* One last tweak for perfection.
@ 2013-01-16 13:59 Ove Karlsen
2013-01-16 14:02 ` Ove Karlsen
0 siblings, 1 reply; 6+ messages in thread
From: Ove Karlsen @ 2013-01-16 13:59 UTC (permalink / raw)
To: LKML
What kernelthreads _needs_ to run? So I can put them on max pri renice,
along with reniced X and app. And everything else on idle priority. So
to make the app run at max efficiency, and not be starved by
kernelthreads waiting. (Or any other consideration, for giving maximal
cpu to app. Even small tweaks.)
To read my research so far, (and I have done much, about 2 years of
tweakin´ on and off.) Please see
http://paradoxuncreated.com/Blog/wordpress/?p=2268
Main points, no highres timer, 90hz timer, + a lot of smaller tweaks.
This makes an amazing linux-desktop, for gaming, video and audio. The
popular computer for everyman. Also boosts performance, for
resource-constrained systems.
For more advanced hacking, one could also get in there, and make several
HZ timers, extremely low ones, for the components who only require that,
and 90hz for video-components, for instance (low video/frame jitter),
and higher if anything should require that.
Also system-wide, software should be synced to hz, if required for
lowest jitter, such as animations and videoplayers, and videoplayers
automatically change refresh rate to a multiple of video framerate.
Peace Be With You.
^ permalink raw reply [flat|nested] 6+ messages in thread
* One last tweak for perfection.
2013-01-16 13:59 One last tweak for perfection Ove Karlsen
@ 2013-01-16 14:02 ` Ove Karlsen
2013-01-16 14:25 ` Ove Karlsen
0 siblings, 1 reply; 6+ messages in thread
From: Ove Karlsen @ 2013-01-16 14:02 UTC (permalink / raw)
To: LKML
What kernelthreads _needs_ to run? So I can put them on max pri renice,
along with reniced X and app. And everything else on idle priority. So
to make the app run at max efficiency, and not be starved by
kernelthreads waiting. (Or any other consideration, for giving maximal
cpu to app. Even small tweaks.)
To read my research so far, (and I have done much, about 2 years of
tweakin´ on and off.) Please see
http://paradoxuncreated.com/Blog/wordpress/?p=2268
Main points, no highres timer, 90hz timer, + a lot of smaller tweaks.
This makes an amazing linux-desktop, for gaming, video and audio. The
popular computer for everyman. Also boosts performance, for
resource-constrained systems.
For more advanced hacking, one could also get in there, and make several
HZ timers, extremely low ones, for the components who only require that,
and 90hz for video-components, for instance (low video/frame jitter),
and higher if anything should require that.
Also system-wide, software should be synced to hz, if required for
lowest jitter, such as animations and videoplayers, and videoplayers
automatically change refresh rate to a multiple of video framerate.
Peace Be With You.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: One last tweak for perfection.
2013-01-16 14:02 ` Ove Karlsen
@ 2013-01-16 14:25 ` Ove Karlsen
2013-01-16 14:27 ` Ove Karlsen
0 siblings, 1 reply; 6+ messages in thread
From: Ove Karlsen @ 2013-01-16 14:25 UTC (permalink / raw)
To: LKML
On 1/16/2013 3:02 PM, Ove Karlsen wrote:
> What kernelthreads _needs_ to run? So I can put them on max pri
> renice, along with reniced X and app. And everything else on idle
> priority. So to make the app run at max efficiency, and not be starved
> by kernelthreads waiting. (Or any other consideration, for giving
> maximal cpu to app. Even small tweaks.)
>
> To read my research so far, (and I have done much, about 2 years of
> tweakin´ on and off.) Please see
> http://paradoxuncreated.com/Blog/wordpress/?p=2268
>
> Main points, no highres timer, 90hz timer, + a lot of smaller tweaks.
> This makes an amazing linux-desktop, for gaming, video and audio. The
> popular computer for everyman. Also boosts performance, for
> resource-constrained systems.
>
> For more advanced hacking, one could also get in there, and make
> several HZ timers, extremely low ones, for the components who only
> require that, and 90hz for video-components, for instance (low
> video/frame jitter), and higher if anything should require that.
>
> Also system-wide, software should be synced to hz, if required for
> lowest jitter, such as animations and videoplayers, and videoplayers
> automatically change refresh rate to a multiple of video framerate.
>
> Peace Be With You.
PS: I forgot the realtime sincs of drivers. HZ is really not an issue to
debate for me, 90 hz is sufficient, and only to userspace, right? So
yea, forget the talk on HZ.
Peace Be With You.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: One last tweak for perfection.
2013-01-16 14:25 ` Ove Karlsen
@ 2013-01-16 14:27 ` Ove Karlsen
2013-01-16 14:28 ` Ove Karlsen
0 siblings, 1 reply; 6+ messages in thread
From: Ove Karlsen @ 2013-01-16 14:27 UTC (permalink / raw)
To: LKML
On 1/16/2013 3:25 PM, Ove Karlsen wrote:
> On 1/16/2013 3:02 PM, Ove Karlsen wrote:
>> What kernelthreads _needs_ to run? So I can put them on max pri
>> renice, along with reniced X and app. And everything else on idle
>> priority. So to make the app run at max efficiency, and not be
>> starved by kernelthreads waiting. (Or any other consideration, for
>> giving maximal cpu to app. Even small tweaks.)
>>
>> To read my research so far, (and I have done much, about 2 years of
>> tweakin´ on and off.) Please see
>> http://paradoxuncreated.com/Blog/wordpress/?p=2268
>>
>> Main points, no highres timer, 90hz timer, + a lot of smaller tweaks.
>> This makes an amazing linux-desktop, for gaming, video and audio. The
>> popular computer for everyman. Also boosts performance, for
>> resource-constrained systems.
>>
>> For more advanced hacking, one could also get in there, and make
>> several HZ timers, extremely low ones, for the components who only
>> require that, and 90hz for video-components, for instance (low
>> video/frame jitter), and higher if anything should require that.
>>
>> Also system-wide, software should be synced to hz, if required for
>> lowest jitter, such as animations and videoplayers, and videoplayers
>> automatically change refresh rate to a multiple of video framerate.
>>
>> Peace Be With You.
> PS: I forgot the realtime sincs of drivers. HZ is really not an issue
> to debate for me, 90 hz is sufficient, and only to userspace, right?
> So yea, forget the talk on HZ.
>
> Peace Be With You.
And "synced to hz" with regards to video, is the screen hz ofcourse, not
kernel.
Peace Be With You.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: One last tweak for perfection.
2013-01-16 14:27 ` Ove Karlsen
@ 2013-01-16 14:28 ` Ove Karlsen
2013-01-16 14:36 ` Ove Karlsen
0 siblings, 1 reply; 6+ messages in thread
From: Ove Karlsen @ 2013-01-16 14:28 UTC (permalink / raw)
To: LKML
On 1/16/2013 3:27 PM, Ove Karlsen wrote:
> On 1/16/2013 3:25 PM, Ove Karlsen wrote:
>> On 1/16/2013 3:02 PM, Ove Karlsen wrote:
>>> What kernelthreads _needs_ to run? So I can put them on max pri
>>> renice, along with reniced X and app. And everything else on idle
>>> priority. So to make the app run at max efficiency, and not be
>>> starved by kernelthreads waiting. (Or any other consideration, for
>>> giving maximal cpu to app. Even small tweaks.)
>>>
>>> To read my research so far, (and I have done much, about 2 years of
>>> tweakin´ on and off.) Please see
>>> http://paradoxuncreated.com/Blog/wordpress/?p=2268
>>>
>>> Main points, no highres timer, 90hz timer, + a lot of smaller tweaks.
>>> This makes an amazing linux-desktop, for gaming, video and audio. The
>>> popular computer for everyman. Also boosts performance, for
>>> resource-constrained systems.
>>>
>>> For more advanced hacking, one could also get in there, and make
>>> several HZ timers, extremely low ones, for the components who only
>>> require that, and 90hz for video-components, for instance (low
>>> video/frame jitter), and higher if anything should require that.
>>>
>>> Also system-wide, software should be synced to hz, if required for
>>> lowest jitter, such as animations and videoplayers, and videoplayers
>>> automatically change refresh rate to a multiple of video framerate.
>>>
>>> Peace Be With You.
PS: I forgot the realtime sincs of drivers. HZ is really not an issue
to debate for me, 90 hz is sufficient, and only to userspace, right?
So yea, forget the talk on HZ.
Peace Be With You.
And "synced to hz" with regards to video, is the screen hz ofcourse, not
kernel.
Peace Be With You.
(resendt due to lkml rejecting html mail)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: One last tweak for perfection.
2013-01-16 14:28 ` Ove Karlsen
@ 2013-01-16 14:36 ` Ove Karlsen
0 siblings, 0 replies; 6+ messages in thread
From: Ove Karlsen @ 2013-01-16 14:36 UTC (permalink / raw)
To: LKML
On 1/16/2013 3:28 PM, Ove Karlsen wrote:
> On 1/16/2013 3:27 PM, Ove Karlsen wrote:
>> On 1/16/2013 3:25 PM, Ove Karlsen wrote:
>>> On 1/16/2013 3:02 PM, Ove Karlsen wrote:
>>>> What kernelthreads _needs_ to run? So I can put them on max pri
>>>> renice, along with reniced X and app. And everything else on idle
>>>> priority. So to make the app run at max efficiency, and not be
>>>> starved by kernelthreads waiting. (Or any other consideration, for
>>>> giving maximal cpu to app. Even small tweaks.)
>>>>
>>>> To read my research so far, (and I have done much, about 2 years of
>>>> tweakin´ on and off.) Please see
>>>> http://paradoxuncreated.com/Blog/wordpress/?p=2268
>>>>
>>>> Main points, no highres timer, 90hz timer, + a lot of smaller tweaks.
>>>> This makes an amazing linux-desktop, for gaming, video and audio. The
>>>> popular computer for everyman. Also boosts performance, for
>>>> resource-constrained systems.
>>>>
>>>> For more advanced hacking, one could also get in there, and make
>>>> several HZ timers, extremely low ones, for the components who only
>>>> require that, and 90hz for video-components, for instance (low
>>>> video/frame jitter), and higher if anything should require that.
>>>>
>>>> Also system-wide, software should be synced to hz, if required for
>>>> lowest jitter, such as animations and videoplayers, and videoplayers
>>>> automatically change refresh rate to a multiple of video framerate.
>>>>
>>>> Peace Be With You.
> PS: I forgot the realtime sincs of drivers. HZ is really not an issue
> to debate for me, 90 hz is sufficient, and only to userspace, right?
> So yea, forget the talk on HZ.
>
> Peace Be With You.
>
> And "synced to hz" with regards to video, is the screen hz ofcourse, not
> kernel.
>
> Peace Be With You.
>
> (resendt due to lkml rejecting html mail)
>
Ok, one last argument on HZ. Screenrefresh updates HZ counter, or
similar idea to get vsynced HZ (minimal hz needed). Ofcourse it must
work better than the 90hz optimal on current timing system. A screen
refresh of 72.7 seems optimal, (quiet non-noisy, non-flickering), and so
Hz could be reduced to 72.7. Peace Be With You!
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-01-16 14:36 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-16 13:59 One last tweak for perfection Ove Karlsen
2013-01-16 14:02 ` Ove Karlsen
2013-01-16 14:25 ` Ove Karlsen
2013-01-16 14:27 ` Ove Karlsen
2013-01-16 14:28 ` Ove Karlsen
2013-01-16 14:36 ` Ove Karlsen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox