linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephan Mueller <stephan.mueller@atsec.com>
To: Kyle McMartin <kyle@redhat.com>
Cc: linux-kernel@vger.kernel.org, David Howells <dhowells@redhat.com>,
	rusty@rustcorp.com.au, jstancek@redhat.com,
	herbert@gondor.hengli.com.au
Subject: Re: [RFC PATCH] fips: check whether a module registering an alg or template is signed
Date: Wed, 06 Feb 2013 09:02:46 +0100	[thread overview]
Message-ID: <51120E26.7030400@atsec.com> (raw)
In-Reply-To: <20130205225830.GH3751@redacted.bos.redhat.com>

On 05.02.2013 23:58:30, +0100, Kyle McMartin <kyle@redhat.com> wrote:

Hi Kyle,

> fips mode needs to prevent unsigned modules from registering crypto
> algorithms, and currently panics if an unsigned module is attempted to
> be loaded. Instead, forbid (by returning -EINVAL) registering a crypto
> alg or template if fips mode is enabled and the module signature is not
> valid.

Just reading this paragraph, there is one missing puzzle piece: the
*entire* kernel crypto API must shut down, even if only one kernel
module with one cipher (or block chaining mode, ...) has a broken signature.

The overall requirement is: if one self test fails, the entire FIPS
140-2 crypto module must become unavailable. (please note and do not get
confused by the overload of the term "module" -- we have the KOs the
kernel loads, and we have something called a FIPS 140-2 module which is
the entire crypto "library" subject to a FIPS 140-2 validation)

This signature check is one self test required at runtime.

I added comments inline into the patch.

> 
> crypto_sig_check should return 1 (and allow the registration) if any
> of the following are true:
>  1/ fips is not enabled (but CONFIG_CRYPTO_FIPS is enabled.)
>  2/ the algorithm is built into the kernel (THIS_MODULE == NULL)
>  3/ the algorithm is in a module, and the module sig check passes
> and fail in any of the other cases.
> 
> Checking in crypto_check_alg and crypto_register_template seems to hit
> the callpoints as far as I can see.
> 
> Signed-off-by: Kyle McMartin <kyle@redhat.com>
> 
> ---
> 
> rusty,
> 
> How about something like this? It keeps the FIPS mess in the
> crypto/fips.c file (aside from something that goes away entirely in the
> !CONFIG_CRYPTO_FIPS case.)
> 
> regards, Kyle
> 
> --- a/crypto/algapi.c
> +++ b/crypto/algapi.c
> @@ -52,6 +52,9 @@ static int crypto_check_alg(struct crypto_alg *alg)
>  	if (alg->cra_priority < 0)
>  		return -EINVAL;
>  
> +	if (!crypto_sig_check(alg->cra_module))
> +		return -EINVAL;

Instead of an EINVAL, the kernel either must panic(), or a global flag
is introduced which is evaluated by every kernel crypto API call. If
that flag is, say, false, none of the kernel crypto API calls must succeed.
> +
>  	return crypto_set_driver_name(alg);
>  }
>  
> @@ -435,6 +438,11 @@ int crypto_register_template(struct crypto_template *tmpl)


I am wondering whether the modification of these two functions are
sufficient. As I wrote in a previous email, there are a number of
register functions the kernel crypto API exports and which are used.

>  			goto out;
>  	}
>  
> +	if (!crypto_sig_check(tmpl->module)) {
> +		err = -EINVAL;
> +		goto out;
> +	}
> +
>  	list_add(&tmpl->list, &crypto_template_list);
>  	crypto_notify(CRYPTO_MSG_TMPL_REGISTER, tmpl);
>  	err = 0;
> diff --git a/crypto/fips.c b/crypto/fips.c
> index 5539700..2ebbe0f 100644
> --- a/crypto/fips.c
> +++ b/crypto/fips.c
> @@ -15,6 +15,19 @@
>  int fips_enabled;
>  EXPORT_SYMBOL_GPL(fips_enabled);
>  
> +/* forbid loading modules in fips mode if the module is not signed */
> +int crypto_sig_check(struct module *m)
> +{
> +#if defined(CONFIG_MODULE_SIG)
> +	if (!fips_enabled || !m || (m && m->sig_ok))
> +		return 1;
> +	else
> +		return 0;

This code looks good.

> +#else
> +	return 1;
> +#endif
> +}
> +
>  /* Process kernel command-line parameter at boot time. fips=0 or fips=1 */
>  static int fips_enable(char *str)
>  {
> diff --git a/crypto/internal.h b/crypto/internal.h
> index 9ebedae..937bfaf 100644
> --- a/crypto/internal.h
> +++ b/crypto/internal.h
> @@ -139,5 +139,14 @@ static inline void crypto_notify(unsigned long val, void *v)
>  	blocking_notifier_call_chain(&crypto_chain, val, v);
>  }
>  
> +#if defined(CONFIG_CRYPTO_FIPS)
> +int crypto_sig_check(struct module *m);
> +#else
> +static inline int crypto_sig_check(struct module *m)
> +{
> +	return 1;
> +}
> +#endif
> +
>  #endif	/* _CRYPTO_INTERNAL_H */
>  
> 


  reply	other threads:[~2013-02-06  8:02 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-22 18:43 [PATCH] MODSIGN: only panic in fips mode if sig_enforce is set Kyle McMartin
2013-01-22 23:17 ` Rusty Russell
2013-01-23 11:26 ` David Howells
2013-01-23 15:18   ` Stephan Mueller
2013-01-24 14:59     ` Kyle McMartin
2013-01-25 11:28       ` Stephan Mueller
2013-01-24 19:06     ` [PATCH] MODSIGN: flag modules that use cryptoapi and only panic if those are unsigned Kyle McMartin
2013-01-24 19:21       ` Kyle McMartin
2013-01-24 23:36       ` Rusty Russell
2013-01-25  5:45         ` Kyle McMartin
2013-01-25 12:42         ` Stephan Mueller
2013-02-03 23:34           ` Rusty Russell
2013-01-25 12:46         ` Stephan Mueller
2013-01-25  0:14       ` David Howells
2013-01-25  3:20         ` Matthew Garrett
2013-01-25 12:23           ` Stephan Mueller
2013-01-25 12:18       ` Stephan Mueller
2013-02-05 22:58         ` [RFC PATCH] fips: check whether a module registering an alg or template is signed Kyle McMartin
2013-02-06  8:02           ` Stephan Mueller [this message]
2013-02-06 16:15             ` Kyle McMartin
2013-02-06 17:45               ` Stephan Mueller
2013-02-06 18:18                 ` Kyle McMartin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51120E26.7030400@atsec.com \
    --to=stephan.mueller@atsec.com \
    --cc=dhowells@redhat.com \
    --cc=herbert@gondor.hengli.com.au \
    --cc=jstancek@redhat.com \
    --cc=kyle@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rusty@rustcorp.com.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).