From: Hector Palacios <hector.palacios@digi.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: <linux-mmc@vger.kernel.org>, <kernel@pengutronix.de>,
<cjb@laptop.org>, <aletes.xgr@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Marek Vasut <marex@denx.de>, Shawn Guo <shawn.guo@linaro.org>
Subject: Re: [PATCH v2 2/2] mmc: mxs-mmc: add non-removable property
Date: Tue, 9 Apr 2013 17:14:27 +0200 [thread overview]
Message-ID: <51643053.7030302@digi.com> (raw)
In-Reply-To: <1365166070-9370-3-git-send-email-mkl@pengutronix.de>
Dear Marc Kleine-Budde,
On 04/05/2013 02:47 PM, Marc Kleine-Budde wrote:
> Some boards have non removable cards like eMMC. Handle such case.
>
> Acked-by: Shawn Guo <shawn.guo@linaro.org>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> ---
> changes since v1:
> - fix removeable typo
>
> drivers/mmc/host/mxs-mmc.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> index 0cdf1f6..c231881 100644
> --- a/drivers/mmc/host/mxs-mmc.c
> +++ b/drivers/mmc/host/mxs-mmc.c
> @@ -73,6 +73,7 @@ struct mxs_mmc_host {
> int wp_gpio;
> bool wp_inverted;
> bool cd_inverted;
> + bool non_removable;
> };
>
> static int mxs_mmc_get_ro(struct mmc_host *mmc)
> @@ -96,8 +97,9 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
> struct mxs_mmc_host *host = mmc_priv(mmc);
> struct mxs_ssp *ssp = &host->ssp;
>
> - return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
> - BM_SSP_STATUS_CARD_DETECT)) ^ host->cd_inverted;
> + return host->non_removable ||
> + !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
> + BM_SSP_STATUS_CARD_DETECT) ^ host->cd_inverted;
> }
>
> static void mxs_mmc_reset(struct mxs_mmc_host *host)
> @@ -687,8 +689,10 @@ static int mxs_mmc_probe(struct platform_device *pdev)
> mmc->caps |= MMC_CAP_4_BIT_DATA;
> else if (bus_width == 8)
> mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
> + host->non_removable = of_property_read_bool(np, "non-removable");
> + if (host->non_removable)
> + mmc->caps |= MMC_CAP_NONREMOVABLE;
> host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
> -
> if (flags & OF_GPIO_ACTIVE_LOW)
> host->wp_inverted = 1;
>
>
It looks like Alexander and I were looking at the same in different threads:
http://comments.gmane.org/gmane.linux.kernel.mmc/19964
http://comments.gmane.org/gmane.linux.kernel/1471409
The following completes your 2/2 patch with broken-cd support as well (in both cases
system must assume card is always present):
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 206fe49..7a60097 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -72,6 +72,8 @@ struct mxs_mmc_host {
int sdio_irq_en;
int wp_gpio;
bool wp_inverted;
+ bool broken_cd;
+ bool non_removable;
};
static int mxs_mmc_get_ro(struct mmc_host *mmc)
@@ -95,7 +97,8 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
struct mxs_mmc_host *host = mmc_priv(mmc);
struct mxs_ssp *ssp = &host->ssp;
- return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
+ return host->non_removable || host->broken_cd ||
+ !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
BM_SSP_STATUS_CARD_DETECT);
}
@@ -686,8 +689,11 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mmc->caps |= MMC_CAP_4_BIT_DATA;
else if (bus_width == 8)
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+ host->broken_cd = of_property_read_bool(np, "broken-cd");
+ host->non_removable = of_property_read_bool(np, "non-removable");
+ if (host->non_removable)
+ mmc->caps |= MMC_CAP_NONREMOVABLE;
host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
-
if (flags & OF_GPIO_ACTIVE_LOW)
host->wp_inverted = 1;
Regards,
--
Héctor Palacios
next parent reply other threads:[~2013-04-09 15:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1365166070-9370-1-git-send-email-mkl@pengutronix.de>
[not found] ` <1365166070-9370-3-git-send-email-mkl@pengutronix.de>
2013-04-09 15:14 ` Hector Palacios [this message]
2013-04-09 15:21 ` [PATCH v2 2/2] mmc: mxs-mmc: add non-removable property Hector Palacios
2013-04-09 16:34 ` Marc Kleine-Budde
2013-04-10 8:19 ` Hector Palacios
2013-04-10 9:16 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51643053.7030302@digi.com \
--to=hector.palacios@digi.com \
--cc=aletes.xgr@gmail.com \
--cc=cjb@laptop.org \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=marex@denx.de \
--cc=mkl@pengutronix.de \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox