From: Wen Congyang <wency@cn.fujitsu.com>
To: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
lenb@kernel.org, srivatsa.bhat@linux.vnet.ibm.com,
toshi.kani@hp.com
Subject: Re: [PATCH v3 3/3] acpi : acpi_bus_trim() stops removing devices when failing to remove the device
Date: Tue, 09 Oct 2012 16:02:29 +0800 [thread overview]
Message-ID: <5073DA15.4040501@cn.fujitsu.com> (raw)
In-Reply-To: <4FFEB4F9.7000906@jp.fujitsu.com>
Hi, ishimatsu:
At 07/12/2012 07:28 PM, Yasuaki Ishimatsu Wrote:
> acpi_bus_trim() stops removing devices, when acpi_bus_remove() return error
> number. But acpi_bus_remove() cannot return error number correctly.
> acpi_bus_remove() only return -EINVAL, when dev argument is NULL. Thus even if
> device cannot be removed correctly, acpi_bus_trim() ignores and continues to
> remove devices. acpi_bus_hot_remove_device() uses acpi_bus_trim() for removing
> devices. Therefore acpi_bus_hot_remove_device() can send "_EJ0" to firmware,
> even if the device is running on the system. In this case, the system cannot
> work well. So acpi_bus_trim() should check whether device was removed or not
> correctly. The patch adds error check into some functions to remove the device.
What is the status about this patch?
Vasilis Liaskovitis found a similar bug about the memory hotplug, and this patch
can fix this problem:
https://lkml.org/lkml/2012/9/26/318
Thanks
Wen Congyang
>
> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
>
> ---
> drivers/acpi/scan.c | 15 ++++++++++++---
> drivers/base/dd.c | 22 +++++++++++++++++-----
> include/linux/device.h | 2 +-
> 3 files changed, 30 insertions(+), 9 deletions(-)
>
> Index: linux-3.5-rc6/drivers/acpi/scan.c
> ===================================================================
> --- linux-3.5-rc6.orig/drivers/acpi/scan.c 2012-07-12 20:11:37.316443808 +0900
> +++ linux-3.5-rc6/drivers/acpi/scan.c 2012-07-12 20:17:17.927185231 +0900
> @@ -425,12 +425,17 @@ static int acpi_device_remove(struct dev
> {
> struct acpi_device *acpi_dev = to_acpi_device(dev);
> struct acpi_driver *acpi_drv = acpi_dev->driver;
> + int ret;
>
> if (acpi_drv) {
> if (acpi_drv->ops.notify)
> acpi_device_remove_notify_handler(acpi_dev);
> - if (acpi_drv->ops.remove)
> - acpi_drv->ops.remove(acpi_dev, acpi_dev->removal_type);
> + if (acpi_drv->ops.remove) {
> + ret = acpi_drv->ops.remove(acpi_dev,
> + acpi_dev->removal_type);
> + if (ret)
> + return ret;
> + }
> }
> acpi_dev->driver = NULL;
> acpi_dev->driver_data = NULL;
> @@ -1208,11 +1213,15 @@ static int acpi_device_set_context(struc
>
> static int acpi_bus_remove(struct acpi_device *dev, int rmdevice)
> {
> + int ret;
> +
> if (!dev)
> return -EINVAL;
>
> dev->removal_type = ACPI_BUS_REMOVAL_EJECT;
> - device_release_driver(&dev->dev);
> + ret = device_release_driver(&dev->dev);
> + if (ret)
> + return ret;
>
> if (!rmdevice)
> return 0;
> Index: linux-3.5-rc6/drivers/base/dd.c
> ===================================================================
> --- linux-3.5-rc6.orig/drivers/base/dd.c 2012-07-12 20:11:37.316443808 +0900
> +++ linux-3.5-rc6/drivers/base/dd.c 2012-07-12 20:17:17.928185218 +0900
> @@ -464,9 +464,10 @@ EXPORT_SYMBOL_GPL(driver_attach);
> * __device_release_driver() must be called with @dev lock held.
> * When called for a USB interface, @dev->parent lock must be held as well.
> */
> -static void __device_release_driver(struct device *dev)
> +static int __device_release_driver(struct device *dev)
> {
> struct device_driver *drv;
> + int ret;
>
> drv = dev->driver;
> if (drv) {
> @@ -482,9 +483,11 @@ static void __device_release_driver(stru
> pm_runtime_put_sync(dev);
>
> if (dev->bus && dev->bus->remove)
> - dev->bus->remove(dev);
> + ret = dev->bus->remove(dev);
> else if (drv->remove)
> - drv->remove(dev);
> + ret = drv->remove(dev);
> + if (ret)
> + goto rollback;
> devres_release_all(dev);
> dev->driver = NULL;
> klist_remove(&dev->p->knode_driver);
> @@ -494,6 +497,12 @@ static void __device_release_driver(stru
> dev);
>
> }
> +
> + return ret;
> +
> +rollback:
> + driver_sysfs_add(dev);
> + return ret;
> }
>
> /**
> @@ -503,16 +512,19 @@ static void __device_release_driver(stru
> * Manually detach device from driver.
> * When called for a USB interface, @dev->parent lock must be held.
> */
> -void device_release_driver(struct device *dev)
> +int device_release_driver(struct device *dev)
> {
> + int ret;
> /*
> * If anyone calls device_release_driver() recursively from
> * within their ->remove callback for the same device, they
> * will deadlock right here.
> */
> device_lock(dev);
> - __device_release_driver(dev);
> + ret = __device_release_driver(dev);
> device_unlock(dev);
> +
> + return ret;
> }
> EXPORT_SYMBOL_GPL(device_release_driver);
>
> Index: linux-3.5-rc6/include/linux/device.h
> ===================================================================
> --- linux-3.5-rc6.orig/include/linux/device.h 2012-07-12 20:11:37.317443779 +0900
> +++ linux-3.5-rc6/include/linux/device.h 2012-07-12 20:17:17.936185118 +0900
> @@ -827,7 +827,7 @@ static inline void *dev_get_platdata(con
> * for information on use.
> */
> extern int __must_check device_bind_driver(struct device *dev);
> -extern void device_release_driver(struct device *dev);
> +extern int device_release_driver(struct device *dev);
> extern int __must_check device_attach(struct device *dev);
> extern int __must_check driver_attach(struct device_driver *drv);
> extern int __must_check device_reprobe(struct device *dev);
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2012-10-09 7:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-12 11:22 [PATCH v3 1/3] acpi : cpu hot-remove returns error when cpu_down() fails Yasuaki Ishimatsu
2012-07-12 11:27 ` [PATCH v3 2/3] acpi : prevent cpu from becoming online Yasuaki Ishimatsu
2012-07-12 11:40 ` [PATCH v3 2/3 RESEND] " Yasuaki Ishimatsu
2012-07-12 12:41 ` Srivatsa S. Bhat
2012-07-13 6:24 ` Yasuaki Ishimatsu
2012-07-12 16:49 ` Toshi Kani
2012-07-13 6:27 ` Yasuaki Ishimatsu
2012-07-12 11:28 ` [PATCH v3 3/3] acpi : acpi_bus_trim() stops removing devices when failing to remove the device Yasuaki Ishimatsu
2012-07-12 16:50 ` Toshi Kani
2012-07-13 7:16 ` Yasuaki Ishimatsu
2012-10-09 8:02 ` Wen Congyang [this message]
2012-10-09 8:24 ` Yasuaki Ishimatsu
2012-07-12 12:32 ` [PATCH v3 1/3] acpi : cpu hot-remove returns error when cpu_down() fails Srivatsa S. Bhat
2012-07-13 6:29 ` Yasuaki Ishimatsu
2012-07-12 16:48 ` Toshi Kani
2012-07-13 6:26 ` Yasuaki Ishimatsu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5073DA15.4040501@cn.fujitsu.com \
--to=wency@cn.fujitsu.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
--cc=toshi.kani@hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox