* [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping
@ 2012-12-09 0:05 Axel Lin
2012-12-09 0:07 ` [PATCH RFT 2/2] regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap Axel Lin
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Axel Lin @ 2012-12-09 0:05 UTC (permalink / raw)
To: Mark Brown
Cc: Nancy Chen, Ying-Chun Liu (PaulLiu), Liam Girdwood, linux-kernel
By setting linear_min_sel to anatop_reg->min_bit_val, we can avoid
adjust the anatop_reg->min_bit_val offset in [set|get]_voltage_sel.
With this chance we can refactor this driver to use
regulator_[get|set]_voltage_sel_regmap.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/anatop-regulator.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 1aa5246..645a42d 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -48,18 +48,16 @@ static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg,
unsigned selector)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
- u32 val, mask;
+ u32 mask;
if (!anatop_reg->control_reg)
return -ENOTSUPP;
- val = anatop_reg->min_bit_val + selector;
- dev_dbg(®->dev, "%s: calculated val %d\n", __func__, val);
mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
anatop_reg->vol_bit_shift;
- val <<= anatop_reg->vol_bit_shift;
+ selector <<= anatop_reg->vol_bit_shift;
regmap_update_bits(anatop_reg->anatop, anatop_reg->control_reg,
- mask, val);
+ mask, selector);
return 0;
}
@@ -77,7 +75,7 @@ static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
anatop_reg->vol_bit_shift;
val = (val & mask) >> anatop_reg->vol_bit_shift;
- return val - anatop_reg->min_bit_val;
+ return val;
}
static struct regulator_ops anatop_rops = {
@@ -158,10 +156,11 @@ static int anatop_regulator_probe(struct platform_device *pdev)
goto anatop_probe_end;
}
- rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
- / 25000 + 1;
+ rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1
+ + sreg->min_bit_val;
rdesc->min_uV = sreg->min_voltage;
rdesc->uV_step = 25000;
+ rdesc->linear_min_sel = sreg->min_bit_val;
config.dev = &pdev->dev;
config.init_data = initdata;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH RFT 2/2] regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap
2012-12-09 0:05 [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping Axel Lin
@ 2012-12-09 0:07 ` Axel Lin
2012-12-09 5:38 ` Ying-Chun Liu (PaulLiu)
2012-12-09 5:37 ` [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping Ying-Chun Liu (PaulLiu)
2012-12-10 3:12 ` Mark Brown
2 siblings, 1 reply; 5+ messages in thread
From: Axel Lin @ 2012-12-09 0:07 UTC (permalink / raw)
To: Mark Brown
Cc: Nancy Chen, Ying-Chun Liu (PaulLiu), Liam Girdwood, linux-kernel
Call regulator_[get|set]_voltage_sel_regmap instead of open code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/anatop-regulator.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 645a42d..0199eee 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -48,34 +48,21 @@ static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg,
unsigned selector)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
- u32 mask;
if (!anatop_reg->control_reg)
return -ENOTSUPP;
- mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
- anatop_reg->vol_bit_shift;
- selector <<= anatop_reg->vol_bit_shift;
- regmap_update_bits(anatop_reg->anatop, anatop_reg->control_reg,
- mask, selector);
-
- return 0;
+ return regulator_set_voltage_sel_regmap(reg, selector);
}
static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
- u32 val, mask;
if (!anatop_reg->control_reg)
return -ENOTSUPP;
- regmap_read(anatop_reg->anatop, anatop_reg->control_reg, &val);
- mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
- anatop_reg->vol_bit_shift;
- val = (val & mask) >> anatop_reg->vol_bit_shift;
-
- return val;
+ return regulator_get_voltage_sel_regmap(reg);
}
static struct regulator_ops anatop_rops = {
@@ -161,11 +148,15 @@ static int anatop_regulator_probe(struct platform_device *pdev)
rdesc->min_uV = sreg->min_voltage;
rdesc->uV_step = 25000;
rdesc->linear_min_sel = sreg->min_bit_val;
+ rdesc->vsel_reg = sreg->control_reg;
+ rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
+ sreg->vol_bit_shift;
config.dev = &pdev->dev;
config.init_data = initdata;
config.driver_data = sreg;
config.of_node = pdev->dev.of_node;
+ config.regmap = sreg->anatop;
/* register regulator */
rdev = regulator_register(rdesc, &config);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping
2012-12-09 0:05 [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping Axel Lin
2012-12-09 0:07 ` [PATCH RFT 2/2] regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap Axel Lin
@ 2012-12-09 5:37 ` Ying-Chun Liu (PaulLiu)
2012-12-10 3:12 ` Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Ying-Chun Liu (PaulLiu) @ 2012-12-09 5:37 UTC (permalink / raw)
To: Axel Lin; +Cc: Mark Brown, Nancy Chen, Liam Girdwood, linux-kernel
於 2012年12月09日 08:05, Axel Lin 提到:
> By setting linear_min_sel to anatop_reg->min_bit_val, we can avoid
> adjust the anatop_reg->min_bit_val offset in [set|get]_voltage_sel.
>
> With this chance we can refactor this driver to use
> regulator_[get|set]_voltage_sel_regmap.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Ying-Chun Liu <paulliu@debian.org>
Looks good to me and I just test the path and it works.
--
PaulLiu (劉穎駿)
E-mail: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH RFT 2/2] regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap
2012-12-09 0:07 ` [PATCH RFT 2/2] regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap Axel Lin
@ 2012-12-09 5:38 ` Ying-Chun Liu (PaulLiu)
0 siblings, 0 replies; 5+ messages in thread
From: Ying-Chun Liu (PaulLiu) @ 2012-12-09 5:38 UTC (permalink / raw)
To: Axel Lin; +Cc: Mark Brown, Nancy Chen, Liam Girdwood, linux-kernel
於 2012年12月09日 08:07, Axel Lin 提到:
> Call regulator_[get|set]_voltage_sel_regmap instead of open code.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Ying-Chun Liu <paulliu@debian.org>
Looks good to me and I just test the path and it works.
--
PaulLiu (劉穎駿)
E-mail: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping
2012-12-09 0:05 [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping Axel Lin
2012-12-09 0:07 ` [PATCH RFT 2/2] regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap Axel Lin
2012-12-09 5:37 ` [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping Ying-Chun Liu (PaulLiu)
@ 2012-12-10 3:12 ` Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2012-12-10 3:12 UTC (permalink / raw)
To: Axel Lin; +Cc: Nancy Chen, Ying-Chun Liu (PaulLiu), Liam Girdwood, linux-kernel
On Sun, Dec 09, 2012 at 08:05:45AM +0800, Axel Lin wrote:
> By setting linear_min_sel to anatop_reg->min_bit_val, we can avoid
> adjust the anatop_reg->min_bit_val offset in [set|get]_voltage_sel.
Applied both, thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-12-10 3:12 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-09 0:05 [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping Axel Lin
2012-12-09 0:07 ` [PATCH RFT 2/2] regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap Axel Lin
2012-12-09 5:38 ` Ying-Chun Liu (PaulLiu)
2012-12-09 5:37 ` [PATCH RFT 1/2] regulator: anatop: Use linear_min_sel with linear mapping Ying-Chun Liu (PaulLiu)
2012-12-10 3:12 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).