[PATCH] USB: ehci-omap: Select USB_PHY

[Roger Quadros <rogerq@ti.com>]

Hi Greg,

The following patch gets rid of Kbuild warnings when USB_EHCI_HCD_OMAP
is enabled.

Patch is based on your usb-next branch and is needed for 3.10.

From: Roger Quadros <rogerq@ti.com>
Date: Thu, 11 Apr 2013 12:08:19 +0300
Subject: [PATCH] USB: ehci-omap: Select USB_PHY

As we need NOP_USB_XCEIV which depends on USB_PHY
we need to select USB_PHY as well.

Gets rid of the below warnings when USB_EHCI_HCD_OMAP
is enabled.

warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY)
warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY)

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/usb/host/Kconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c0be25c..931b437 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -150,6 +150,7 @@ config USB_EHCI_MXC
 config USB_EHCI_HCD_OMAP
 	tristate "EHCI support for OMAP3 and later chips"
 	depends on ARCH_OMAP
+	select USB_PHY
 	select NOP_USB_XCEIV
 	default y
 	---help---
-- 
1.7.4.1