Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge

Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge

[Francesco Lavra]

On 10/25/2012 08:30 AM, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
> 
> - This patch adds device tree support for fuelgauge driver
> - optimize bm devices platform_data usage and of_probe(...)
>   Note: of_probe() routine for battery managed devices is made
>   common across all bm drivers.
> - test status:
>   - interrupt numbers assigned differs between legacy and FDT mode.
> 
> Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
[...]
> diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt b/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
> new file mode 100644
> index 0000000..28eaf35
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
> @@ -0,0 +1,58 @@
> +=== AB8500 Fuel Gauge Driver ===
> +
> +AB8500 is a mixed signal multimedia and power management
> +device comprising: power and energy-management-module,
> +wall-charger, usb-charger, audio codec, general purpose adc,
> +tvout, clock management and sim card interface.
> +
> +Fuelgauge support is part of energy-management-modules, other
> +components of this module are:
> +main-charger, usb-combo-charger and battery-temperature-monitoring.
> +
> +The properties below describes the node for fuelgauge driver.
> +
> +Required Properties:
> +- compatible = This shall be: "stericsson,ab8500-fg"
> +- battery = Shall be battery specific information
> +	Example:
> +	ab8500_fg {
> +		compatible = "stericsson,ab8500-fg";
> +		battery	   = <&ab8500_battery>;
> +	};
> +
> +dependent node:
> +	ab8500_battery: ab8500_battery {
> +	};
> +	This node will provide information on 'thermistor interface' and
> +	'battery technology type' used.
> +
> +Properties of this node are:
> +thermistor-on-batctrl:
> +	A boolean value indicating thermistor interface	to battery
> +
> +	Note:
> +	'btemp' and 'batctrl' are the pins interfaced for battery temperature
> +	measurement, 'btemp' signal is used when NTC(negative temperature
> +	coefficient) resister is interfaced external to battery whereas
> +	'batctrl' pin is used when NTC resister is internal to battery.
> +
> +	Example:
> +	ab8500_battery: ab8500_battery {
> +		thermistor-on-batctrl;
> +	};
> +	indiactes: NTC resister is internal to battery, 'batctrl' is used

s/indiactes/indicates

[...]
> +int __devinit
> +bmdevs_of_probe(struct device *dev,
> +		struct device_node *np,
> +		struct abx500_bm_data **battery)
> +{
> +	struct	abx500_battery_type *btype;
> +	struct  device_node *np_bat_supply;
> +	struct	abx500_bm_data *bat;
> +	const char *bat_tech;
> +	int i, thermistor;
> +
> +	*battery = &ab8500_bm_data;
> +
> +	/* get phandle to 'battery-info' node */
> +	np_bat_supply = of_parse_phandle(np, "battery", 0);
> +	if (!np_bat_supply) {
> +		dev_err(dev, "missing property battery\n");
> +		return -EINVAL;
> +	}
> +	if (of_property_read_bool(np_bat_supply,
> +			"thermistor-on-batctrl"))
> +		thermistor = NTC_INTERNAL;
> +	else
> +		thermistor = NTC_EXTERNAL;
> +
> +	bat = *battery;
> +	if (thermistor == NTC_EXTERNAL) {
> +		bat->n_btypes  = 4;
> +		bat->bat_type  = bat_type_ext_thermistor;
> +		bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
> +	}
> +	bat_tech = of_get_property(np_bat_supply,
> +			"stericsson,battery-type", NULL);
> +	if (!bat_tech)
> +		dev_warn(dev, "missing property battery-name/type\n");
> +
> +	if (strncmp(bat_tech, "LION", 4) == 0) {

What if bat_tech is NULL?

[...]
> diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
> index bf02225..e117920 100644
> --- a/drivers/power/ab8500_fg.c
> +++ b/drivers/power/ab8500_fg.c
> @@ -22,15 +22,16 @@
>  #include <linux/platform_device.h>
>  #include <linux/power_supply.h>
>  #include <linux/kobject.h>
> -#include <linux/mfd/abx500/ab8500.h>
> -#include <linux/mfd/abx500.h>
>  #include <linux/slab.h>
> -#include <linux/mfd/abx500/ab8500-bm.h>
>  #include <linux/delay.h>
> -#include <linux/mfd/abx500/ab8500-gpadc.h>
> -#include <linux/mfd/abx500.h>
>  #include <linux/time.h>
> +#include <linux/of.h>
>  #include <linux/completion.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/abx500.h>
> +#include <linux/mfd/abx500/ab8500.h>
> +#include <linux/mfd/abx500/ab8500-bm.h>
> +#include <linux/mfd/abx500/ab8500-gpadc.h>
>  
>  #define MILLI_TO_MICRO			1000
>  #define FG_LSB_IN_MA			1627
> @@ -212,7 +213,6 @@ struct ab8500_fg {
>  	struct ab8500_fg_avg_cap avg_cap;
>  	struct ab8500 *parent;
>  	struct ab8500_gpadc *gpadc;
> -	struct abx500_fg_platform_data *pdata;

pdata should be removed from the description of the struct members as well.

--
Francesco

Re: [PATCH 2/4] mfd: ab8500: add devicetree support for btemp

[Francesco Lavra]

On 10/25/2012 08:30 AM, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
> 
> This patch adds device tree support for
> battery-temperature-monitor driver
> 
> Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
> ---
>  Documentation/devicetree/bindings/mfd/ab8500.txt   |    6 ++
>  .../bindings/power_supply/ab8500/btemp.txt         |   16 +++++
>  arch/arm/boot/dts/dbx5x0.dtsi                      |    5 ++
>  drivers/mfd/ab8500-core.c                          |    5 ++
>  drivers/power/Kconfig                              |    6 --
>  drivers/power/ab8500_bmdata.c                      |    4 +-
>  drivers/power/ab8500_btemp.c                       |   66 ++++++++++++--------
>  7 files changed, 73 insertions(+), 35 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
> index 6ca8d81..179c802 100644
> --- a/Documentation/devicetree/bindings/mfd/ab8500.txt
> +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
> @@ -30,6 +30,12 @@ ab8500-fg                : 			: vddadc       : Fuel Gauge
>  			 : LOW_BAT_F		:	       : LOW threshold battery voltage
>  			 : CC_INT_CALIB		:	       : Coulomb Counter Internal Calibration
>  			 : CCEOC		:	       : Coulomb Counter End of Conversion
> +ab8500-btemp		 :			: vtvout       : Battery Temperature
> +			 : BAT_CTRL_INDB        :              : Battery Removal Indicator
> +			 : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
> +			 : BTEMP_HIGH           :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
> +			 : BTEMP_LOW_MEDIUM     :              : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
> +			 : BTEMP_MEDIUM_HIGH    :	       : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp”

BTEMP_HIGH, BTEMP_LOW_MEDIUM and BTEMP_MEDIUM_HIGH are in the wrong
order and don't correspond to their description.

--
Francesco

Re: [PATCH 3/4] mfd: ab8500: add devicetree support for charger

[Francesco Lavra]

On 10/25/2012 08:30 AM, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
> 
> This patch adds device tree support for ab8500-charger
> driver
> 
> Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
[...]
> diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
> index 78a730c..956943e 100644
> --- a/drivers/power/ab8500_charger.c
> +++ b/drivers/power/ab8500_charger.c
> @@ -23,6 +23,8 @@
>  #include <linux/err.h>
>  #include <linux/workqueue.h>
>  #include <linux/kobject.h>
> +#include <linux/of.h>
> +#include <linux/mfd/core.h>
>  #include <linux/mfd/abx500/ab8500.h>
>  #include <linux/mfd/abx500.h>
>  #include <linux/mfd/abx500/ab8500-bm.h>
> @@ -183,7 +185,6 @@ struct ab8500_charger_usb_state {
>   * @autopower		Indicate if we should have automatic pwron after pwrloss
>   * @parent:		Pointer to the struct ab8500
>   * @gpadc:		Pointer to the struct gpadc
> - * @pdata:		Pointer to the abx500_charger platform data
>   * @bat:		Pointer to the abx500_bm platform data
>   * @flags:		Structure for information about events triggered
>   * @usb_state:		Structure for usb stack information
> @@ -218,9 +219,9 @@ struct ab8500_charger {
>  	int vbat;
>  	int old_vbat;
>  	bool autopower;
> +	bool autopower_cfg;

autopower_cfg should be added in the description of the struct members
as well.

--
Francesco

Re: [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg

[Francesco Lavra]

On 10/25/2012 08:30 AM, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
> 
> This patch adds device tree support for charging algorithm
> driver
> 
> Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
[...]
> diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
> index 88b5cc1..829fcfd 100644
> --- a/drivers/power/abx500_chargalg.c
> +++ b/drivers/power/abx500_chargalg.c
> @@ -21,6 +21,8 @@
>  #include <linux/completion.h>
>  #include <linux/workqueue.h>
>  #include <linux/kobject.h>
> +#include <linux/of.h>
> +#include <linux/mfd/core.h>
>  #include <linux/mfd/abx500.h>
>  #include <linux/mfd/abx500/ux500_chargalg.h>
>  #include <linux/mfd/abx500/ab8500-bm.h>
> @@ -231,7 +233,6 @@ struct abx500_chargalg {
>  	struct abx500_chargalg_charger_info chg_info;
>  	struct abx500_chargalg_battery_data batt_data;
>  	struct abx500_chargalg_suspension_status susp_status;
> -	struct abx500_bmdevs_plat_data *pdata;

pdata should be removed from the description of the struct members as well.

>  	struct abx500_bm_data *bat;
>  	struct power_supply chargalg_psy;
>  	struct ux500_charger *ac_chg;
> @@ -1795,25 +1796,45 @@ static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
>  	flush_scheduled_work();
>  	power_supply_unregister(&di->chargalg_psy);
>  	platform_set_drvdata(pdev, NULL);
> -	kfree(di);
>  
>  	return 0;
>  }
>  
> +static char *supply_interface[] = {
> +	"ab8500_fg",
> +};
> +
>  static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
>  {
> -	struct abx500_bmdevs_plat_data *plat_data;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct abx500_chargalg *di;
>  	int ret = 0;
>  
> -	struct abx500_chargalg *di =
> -		kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL);
> -	if (!di)
> +	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
> +	if (!di) {
> +		dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
>  		return -ENOMEM;
> +	}
> +	di->bat = pdev->mfd_cell->platform_data;
> +	if (!di->bat) {
> +		if (np) {
> +			ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
> +			if (ret) {
> +				dev_err(&pdev->dev,
> +					"failed to get battery information\n");
> +				return ret;
> +			}
> +		} else {
> +			dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n");
> +			return -EINVAL;
> +		}
> +	} else {
> +		dev_info(&pdev->dev, "falling back to legacy platform data\n");
> +		printk("%s falling back to legacy platform data\n", __func__);

You forgot to remove the printk() call.

--
Francesco

Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge

[Rajanikanth HV]

On 27 October 2012 20:37, Francesco Lavra <francescolavra.fl@gmail.com> wrote:
> On 10/25/2012 08:30 AM, Rajanikanth H.V wrote:
>> From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
>> +     bat_tech = of_get_property(np_bat_supply,
>> +                     "stericsson,battery-type", NULL);
>> +     if (!bat_tech)
>> +             dev_warn(dev, "missing property battery-name/type\n");
>> +
>> +     if (strncmp(bat_tech, "LION", 4) == 0) {
>
> What if bat_tech is NULL?
It will be UNKNOWN

Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge

[Francesco Lavra]

On 10/27/2012 06:00 PM, Rajanikanth HV wrote:
> On 27 October 2012 20:37, Francesco Lavra <francescolavra.fl@gmail.com> wrote:
>> On 10/25/2012 08:30 AM, Rajanikanth H.V wrote:
>>> From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
>>> +     bat_tech = of_get_property(np_bat_supply,
>>> +                     "stericsson,battery-type", NULL);
>>> +     if (!bat_tech)
>>> +             dev_warn(dev, "missing property battery-name/type\n");
>>> +
>>> +     if (strncmp(bat_tech, "LION", 4) == 0) {
>>
>> What if bat_tech is NULL?
> It will be UNKNOWN

I wanted to draw your attention to the fact that if bat_tech is NULL you
are passing a NULL pointer to strncmp(), which is not good.
So you should assign a default value to bat_tech in case the battery
type property is not found in the DT, as below:

if (!bat_tech) {
	dev_warn(dev, "missing property battery-name/type\n");
	bat_tech = "UNKNOWN";
}

--
Francesco

[PATCH 4/4] mfd: ab8500: add devicetree support for chargalg

[Rajanikanth H.V]

From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>

This patch adds device tree support for charging algorithm
driver

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
---
 .../bindings/power_supply/ab8500/chargalg.txt      |   16 ++++++
 arch/arm/boot/dts/dbx5x0.dtsi                      |    5 ++
 drivers/mfd/ab8500-core.c                          |    5 ++
 drivers/power/abx500_chargalg.c                    |   54 ++++++++++++++------
 include/linux/mfd/abx500.h                         |    6 ---
 5 files changed, 64 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt

diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
new file mode 100644
index 0000000..ef53283
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
@@ -0,0 +1,16 @@
+=== AB8500 Charging Algorithm Driver ===
+
+The properties below describes the node for chargalg driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-chargalg"
+- battery = Shall be battery specific information
+
+Example:
+ab8500_chargalg {
+	compatible = "stericsson,ab8500-chargalg";
+	battery	   = <&ab8500_battery>;
+};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index b1ecb5d..a678afa 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -373,6 +373,11 @@
 					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
 				};
 
+				ab8500_chargalg {
+					compatible	= "stericsson,ab8500-chargalg";
+					battery		= <&ab8500_battery>;
+				};
+
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
 					interrupts = < 90 0x4
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index c7a120b..5ec70f2 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1071,8 +1071,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
 	},
 	{
 		.name = "ab8500-chargalg",
+		.of_compatible = "stericsson,ab8500-chargalg",
 		.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
 		.resources = ab8500_chargalg_resources,
+#ifndef CONFIG_OF
+		.platform_data = &ab8500_bm_data,
+		.pdata_size = sizeof(ab8500_bm_data),
+#endif
 	},
 };
 
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 88b5cc1..c603556 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -21,6 +21,8 @@
 #include <linux/completion.h>
 #include <linux/workqueue.h>
 #include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ux500_chargalg.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
@@ -205,7 +207,6 @@ enum maxim_ret {
  * @chg_info:		information about connected charger types
  * @batt_data:		data of the battery
  * @susp_status:	current charger suspension status
- * @pdata:		pointer to the abx500_chargalg platform data
  * @bat:		pointer to the abx500_bm platform data
  * @chargalg_psy:	structure that holds the battery properties exposed by
  *			the charging algorithm
@@ -231,7 +232,6 @@ struct abx500_chargalg {
 	struct abx500_chargalg_charger_info chg_info;
 	struct abx500_chargalg_battery_data batt_data;
 	struct abx500_chargalg_suspension_status susp_status;
-	struct abx500_bmdevs_plat_data *pdata;
 	struct abx500_bm_data *bat;
 	struct power_supply chargalg_psy;
 	struct ux500_charger *ac_chg;
@@ -1795,25 +1795,44 @@ static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
 	flush_scheduled_work();
 	power_supply_unregister(&di->chargalg_psy);
 	platform_set_drvdata(pdev, NULL);
-	kfree(di);
 
 	return 0;
 }
 
+static char *supply_interface[] = {
+	"ab8500_fg",
+};
+
 static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
 {
-	struct abx500_bmdevs_plat_data *plat_data;
+	struct device_node *np = pdev->dev.of_node;
+	struct abx500_chargalg *di;
 	int ret = 0;
 
-	struct abx500_chargalg *di =
-		kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL);
-	if (!di)
+	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+	if (!di) {
+		dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
 		return -ENOMEM;
+	}
+	di->bat = pdev->mfd_cell->platform_data;
+	if (!di->bat) {
+		if (np) {
+			ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+			if (ret) {
+				dev_err(&pdev->dev,
+					"failed to get battery information\n");
+				return ret;
+			}
+		} else {
+			dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n");
+			return -EINVAL;
+		}
+	} else {
+		dev_info(&pdev->dev, "falling back to legacy platform data\n");
+	}
 
 	/* get device struct */
 	di->dev = &pdev->dev;
-	plat_data = pdev->dev.platform_data;
-	di->pdata = plat_data;
 
 	/* chargalg supply */
 	di->chargalg_psy.name = "abx500_chargalg";
@@ -1821,8 +1840,8 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
 	di->chargalg_psy.properties = abx500_chargalg_props;
 	di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props);
 	di->chargalg_psy.get_property = abx500_chargalg_get_property;
-	di->chargalg_psy.supplied_to = di->pdata->supplied_to;
-	di->chargalg_psy.num_supplicants = di->pdata->num_supplicants;
+	di->chargalg_psy.supplied_to = supply_interface;
+	di->chargalg_psy.num_supplicants = ARRAY_SIZE(supply_interface),
 	di->chargalg_psy.external_power_changed =
 		abx500_chargalg_external_power_changed;
 
@@ -1842,7 +1861,7 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
 		create_singlethread_workqueue("abx500_chargalg_wq");
 	if (di->chargalg_wq == NULL) {
 		dev_err(di->dev, "failed to create work queue\n");
-		goto free_device_info;
+		return -ENOMEM;
 	}
 
 	/* Init work for chargalg */
@@ -1883,20 +1902,23 @@ free_psy:
 	power_supply_unregister(&di->chargalg_psy);
 free_chargalg_wq:
 	destroy_workqueue(di->chargalg_wq);
-free_device_info:
-	kfree(di);
-
 	return ret;
 }
 
+static const struct of_device_id ab8500_chargalg_match[] = {
+	{ .compatible = "stericsson,ab8500-chargalg", },
+	{ },
+};
+
 static struct platform_driver abx500_chargalg_driver = {
 	.probe = abx500_chargalg_probe,
 	.remove = __devexit_p(abx500_chargalg_remove),
 	.suspend = abx500_chargalg_suspend,
 	.resume = abx500_chargalg_resume,
 	.driver = {
-		.name = "abx500-chargalg",
+		.name = "ab8500-chargalg",
 		.owner = THIS_MODULE,
+		.of_match_table = ab8500_chargalg_match,
 	},
 };
 
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index bbf3ad6..a14c1a6 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -389,12 +389,6 @@ struct abx500_bm_data {
 
 extern struct abx500_bm_data ab8500_bm_data;
 
-struct abx500_bmdevs_plat_data {
-	char	**supplied_to;
-	size_t	num_supplicants;
-	bool	autopower_cfg;
-};
-
 enum {
 	NTC_EXTERNAL = 0,
 	NTC_INTERNAL,
-- 
1.7.10.4

[PATCH 4/4] mfd: ab8500: add devicetree support for chargalg

[Rajanikanth H.V]

From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>

This patch adds device tree support for charging algorithm
driver

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@linaro.org>
---
 .../bindings/power_supply/ab8500/chargalg.txt      |   16 ++++++
 arch/arm/boot/dts/dbx5x0.dtsi                      |    5 ++
 drivers/mfd/ab8500-core.c                          |    5 ++
 drivers/power/abx500_chargalg.c                    |   56 ++++++++++++++------
 include/linux/mfd/abx500.h                         |    6 ---
 5 files changed, 66 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt

diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
new file mode 100644
index 0000000..ef53283
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
@@ -0,0 +1,16 @@
+=== AB8500 Charging Algorithm Driver ===
+
+The properties below describes the node for chargalg driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-chargalg"
+- battery = Shall be battery specific information
+
+Example:
+ab8500_chargalg {
+	compatible = "stericsson,ab8500-chargalg";
+	battery	   = <&ab8500_battery>;
+};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 7e9c01a..f1661b3 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -357,6 +357,11 @@
 					thermistor-on-batctrl;
 				};
 
+				ab8500-chargalg {
+					compatible	= "stericsson,ab8500-chargalg";
+					battery		= <&ab8500_battery>;
+				};
+
 				ab8500-charger {
 					compatible	= "stericsson,ab8500-charger";
 					battery		= <&ab8500_battery>;
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index c7a120b..5ec70f2 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1071,8 +1071,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
 	},
 	{
 		.name = "ab8500-chargalg",
+		.of_compatible = "stericsson,ab8500-chargalg",
 		.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
 		.resources = ab8500_chargalg_resources,
+#ifndef CONFIG_OF
+		.platform_data = &ab8500_bm_data,
+		.pdata_size = sizeof(ab8500_bm_data),
+#endif
 	},
 };
 
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 94bf69b..96eb2c5 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -21,6 +21,8 @@
 #include <linux/completion.h>
 #include <linux/workqueue.h>
 #include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ux500_chargalg.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
@@ -205,7 +207,6 @@ enum maxim_ret {
  * @chg_info:		information about connected charger types
  * @batt_data:		data of the battery
  * @susp_status:	current charger suspension status
- * @pdata:		pointer to the abx500_chargalg platform data
  * @bat:		pointer to the abx500_bm platform data
  * @chargalg_psy:	structure that holds the battery properties exposed by
  *			the charging algorithm
@@ -231,7 +232,6 @@ struct abx500_chargalg {
 	struct abx500_chargalg_charger_info chg_info;
 	struct abx500_chargalg_battery_data batt_data;
 	struct abx500_chargalg_suspension_status susp_status;
-	struct abx500_bmdevs_plat_data *pdata;
 	struct abx500_bm_data *bat;
 	struct power_supply chargalg_psy;
 	struct ux500_charger *ac_chg;
@@ -1795,35 +1795,55 @@ static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
 	flush_scheduled_work();
 	power_supply_unregister(&di->chargalg_psy);
 	platform_set_drvdata(pdev, NULL);
-	kfree(di);
 
 	return 0;
 }
 
+static char *supply_interface[] = {
+	"ab8500_fg",
+};
+
 static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
 {
-	struct abx500_bmdevs_plat_data *plat_data;
+	struct device_node *np = pdev->dev.of_node;
+	struct abx500_chargalg *di;
 	int ret = 0;
 
-	struct abx500_chargalg *di =
-		kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL);
-	if (!di)
+	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+	if (!di) {
+		dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n",
+			__func__);
 		return -ENOMEM;
+	}
+
+	di->bat = pdev->mfd_cell->platform_data;
+	if (!di->bat) {
+		if (np) {
+			ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+			if (ret) {
+				dev_err(&pdev->dev,
+					"failed to get battery information\n");
+				return ret;
+			}
+		} else {
+			dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n");
+			return -EINVAL;
+		}
+	} else {
+		dev_info(&pdev->dev, "falling back to legacy platform data\n");
+	}
 
 	/* get device struct */
 	di->dev = &pdev->dev;
 
-	plat_data = pdev->dev.platform_data;
-	di->pdata = plat_data;
-
 	/* chargalg supply */
 	di->chargalg_psy.name = "abx500_chargalg";
 	di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY;
 	di->chargalg_psy.properties = abx500_chargalg_props;
 	di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props);
 	di->chargalg_psy.get_property = abx500_chargalg_get_property;
-	di->chargalg_psy.supplied_to = di->pdata->supplied_to;
-	di->chargalg_psy.num_supplicants = di->pdata->num_supplicants;
+	di->chargalg_psy.supplied_to = supply_interface;
+	di->chargalg_psy.num_supplicants = ARRAY_SIZE(supply_interface),
 	di->chargalg_psy.external_power_changed =
 		abx500_chargalg_external_power_changed;
 
@@ -1843,7 +1863,7 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
 		create_singlethread_workqueue("abx500_chargalg_wq");
 	if (di->chargalg_wq == NULL) {
 		dev_err(di->dev, "failed to create work queue\n");
-		goto free_device_info;
+		return -ENOMEM;
 	}
 
 	/* Init work for chargalg */
@@ -1884,20 +1904,24 @@ free_psy:
 	power_supply_unregister(&di->chargalg_psy);
 free_chargalg_wq:
 	destroy_workqueue(di->chargalg_wq);
-free_device_info:
-	kfree(di);
 
 	return ret;
 }
 
+static const struct of_device_id ab8500_chargalg_match[] = {
+	{ .compatible = "stericsson,ab8500-chargalg", },
+	{ },
+};
+
 static struct platform_driver abx500_chargalg_driver = {
 	.probe = abx500_chargalg_probe,
 	.remove = __devexit_p(abx500_chargalg_remove),
 	.suspend = abx500_chargalg_suspend,
 	.resume = abx500_chargalg_resume,
 	.driver = {
-		.name = "abx500-chargalg",
+		.name = "ab8500-chargalg",
 		.owner = THIS_MODULE,
+		.of_match_table = ab8500_chargalg_match,
 	},
 };
 
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 33f2c58..2138bd3 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -274,12 +274,6 @@ struct abx500_bm_data {
 
 extern struct abx500_bm_data ab8500_bm_data;
 
-struct abx500_bmdevs_plat_data {
-	char	**supplied_to;
-	size_t	num_supplicants;
-	bool	autopower_cfg;
-};
-
 enum {
 	NTC_EXTERNAL = 0,
 	NTC_INTERNAL,
-- 
1.7.10.4