[PATCH v3 0/2] Input: twl6040-vibra cleanups (devm_* conversion, system wq)

[PATCH v3 0/2] Input: twl6040-vibra cleanups (devm_* conversion, system wq)

[Peter Ujfalusi]

Hi Dmitry,

Changes since v2:
- twl4030-vibra patches are left out (they have been applied)
- Do not use devm_input_allocate_device() in twl6040-vibra

Changes since v1:
- Use devm_input_allocate_device()
- swtich drivers to use system workqueue

Cover letter from v1 (resend set):

This series seams to got lost:
https://lkml.org/lkml/2012/6/15/128

Can you take it for 3.9?

Convert the twl4030, twl6040 vibra drivers to use devm_ at probe time to clean
up the code a bit.
The twl6040-vibra driver needed bigger change since the ordering of the
initialization was not correct.

Regards,
Peter
---
Peter Ujfalusi (2):
  Input: twl6040-vibra: Code cleanup in probe with devm_* conversion
  input: twl6040-vibra: Use system workqueue

 drivers/input/misc/twl6040-vibra.c | 100 +++++++++++++++----------------------
 1 file changed, 41 insertions(+), 59 deletions(-)

-- 
1.8.1

[PATCH v3 1/2] Input: twl6040-vibra: Code cleanup in probe with devm_* conversion

[Peter Ujfalusi]

Convert the probe to use devm_*. At the same time reorder the calls
so we will register the input device as the last step when the driver
is loaded.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/input/misc/twl6040-vibra.c | 99 +++++++++++++++++---------------------
 1 file changed, 45 insertions(+), 54 deletions(-)

diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 71a28ee..d1e31b8 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -275,7 +275,7 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		dev_err(&pdev->dev, "couldn't allocate memory\n");
 		return -ENOMEM;
@@ -309,53 +309,23 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
 	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
 		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
-		ret = -EINVAL;
-		goto err_kzalloc;
+		return -EINVAL;
 	}
 
 	info->irq = platform_get_irq(pdev, 0);
 	if (info->irq < 0) {
 		dev_err(info->dev, "invalid irq\n");
-		ret = -EINVAL;
-		goto err_kzalloc;
+		return -EINVAL;
 	}
 
 	mutex_init(&info->mutex);
 
-	info->input_dev = input_allocate_device();
-	if (info->input_dev == NULL) {
-		dev_err(info->dev, "couldn't allocate input device\n");
-		ret = -ENOMEM;
-		goto err_kzalloc;
-	}
-
-	input_set_drvdata(info->input_dev, info);
-
-	info->input_dev->name = "twl6040:vibrator";
-	info->input_dev->id.version = 1;
-	info->input_dev->dev.parent = pdev->dev.parent;
-	info->input_dev->close = twl6040_vibra_close;
-	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
-
-	ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
-	if (ret < 0) {
-		dev_err(info->dev, "couldn't register vibrator to FF\n");
-		goto err_ialloc;
-	}
-
-	ret = input_register_device(info->input_dev);
-	if (ret < 0) {
-		dev_err(info->dev, "couldn't register input device\n");
-		goto err_iff;
-	}
-
-	platform_set_drvdata(pdev, info);
-
-	ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0,
-				   "twl6040_irq_vib", info);
+	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+					twl6040_vib_irq_handler, 0,
+					"twl6040_irq_vib", info);
 	if (ret) {
 		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
-		goto err_irq;
+		return ret;
 	}
 
 	info->supplies[0].supply = "vddvibl";
@@ -368,7 +338,7 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 				 ARRAY_SIZE(info->supplies), info->supplies);
 	if (ret) {
 		dev_err(info->dev, "couldn't get regulators %d\n", ret);
-		goto err_regulator;
+		return ret;
 	}
 
 	if (vddvibl_uV) {
@@ -377,7 +347,7 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
 				ret);
-			goto err_voltage;
+			goto err_regulator;
 		}
 	}
 
@@ -387,7 +357,7 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
 				ret);
-			goto err_voltage;
+			goto err_regulator;
 		}
 	}
 
@@ -395,26 +365,49 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	if (info->workqueue == NULL) {
 		dev_err(info->dev, "couldn't create workqueue\n");
 		ret = -ENOMEM;
-		goto err_voltage;
+		goto err_regulator;
 	}
 	INIT_WORK(&info->play_work, vibra_play_work);
 
+	info->input_dev = input_allocate_device();
+	if (info->input_dev == NULL) {
+		dev_err(info->dev, "couldn't allocate input device\n");
+		ret = -ENOMEM;
+		goto err_wq;
+	}
+
+	input_set_drvdata(info->input_dev, info);
+
+	info->input_dev->name = "twl6040:vibrator";
+	info->input_dev->id.version = 1;
+	info->input_dev->dev.parent = pdev->dev.parent;
+	info->input_dev->close = twl6040_vibra_close;
+	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
+
+	ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
+	if (ret < 0) {
+		dev_err(info->dev, "couldn't register vibrator to FF\n");
+		goto err_ialloc;
+	}
+
+	ret = input_register_device(info->input_dev);
+	if (ret < 0) {
+		dev_err(info->dev, "couldn't register input device\n");
+		goto err_iff;
+	}
+
+	platform_set_drvdata(pdev, info);
+
 	return 0;
 
-err_voltage:
-	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
-err_regulator:
-	free_irq(info->irq, info);
-err_irq:
-	input_unregister_device(info->input_dev);
-	info->input_dev = NULL;
 err_iff:
-	if (info->input_dev)
-		input_ff_destroy(info->input_dev);
+	input_ff_destroy(info->input_dev);
 err_ialloc:
 	input_free_device(info->input_dev);
-err_kzalloc:
-	kfree(info);
+err_wq:
+	destroy_workqueue(info->workqueue);
+err_regulator:
+	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
 	return ret;
 }
 
@@ -423,10 +416,8 @@ static int twl6040_vibra_remove(struct platform_device *pdev)
 	struct vibra_info *info = platform_get_drvdata(pdev);
 
 	input_unregister_device(info->input_dev);
-	free_irq(info->irq, info);
 	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
 	destroy_workqueue(info->workqueue);
-	kfree(info);
 
 	return 0;
 }
-- 
1.8.1

[PATCH v3 2/2] input: twl6040-vibra: Use system workqueue

[Peter Ujfalusi]

It is time to switch to system wq instead creating a queue for the driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/input/misc/twl6040-vibra.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index d1e31b8..0c2dfc8 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -361,19 +361,13 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 		}
 	}
 
-	info->workqueue = alloc_workqueue("twl6040-vibra", 0, 0);
-	if (info->workqueue == NULL) {
-		dev_err(info->dev, "couldn't create workqueue\n");
-		ret = -ENOMEM;
-		goto err_regulator;
-	}
 	INIT_WORK(&info->play_work, vibra_play_work);
 
 	info->input_dev = input_allocate_device();
 	if (info->input_dev == NULL) {
 		dev_err(info->dev, "couldn't allocate input device\n");
 		ret = -ENOMEM;
-		goto err_wq;
+		goto err_regulator;
 	}
 
 	input_set_drvdata(info->input_dev, info);
@@ -404,8 +398,6 @@ err_iff:
 	input_ff_destroy(info->input_dev);
 err_ialloc:
 	input_free_device(info->input_dev);
-err_wq:
-	destroy_workqueue(info->workqueue);
 err_regulator:
 	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
 	return ret;
@@ -417,7 +409,6 @@ static int twl6040_vibra_remove(struct platform_device *pdev)
 
 	input_unregister_device(info->input_dev);
 	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
-	destroy_workqueue(info->workqueue);
 
 	return 0;
 }
-- 
1.8.1

Re: [PATCH v3 0/2] Input: twl6040-vibra cleanups (devm_* conversion, system wq)

[Peter Ujfalusi]

Hi Dmitry,

On 01/14/2013 04:34 PM, Peter Ujfalusi wrote:
> Hi Dmitry,
> 
> Changes since v2:
> - twl4030-vibra patches are left out (they have been applied)
> - Do not use devm_input_allocate_device() in twl6040-vibra

Do you want me to resend this two patch for 3.9?

Regards,
Péter

> 
> Changes since v1:
> - Use devm_input_allocate_device()
> - swtich drivers to use system workqueue
> 
> Cover letter from v1 (resend set):
> 
> This series seams to got lost:
> https://lkml.org/lkml/2012/6/15/128
> 
> Can you take it for 3.9?
> 
> Convert the twl4030, twl6040 vibra drivers to use devm_ at probe time to clean
> up the code a bit.
> The twl6040-vibra driver needed bigger change since the ordering of the
> initialization was not correct.
> 
> Regards,
> Peter
> ---
> Peter Ujfalusi (2):
>   Input: twl6040-vibra: Code cleanup in probe with devm_* conversion
>   input: twl6040-vibra: Use system workqueue
> 
>  drivers/input/misc/twl6040-vibra.c | 100 +++++++++++++++----------------------
>  1 file changed, 41 insertions(+), 59 deletions(-)
> 

Re: [PATCH v3 0/2] Input: twl6040-vibra cleanups (devm_* conversion, system wq)

[Dmitry Torokhov]

Hi Peter,

On Thu, Jan 24, 2013 at 12:44:29PM +0100, Peter Ujfalusi wrote:
> Hi Dmitry,
> 
> On 01/14/2013 04:34 PM, Peter Ujfalusi wrote:
> > Hi Dmitry,
> > 
> > Changes since v2:
> > - twl4030-vibra patches are left out (they have been applied)
> > - Do not use devm_input_allocate_device() in twl6040-vibra
> 
> Do you want me to resend this two patch for 3.9?

No, I queued them for 3.9.

Thanks.

-- 
Dmitry