public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] ARM: davinci: da850 evm: pass platform data for adv7343 encoder
@ 2013-01-15  8:04 Lad, Prabhakar
  2013-01-22 11:57 ` Prabhakar Lad
  0 siblings, 1 reply; 3+ messages in thread
From: Lad, Prabhakar @ 2013-01-15  8:04 UTC (permalink / raw)
  To: LAK, DLOS; +Cc: LKML, Sekhar Nori, Lad, Prabhakar

Without this patch the adv7343 encoder was being set to default
configuration which caused display not to work on this board.
This patch passes the necessary platform data required for adv7343
encoder to work on da850 evm.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
---
 This patch is dependent on http://patchwork.linuxtv.org/patch/16272/

 arch/arm/mach-davinci/board-da850-evm.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0299915..d0e3ec3 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1256,11 +1256,24 @@ static struct vpif_capture_config da850_vpif_capture_config = {
 };
 
 /* VPIF display configuration */
+
+static struct adv7343_platform_data adv7343_pdata = {
+	.mode_config = {
+		.dac_3 = 1,
+		.dac_2 = 1,
+		.dac_1 = 1,
+	},
+	.sd_config = {
+		.sd_dac_out1 = 1,
+	},
+};
+
 static struct vpif_subdev_info da850_vpif_subdev[] = {
 	{
 		.name = "adv7343",
 		.board_info = {
 			I2C_BOARD_INFO("adv7343", 0x2a),
+			.platform_data = &adv7343_pdata,
 		},
 	},
 };
-- 
1.7.4.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2013-01-22 12:01 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-15  8:04 [PATCH] ARM: davinci: da850 evm: pass platform data for adv7343 encoder Lad, Prabhakar
2013-01-22 11:57 ` Prabhakar Lad
2013-01-22 12:01   ` Sekhar Nori

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox