From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: Federico Vaga <federico.vaga@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>,
Pawel Osciak <pawel@osciak.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Hans Verkuil <hans.verkuil@cisco.com>,
Giancarlo Asnaghi <giancarlo.asnaghi@st.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Jonathan Corbet <corbet@lwn.net>
Subject: Re: [PATCH v3 3/4] sta2x11_vip: convert to videobuf2 and control framework
Date: Tue, 04 Dec 2012 14:15:15 -0200 [thread overview]
Message-ID: <50BE2193.4020103@redhat.com> (raw)
In-Reply-To: <1348484332-8106-3-git-send-email-federico.vaga@gmail.com>
Em 24-09-2012 07:58, Federico Vaga escreveu:
> This patch re-write the driver and use the videobuf2
> interface instead of the old videobuf. Moreover, it uses also
> the control framework which allows the driver to inherit
> controls from its subdevice (ADV7180)
>
> Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
> ---
> drivers/media/pci/sta2x11/Kconfig | 2 +-
> drivers/media/pci/sta2x11/sta2x11_vip.c | 1238 ++++++++++---------------------
> 2 file modificati, 407 inserzioni(+), 833 rimozioni(-)
>
> diff --git a/drivers/media/pci/sta2x11/Kconfig b/drivers/media/pci/sta2x11/Kconfig
> index 6749f67..654339f 100644
> --- a/drivers/media/pci/sta2x11/Kconfig
> +++ b/drivers/media/pci/sta2x11/Kconfig
> @@ -2,7 +2,7 @@ config STA2X11_VIP
> tristate "STA2X11 VIP Video For Linux"
> depends on STA2X11
> select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT
> - select VIDEOBUF_DMA_CONTIG
> + select VIDEOBUF2_DMA_STREAMING
> depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS
> help
> Say Y for support for STA2X11 VIP (Video Input Port) capture
> diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c
> index 4c10205..b9ff926 100644
> --- a/drivers/media/pci/sta2x11/sta2x11_vip.c
> +++ b/drivers/media/pci/sta2x11/sta2x11_vip.c
> @@ -1,6 +1,7 @@
> /*
> * This is the driver for the STA2x11 Video Input Port.
> *
> + * Copyright (C) 2012 ST Microelectronics
> * Copyright (C) 2010 WindRiver Systems, Inc.
> *
> * This program is free software; you can redistribute it and/or modify it
> @@ -19,36 +20,30 @@
> * The full GNU General Public License is included in this distribution in
> * the file called "COPYING".
> *
> - * Author: Andreas Kies <andreas.kies@windriver.com>
> - * Vlad Lungu <vlad.lungu@windriver.com>
Why are you dropping those authorship data?
Ok, it is clear to me that most of the code there got rewritten, and,
while IANAL, I think they still have some copyrights on it.
So, if you're willing to do that, you need to get authors ack
on such patch.
...
>
> MODULE_DESCRIPTION("STA2X11 Video Input Port driver");
> -MODULE_AUTHOR("Wind River");
Same note applies here: we need Wind River's ack on that to drop it.
> +MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>");
> MODULE_LICENSE("GPL v2");
> MODULE_SUPPORTED_DEVICE("sta2x11 video input");
> MODULE_VERSION(DRV_VERSION);
>
next prev parent reply other threads:[~2012-12-04 16:15 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-24 10:58 [PATCH v3 1/4] v4l: vb2: add prepare/finish callbacks to allocators Federico Vaga
2012-09-24 10:58 ` [PATCH v3 2/4] videobuf2-dma-streaming: new videobuf2 memory allocator Federico Vaga
2012-09-24 12:44 ` Marek Szyprowski
2012-12-04 16:04 ` Mauro Carvalho Chehab
2012-12-05 12:50 ` Federico Vaga
2012-12-05 14:25 ` Mauro Carvalho Chehab
2012-12-11 13:54 ` Federico Vaga
2012-12-18 14:41 ` Marek Szyprowski
2012-12-20 15:37 ` Federico Vaga
2013-01-01 12:52 ` Mauro Carvalho Chehab
2013-01-03 16:13 ` Federico Vaga
2013-01-04 13:30 ` Federico Vaga
2013-01-06 17:04 ` Federico Vaga
2013-01-06 23:09 ` Alessandro Rubini
2013-01-07 19:40 ` Jonathan Corbet
2013-01-07 20:15 ` Mauro Carvalho Chehab
2013-01-08 6:50 ` Marek Szyprowski
2013-01-08 14:31 ` Jonathan Corbet
2013-01-09 7:48 ` Michael Olbrich
2012-09-24 10:58 ` [PATCH v3 3/4] sta2x11_vip: convert to videobuf2 and control framework Federico Vaga
2012-12-04 16:15 ` Mauro Carvalho Chehab [this message]
2012-12-05 1:12 ` Federico Vaga
2012-12-05 11:34 ` Mauro Carvalho Chehab
2012-12-05 12:24 ` Federico Vaga
2012-12-05 13:10 ` Mauro Carvalho Chehab
2012-12-05 13:27 ` Federico Vaga
2012-12-05 13:37 ` Mauro Carvalho Chehab
2012-12-05 13:45 ` Federico Vaga
2012-12-06 18:59 ` Federico Vaga
2012-09-24 10:58 ` [PATCH v3 4/4] adv7180: remove {query/g_/s_}ctrl Federico Vaga
2012-09-24 12:46 ` [PATCH v3 1/4] v4l: vb2: add prepare/finish callbacks to allocators Marek Szyprowski
2012-09-25 15:04 ` Federico Vaga
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50BE2193.4020103@redhat.com \
--to=mchehab@redhat.com \
--cc=corbet@lwn.net \
--cc=federico.vaga@gmail.com \
--cc=giancarlo.asnaghi@st.com \
--cc=hans.verkuil@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@infradead.org \
--cc=pawel@osciak.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).