Re: RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

Thanasis
2012-09-21T19:20:28Z

So far, ping has failed *only* at this iteration of the make loop:

HEAD is now at b087148 r8169: support control of advertising.
make -C /lib/modules/2.6.38-r8/build
M=/mnt/usb-disk/atom/usr/src/test-r8169/r8169 modules
make[1]: Entering directory `/usr/src/linux-2.6.38-r8'
CC [M] /mnt/usb-disk/atom/usr/src/test-r8169/r8169/r8169.o
Building modules, stage 2.
MODPOST 1 modules
CC /mnt/usb-disk/atom/usr/src/test-r8169/r8169/r8169.mod.o
LD [M] /mnt/usb-disk/atom/usr/src/test-r8169/r8169/r8169.ko
make[1]: Leaving directory `/usr/src/linux-2.6.38-r8'
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
>From 192.168.0.19: icmp_seq=1 Destination Host Unreachable
>From 192.168.0.19: icmp_seq=2 Destination Host Unreachable
>From 192.168.0.19: icmp_seq=3 Destination Host Unreachable

--- 192.168.0.1 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 1999ms
pipe 3

Now, after 74 iterations, it looks as if the loop is stuck at the following:

HEAD is now at 1ce4b16 r8169: spinlock redux.
make -C /lib/modules/2.6.38-r8/build
M=/mnt/usb-disk/atom/usr/src/test-r8169/r8169 modules
make[1]: Entering directory `/usr/src/linux-2.6.38-r8'
CC [M] /mnt/usb-disk/atom/usr/src/test-r8169/r8169/r8169.o
Building modules, stage 2.
MODPOST 1 modules
CC /mnt/usb-disk/atom/usr/src/test-r8169/r8169/r8169.mod.o
LD [M] /mnt/usb-disk/atom/usr/src/test-r8169/r8169/r8169.ko
make[1]: Leaving directory `/usr/src/linux-2.6.38-r8'

Should I wait for it to end?
Do you want me to post the whole log so far?