c7
> 
> Best regards,
> --
> Duje Mihanović <duje.mihanovic@skole.hr>
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: using specified base-commit 0af2f6be1b4281385b618cb86ad946eded089ac8

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/marvell/' for 20250407-pxa1908-lkml-v15-0-e83ef101f944@skole.hr:

arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dtb: / (samsung,coreprimevelte): memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0, 0, 0]]}
	from schema $id: http://devicetree.org/schemas/root-node.yaml#
arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dtb: mmc@80000 (mrvl,pxav3-mmc): pinctrl-names: ['default'] is too short
	from schema $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dtb: mmc@80000 (mrvl,pxav3-mmc): Unevaluated properties are not allowed ('pinctrl-names' was unexpected)
	from schema $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#

Re: [PATCH v15 0/4] Initial Marvell PXA1908 support

[Arnd Bergmann]

On Mon, Apr 7, 2025, at 22:02, Duje Mihanović via B4 Relay wrote:
>
> This series adds initial support for the Marvell PXA1908 SoC and
> "samsung,coreprimevelte", a smartphone using the SoC.
>
...
>
> Andreas Färber attempted to upstream support for this SoC in 2017:
> https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@suse.de/
>
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>

Hi Duje,

I see you last posted this a few months ago and there was only
a small warning that Rob reported. Are you planning to send
an updated v16 of the series for it?

       Arnd

Re: [PATCH v15 0/4] Initial Marvell PXA1908 support

[Duje Mihanović]

Hello Arnd,

On Friday, 4 July 2025 17:24:13 Central European Summer Time Arnd Bergmann 
wrote:
> I see you last posted this a few months ago and there was only
> a small warning that Rob reported. Are you planning to send
> an updated v16 of the series for it?

Yes, I have fixed those warnings and will send v16 shortly.

Regards,
-- 
Duje