Re: 3.7-rc3 oops on reboot

[Roland Stigge <stigge@antcom.de>]

On 10/29/2012 02:51 PM, Alexandre Pereira da Silva wrote:
>> I just tried both on a PHY3250 reference machine, and on a custom board
>> and couldn't reproduce sth. like this. Booted the kernel and connected
>> the ethernet cable later on, as well as with cable connected on boot.
> 
> This is happening on my custom board. I didn't try this on the
> reference board yet.
> 
>> Any related patches applied? Can you reproduce this on a reference
>> machine? Can you provide a .config for this? Any more detail about how
>> this could be reproduced?
> 
> No patches applied. I'm trying to bisect this. This happens on a clean
> -rc1 as well. Doesn't happen on v3.6.
> 
> Attached my .config
> 
> To reproduce this, I am just running "reboot". I have the ethernet
> cable always connected here.

Just tried this with your .config on the PHY3250 (w/o your initrd
thought) but couldn't reproduce the issue.

Maybe it's related to your Micrel ethernet PHY (activated in your
config) which I don't have hardware for?

Otherwise, we would need to have a look at your devicetree.

Roland