public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] leds: lm3642: Use regmap_update_bits() in lm3642_chip_init()
@ 2012-09-22  6:40 Axel Lin
  2012-09-24  0:58 ` gshark
  0 siblings, 1 reply; 3+ messages in thread
From: Axel Lin @ 2012-09-22  6:40 UTC (permalink / raw)
  To: Bryan Wu; +Cc: G.Shark Jeong, Richard Purdie, linux-leds, linux-kernel

Use regmap_update_bits() to replace regmap_read() + regmap_write().
With this patch, we only show the error message when regmap_update_bits()
fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/leds/leds-lm3642.c |   15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index 924853b..3285006 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -95,23 +95,14 @@ struct lm3642_chip_data {
 /* chip initialize */
 static int __devinit lm3642_chip_init(struct lm3642_chip_data *chip)
 {
-	unsigned int reg_val;
 	int ret;
 	struct lm3642_platform_data *pdata = chip->pdata;
 
 	/* set enable register */
-	ret = regmap_read(chip->regmap, REG_ENABLE, &reg_val);
+	ret = regmap_update_bits(chip->regmap, REG_ENABLE, EX_PIN_ENABLE_MASK,
+				 pdata->tx_pin);
 	if (ret < 0)
-		goto out;
-
-	reg_val &= (~EX_PIN_ENABLE_MASK);
-	reg_val |= pdata->tx_pin;
-	ret = regmap_write(chip->regmap, REG_ENABLE, reg_val);
-	if (ret < 0)
-		goto out;
-
-out:
-	dev_err(chip->dev, "Failed to read REG_ENABLE Register\n");
+		dev_err(chip->dev, "Failed to update REG_ENABLE Register\n");
 	return ret;
 }
 
-- 
1.7.9.5




^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2012-09-24 11:11 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-22  6:40 [PATCH] leds: lm3642: Use regmap_update_bits() in lm3642_chip_init() Axel Lin
2012-09-24  0:58 ` gshark
2012-09-24 11:11   ` Bryan Wu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox