Re: [PATCH v4 23/23] mfd: omap-usb-host: Don't spam console on clk_set_parent failure

[Rajendra Nayak <rnayak@ti.com>]

On Monday 10 December 2012 03:50 PM, Roger Quadros wrote:
> clk_set_parent is expected to fail on OMAP3 platforms. We don't
> consider that as fatal so don't spam console.

And what if it fails on a non-OMAP3 platform?

>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>   drivers/mfd/omap-usb-host.c |   18 +++++++++---------
>   1 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 0bb54393..344ce09 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -657,32 +657,32 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>   	}
>
>   	if (is_ehci_phy_mode(pdata->port_mode[0])) {
> -		/* for OMAP3 , the clk set paretn fails */
> +		/* for OMAP3, clk_set_parent fails */
>   		ret = clk_set_parent(omap->utmi_clk[0],
>   					omap->xclk60mhsp1_ck);
>   		if (ret != 0)
> -			dev_err(dev, "xclk60mhsp1_ck set parent"
> -				"failed error:%d\n", ret);
> +			dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
> +					ret);
>   	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
>   		ret = clk_set_parent(omap->utmi_clk[0],
>   					omap->init_60m_fclk);
>   		if (ret != 0)
> -			dev_err(dev, "init_60m_fclk set parent"
> -				"failed error:%d\n", ret);
> +			dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
> +					ret);
>   	}
>
>   	if (is_ehci_phy_mode(pdata->port_mode[1])) {
>   		ret = clk_set_parent(omap->utmi_clk[1],
>   					omap->xclk60mhsp2_ck);
>   		if (ret != 0)
> -			dev_err(dev, "xclk60mhsp2_ck set parent"
> -					"failed error:%d\n", ret);
> +			dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
> +					ret);
>   	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
>   		ret = clk_set_parent(omap->utmi_clk[1],
>   						omap->init_60m_fclk);
>   		if (ret != 0)
> -			dev_err(dev, "init_60m_fclk set parent"
> -				"failed error:%d\n", ret);
> +			dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
> +					ret);
>   	}
>
>   	omap_usbhs_init(dev);
>