ALSA regression Macbook Air 5,2: No sound from the loudspeaker

ALSA regression Macbook Air 5,2: No sound from the loudspeaker

[Daniel Wagner]

Hi,

I experience a regression on my Macbook Air 2012 model with the 3.9-rc 
kernels (v3.9-rc2-284-gaea8b5d) The symptoms are that there is just no 
sound from the loudspeakers. The headphone output works fine.

I was able to pin point it down to one commit

1077a024 "ALSA: hda - Use generic parser for Cirrus codec"

If I revert this one and all came back to work. By comparing the 
alsa-info.txt output I figured that there is something wrong with the 
GPIO settings on node 0x01:

This is the excerpt with the previous patch mentioned reverted:


Codec: Cirrus Logic CS4206
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10134206
Subsystem Id: 0x106b5600
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
     rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
     bits [0x1e]: 16 20 24 32
     formats [0x3]: PCM FLOAT
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
   Power states:  D0 D3 CLKSTOP EPSS
   Power: setting=D0, actual=D0
GPIO: io=4, o=0, i=0, unsolicited=0, wake=0
   IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
   IO[1]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
   IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
   IO[3]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0


and here the output vanilla kernel:


Codec: Cirrus Logic CS4206
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10134206
Subsystem Id: 0x106b5600
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
     rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
     bits [0x1e]: 16 20 24 32
     formats [0x3]: PCM FLOAT
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
   Power states:  D0 D3 CLKSTOP EPSS
   Power: setting=D0, actual=D0
GPIO: io=4, o=0, i=0, unsolicited=0, wake=0
   IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
   IO[1]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
   IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
   IO[3]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0


The diff is "IO[3] data=1 vs data=0". I used then the patch function 
from the awesome hda-analyzer tool to patch this on the vanilla kernel 
and there suddenly I have output from the speakers.

I don't know if someone else has reported this already or if there is 
already a fix. I was without internet for few days and didn't report 
this in time. If that is the case, sorry for the noise.


The complete logs from hda-analyzer are here:

http://www.monom.org/misc/alsa/alsa-info.txt-v3.9-rc2-284-gaea8b5d
http://www.monom.org/misc/alsa/alsa-info.txt-revert-1077a024


cheers,
daniel

Re: [alsa-devel] ALSA regression Macbook Air 5, 2: No sound from the loudspeaker

[Daniel Wagner]

On 03/25/2013 07:46 PM, Daniel Wagner wrote:
> I experience a regression on my Macbook Air 2012 model with the 3.9-rc
> kernels (v3.9-rc2-284-gaea8b5d) The symptoms are that there is just no
> sound from the loudspeakers. The headphone output works fine.

Oh, there is already a fix in the mainline tree.

   ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs


Haven't tested it yet but looks like then one I was looking for.

cheers,
daniel