* WCH CH352 PCI-to-RS232 card bad default type
@ 2013-03-21 7:14 Vitaliy Bortsov
0 siblings, 0 replies; only message in thread
From: Vitaliy Bortsov @ 2013-03-21 7:14 UTC (permalink / raw)
To: linux-kernel
Hello.
According to manufacture chip information from
http://wch-ic.com/product/pci/ch352.asp type of emulated chip cannot be
16C550A (it is default value in linux and in patch
https://lkml.org/lkml/2013/3/2/30 ). Correct value is 16550.
Therefore I need to run additional command
setserial /dev/ttySx uart 16550
Default value 16550A is not working, correct value 16550 is working on
my PCI-RS232card.
Please somebody make changes to module
drivers/tty/serial/8250/8250_pci.c (as I think).
Regards,
Vitaliy
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-03-21 7:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-21 7:14 WCH CH352 PCI-to-RS232 card bad default type Vitaliy Bortsov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox