From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758608Ab3BGPMh (ORCPT ); Thu, 7 Feb 2013 10:12:37 -0500 Received: from kiruna.synopsys.com ([198.182.44.80]:56836 "EHLO kiruna.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757809Ab3BGPMg (ORCPT ); Thu, 7 Feb 2013 10:12:36 -0500 Message-ID: <5113C459.8000602@synopsys.com> Date: Thu, 7 Feb 2013 19:12:25 +0400 From: Alexey Brodkin User-Agent: Mozilla/5.0 (X11; Linux i686; rv:17.0) Gecko/20130106 Thunderbird/17.0.2 MIME-Version: 1.0 To: Grant Likely CC: Benjamin Herrenschmidt , Michal Simek , Arnd Bergmann , Vineet Gupta , Linux Kernel Mailing List , Alan Cox , "Geert Uytterhoeven" , Subject: Re: [PATCH] drivers/block/xsysace - replace in(out)_8/in(out)_be16/in(out)_le16 with generic iowrite(read)8/16(be) References: <1359475380-31512-1-git-send-email-abrodkin@synopsys.com> <1781360.cmQWHCW5SC@wuerfel> <201302041724.47331.arnd@arndb.de> <1360031367.14701.47.camel@pasglop> <1360066756.4529.6.camel@pasglop> <51111133.7000105@synopsys.com> <1360098004.4529.13.camel@pasglop> <511178AC.7080304@synopsys.com> <1360105635.2707.7.camel@pasglop> <1360186550.2650.4.camel@pasglop> In-Reply-To: Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit X-Originating-IP: [10.121.8.160] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 02/07/2013 06:51 PM, Grant Likely wrote: > On Thu, Feb 7, 2013 at 2:39 PM, Grant Likely wrote: >> On Wed, Feb 6, 2013 at 9:35 PM, Benjamin Herrenschmidt >> wrote: >>>> In fact, the driver already knows about this and figures >>>> out at runtime how the device is wired up to the bus. This is not the >>>> problem. >>> >>> Except that this is very gross, especially when you observe that in the >>> busted "big endian" case, it has to byteswap the bloody data port. >>> >>> So you end up having to do that gross hack with separate accessors for >>> registers vs. data and not able to use the _rep variants, which also >>> means that on platforms like ppc, you end up with a memory barrier on >>> every access (or more), which is going to slow things down enormously. >> >> I don't see why the _rep variants aren't usable here. The only reason >> I didn't use them when I wrote the driver in the first place was I was >> a n00b kernel hacker and I didn't know they were there. > > The 8-bit variant is different though because the hardware requires > pingponging between odd and even byte addresses to flush the fifo. > Reading a data port even address (0x40) gives the least significant > byte. Reading from an odd address (0x41) give the MSB and pops the > data off the FIFO. So, yes, the _rep variant can't be used in 8-bit > mode. It should still be fine in 16-bit. > > page 45: http://www.xilinx.com/support/documentation/data_sheets/ds080.pdf > Ok, so may I do a re-spin with these changes: 1. In "ace_in_be16" use "ioread16be" 2. In "ace_out_be16" use "iowrite16be" 3. In "ace_in_le16" use "ioread16" 4. In "ace_out_le16" use "iowrite16" 5. In "ace_datain_le16" use "ioread16_rep" 6. In "ace_dataout_le16" use "iowrite16_rep" not sure about items for "ace_datain/out_be16" - what about _rep options here? -Alexey