Re: [PATCH] rtc: rtc-s3c: use clk_prepare_enable and clk_disable_unprepare

[Sylwester Nawrocki <s.nawrocki@samsung.com>]

On 04/09/2013 04:27 PM, Vivek Gautam wrote:
> From: Thomas Abraham <thomas.abraham@linaro.org>
> 
> Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
> calls as required by common clock framework.
> 
> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>

Thanks Vivek.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

> ---
> 
> The v1 of this patch is pretty old, but the change needs to be merged to
> avoid getting those needless WARN_ON() dumps on console.
> 
> Changes from v1:
>  - Not using clk_disable_unprepare() at the end of s3c_rtc_probe(), since
>    this will unprepare the rtc clock which is again getting used in other
>    funtions later.
>  - Using clk_unprepare() at the remove() instead to fix things up.
> 
>  drivers/rtc/rtc-s3c.c |    5 +++--
>  1 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
> index fb994e9..e3528c9 100644
> --- a/drivers/rtc/rtc-s3c.c
> +++ b/drivers/rtc/rtc-s3c.c
> @@ -430,6 +430,7 @@ static int s3c_rtc_remove(struct platform_device *dev)
>  
>  	s3c_rtc_setaie(&dev->dev, 0);
>  
> +	clk_unprepare(rtc_clk);
>  	rtc_clk = NULL;
>  
>  	return 0;
> @@ -498,7 +499,7 @@ static int s3c_rtc_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> -	clk_enable(rtc_clk);
> +	clk_prepare_enable(rtc_clk);
>  
>  	/* check to see if everything is setup correctly */
>  
> @@ -578,7 +579,7 @@ static int s3c_rtc_probe(struct platform_device *pdev)
>  
>   err_nortc:
>  	s3c_rtc_enable(pdev, 0);
> -	clk_disable(rtc_clk);
> +	clk_disable_unprepare(rtc_clk);
>  
>  	return ret;
>  }