From: Hector Palacios <hector.palacios@digi.com>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: Marek Vasut <marex@denx.de>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Fabio Estevam <festevam@gmail.com>
Subject: Re: BUG: soft lockup when recording audio on MX28EVK with ASoC sgtl5000
Date: Mon, 25 Mar 2013 17:53:51 +0100 [thread overview]
Message-ID: <5150811F.6070904@digi.com> (raw)
In-Reply-To: <20130325152548.GD30232@S2101-09.ap.freescale.net>
On 03/25/2013 04:25 PM, Shawn Guo wrote:
> On Mon, Mar 25, 2013 at 01:10:54PM +0100, Marek Vasut wrote:
>> Dear Hector Palacios,
>>
>> CCing Shawn, this might also explain the touchscreen issue.
>>
>>> Hello,
>>>
>>> I just tried recording audio on Freescale's MX28EVK that uses ASoC sgtl5000
>>> (kernel v3.8) with:
>>>
>>> arecord -M -f cd sound.wav --duration 10
>>>
>>> and got a scheduler message:
>>>
>>> [ 789.041847] [sched_delayed] sched: RT throttling activated
>
> Hmm, I'm not sure if v3.8 is the first place where audio recording gets
> broken. Does v3.7 even work for you?
No it doesn't. Same issue. Apparently a little different order (first the 'BUG soft
lockup', then the 'sched: RT throttling activated')
~# arecord -M -f cd sound.wav --duration 10
Recording WAVE 'sound.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
overrun!!! (at least 0.063 ms long)
[ 188.070000] BUG: soft lockup - CPU#0 stuck for 23s! [arecord:230]
[ 188.070000] Modules linked in:
[ 188.070000] irq event stamp: 2318718
[ 188.070000] hardirqs last enabled at (2318717): [<c000ee68>] __irq_svc+0x48/0x54
[ 188.070000] hardirqs last disabled at (2318718): [<c000ee54>] __irq_svc+0x34/0x54
[ 188.070000] softirqs last enabled at (2317860): [<c0025e98>] __do_softirq+0x13c/0x220
[ 188.070000] softirqs last disabled at (2317847): [<c002606c>] irq_exit+0x8c/0x94
[ 188.070000]
[ 188.070000] Pid: 230, comm: arecord
[ 188.070000] CPU: 0 Not tainted (3.7.0-00027-g46709ea-dirty #8)
[ 188.070000] PC is at __flush_whole_cache+0x4/0x18
[ 188.070000] LR is at unmap_kernel_range+0x10/0x2c
[ 188.070000] pc : [<c001a048>] lr : [<c00c30d4>] psr: 00000013
[ 188.070000] sp : cf7b3e68 ip : 00000000 fp : 00000000
[ 188.070000] r10: 00040000 r9 : cf6d4e00 r8 : c061a7dc
[ 188.070000] r7 : d0804000 r6 : d0940000 r5 : d0944000 r4 : d0940000
[ 188.070000] r3 : 20000008 r2 : 00000004 r1 : 00004000 r0 : d0940000
[ 188.070000] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 188.070000] Control: 0005317f Table: 4ec2c000 DAC: 00000015
[ 188.070000] [<c00151ac>] (unwind_backtrace+0x0/0xf4) from [<c006bd84>]
(watchdog_timer_fn+0x128/0x168)
[ 188.070000] [<c006bd84>] (watchdog_timer_fn+0x128/0x168) from [<c00422cc>]
(__run_hrtimer+0x7c/0x1e8)
[ 188.070000] [<c00422cc>] (__run_hrtimer+0x7c/0x1e8) from [<c00427e4>]
(hrtimer_interrupt+0x110/0x310)
[ 188.070000] [<c00427e4>] (hrtimer_interrupt+0x110/0x310) from [<c001a780>]
(mxs_timer_interrupt+0x1c/0x28)
[ 188.070000] [<c001a780>] (mxs_timer_interrupt+0x1c/0x28) from [<c006c404>]
(handle_irq_event_percpu+0x5c/0x26c)
[ 188.070000] [<c006c404>] (handle_irq_event_percpu+0x5c/0x26c) from [<c006c650>]
(handle_irq_event+0x3c/0x5c)
[ 188.070000] [<c006c650>] (handle_irq_event+0x3c/0x5c) from [<c006ec14>]
(handle_level_irq+0x8c/0x118)
[ 188.070000] [<c006ec14>] (handle_level_irq+0x8c/0x118) from [<c006c398>]
(generic_handle_irq+0x28/0x30)
[ 188.070000] [<c006c398>] (generic_handle_irq+0x28/0x30) from [<c00100fc>]
(handle_IRQ+0x30/0x84)
[ 188.070000] [<c00100fc>] (handle_IRQ+0x30/0x84) from [<c00086ec>]
(icoll_handle_irq+0x30/0x44)
[ 188.070000] [<c00086ec>] (icoll_handle_irq+0x30/0x44) from [<c000ee64>]
(__irq_svc+0x44/0x54)
[ 188.070000] Exception stack(0xcf7b3e20 to 0xcf7b3e68)
[ 188.070000] 3e20: d0940000 00004000 00000004 20000008 d0940000 d0944000 d0940000
d0804000
[ 188.070000] 3e40: c061a7dc cf6d4e00 00040000 00000000 00000000 cf7b3e68 c00c30d4
c001a048
[ 188.070000] 3e60: 00000013 ffffffff
[ 188.070000] [<c000ee64>] (__irq_svc+0x44/0x54) from [<c001a048>]
(__flush_whole_cache+0x4/0x18)
[ 188.070000] [<c001a048>] (__flush_whole_cache+0x4/0x18) from [<cf76f900>] (0xcf76f900)
[ 215.620000] [sched_delayed] sched: RT throttling activated
--
Héctor Palacios
next prev parent reply other threads:[~2013-03-25 16:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-25 10:52 BUG: soft lockup when recording audio on MX28EVK with ASoC sgtl5000 Hector Palacios
2013-03-25 12:10 ` Marek Vasut
2013-03-25 15:25 ` Shawn Guo
2013-03-25 16:53 ` Hector Palacios [this message]
2013-03-25 19:31 ` Fabio Estevam
2013-03-25 23:15 ` Fabio Estevam
2013-03-26 11:43 ` Hector Palacios
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5150811F.6070904@digi.com \
--to=hector.palacios@digi.com \
--cc=festevam@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox