public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Daniel Wagner <wagi@monom.org>
To: Tejun Heo <tj@kernel.org>
Cc: serge.hallyn@canonical.com, ebiederm@xmission.com,
	nhorman@tuxdriver.com, tgraf@suug.ch, davem@davemloft.net,
	lizefan@huawei.com, cgroups@vger.kernel.org,
	containers@lists.linux-foundation.org,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH 7/7] netprio_cgroup: allow nesting and inherit config on cgroup creation
Date: Tue, 20 Nov 2012 09:57:14 +0100	[thread overview]
Message-ID: <50AB45EA.2050507@monom.org> (raw)
In-Reply-To: <1353400211-5182-8-git-send-email-tj@kernel.org>

Hi Tejun,

On 20.11.2012 09:30, Tejun Heo wrote:
> Inherit netprio configuration from ->css_online(), allow nesting and
> remove .broken_hierarchy marking.  This makes netprio_cgroup's
> behavior match netcls_cgroup's.
>
> Note that this patch changes userland-visible behavior.  Nesting is
> allowed and the first level cgroups below the root cgroup behave
> differently - they inherit priorities from the root cgroup on creation
> instead of starting with 0.  This is unfortunate but not doing so is
> much crazier.
>
> Signed-off-by: Tejun Heo <tj@kernel.org>

Tested and Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>

> ---
>   Documentation/cgroups/net_prio.txt |  2 ++
>   net/core/netprio_cgroup.c          | 42 ++++++++++++++++++++++----------------
>   2 files changed, 26 insertions(+), 18 deletions(-)
>
> diff --git a/Documentation/cgroups/net_prio.txt b/Documentation/cgroups/net_prio.txt
> index 01b3226..a82cbd2 100644
> --- a/Documentation/cgroups/net_prio.txt
> +++ b/Documentation/cgroups/net_prio.txt
> @@ -51,3 +51,5 @@ One usage for the net_prio cgroup is with mqprio qdisc allowing application
>   traffic to be steered to hardware/driver based traffic classes. These mappings
>   can then be managed by administrators or other networking protocols such as
>   DCBX.
> +
> +A new net_prio cgroup inherits the parent's configuration.
> diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c
> index b2af0d0..bde53da 100644
> --- a/net/core/netprio_cgroup.c
> +++ b/net/core/netprio_cgroup.c
> @@ -136,9 +136,6 @@ static struct cgroup_subsys_state *cgrp_css_alloc(struct cgroup *cgrp)
>   {
>   	struct cgroup_netprio_state *cs;
>
> -	if (cgrp->parent && cgrp->parent->id)
> -		return ERR_PTR(-EINVAL);
> -
>   	cs = kzalloc(sizeof(*cs), GFP_KERNEL);
>   	if (!cs)
>   		return ERR_PTR(-ENOMEM);
> @@ -146,16 +143,34 @@ static struct cgroup_subsys_state *cgrp_css_alloc(struct cgroup *cgrp)
>   	return &cs->css;
>   }
>
> -static void cgrp_css_free(struct cgroup *cgrp)
> +static int cgrp_css_online(struct cgroup *cgrp)
>   {
> -	struct cgroup_netprio_state *cs = cgrp_netprio_state(cgrp);
> +	struct cgroup *parent = cgrp->parent;
>   	struct net_device *dev;
> +	int ret = 0;
> +
> +	if (!parent)
> +		return 0;

BTW, parent is always != NULL, because the root cgroup will be attached 
to the dummytop cgroup.

This is the reason why there are this check in netprio_prio()

static u32 netprio_prio(struct cgroup *cgrp, struct net_device *dev)
{
	struct netprio_map *map = rcu_dereference_rtnl(dev->priomap);

	if (map && cgrp->id < map->priomap_len)
		return map->priomap[cgrp->id];

is necessary.

cheer,
daniel

  reply	other threads:[~2012-11-20  8:57 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-20  8:30 [PATCHSET REPOST v2 cgroup/for-3.8] netcls/prio_cgroup: update hierarchy support Tejun Heo
2012-11-20  8:30 ` [PATCH 1/7] netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking Tejun Heo
2012-11-20  8:35   ` Daniel Wagner
2012-11-20  8:30 ` [PATCH 2/7] netprio_cgroup: simplify write_priomap() Tejun Heo
2012-11-20  8:37   ` Daniel Wagner
2012-11-20  8:30 ` [PATCH 3/7] netprio_cgroup: shorten variable names in extend_netdev_table() Tejun Heo
2012-11-20  8:37   ` Daniel Wagner
2012-11-20  8:30 ` [PATCH 4/7] netprio_cgroup: reimplement priomap expansion Tejun Heo
2012-11-20  8:46   ` Daniel Wagner
2012-11-20 14:38     ` Tejun Heo
2012-11-20 15:09       ` Daniel Wagner
2012-11-20 15:13         ` Tejun Heo
2012-11-20 15:16           ` Daniel Wagner
2012-11-20  8:30 ` [PATCH 5/7] netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx Tejun Heo
2012-11-20  8:47   ` Daniel Wagner
2012-11-20  8:30 ` [PATCH 6/7] netprio_cgroup: implement netprio[_set]_prio() helpers Tejun Heo
2012-11-20  8:52   ` Daniel Wagner
2012-11-20  8:30 ` [PATCH 7/7] netprio_cgroup: allow nesting and inherit config on cgroup creation Tejun Heo
2012-11-20  8:57   ` Daniel Wagner [this message]
2012-11-20 14:40     ` Tejun Heo
2012-11-20 15:10       ` Daniel Wagner
2012-11-20 18:37 ` [PATCHSET REPOST v2 cgroup/for-3.8] netcls/prio_cgroup: update hierarchy support David Miller
2012-11-22 15:33 ` Tejun Heo
  -- strict thread matches above, loose matches on Subject: below --
2012-11-20  7:06 [PATCHSET " Tejun Heo
2012-11-20  7:06 ` [PATCH 7/7] netprio_cgroup: allow nesting and inherit config on cgroup creation Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50AB45EA.2050507@monom.org \
    --to=wagi@monom.org \
    --cc=cgroups@vger.kernel.org \
    --cc=containers@lists.linux-foundation.org \
    --cc=davem@davemloft.net \
    --cc=ebiederm@xmission.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lizefan@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@tuxdriver.com \
    --cc=serge.hallyn@canonical.com \
    --cc=tgraf@suug.ch \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox