Re: [PATCH 5/5] kexec: X86: Pass memory ranges via e820 table instead of memmap= boot parameter

["H. Peter Anvin" <hpa@zytor.com>]

On 04/11/2013 07:55 AM, Yinghai Lu wrote:
> On Thu, Apr 11, 2013 at 5:26 AM, Thomas Renninger <trenn@suse.de> wrote:
>> Currently ranges are passed via kernel boot parameters:
>> memmap=exactmap memmap=X#Y memmap=
>>
>> Pass them via e820 table directly instead.
> 
> how to address "saved_max_pfn" referring in kernel?
> 
> kernel need to use saved_max_pfn from old e820 in
> drivers/char/mem.c::read_oldmem()
> 
> mips and powerpc they are passing that from command line "savemaxmem="
> 
> x86 should use that too?
> 

Oh bloody hell, yet another f-ing "max_pfn" variable.

The *only* one that makes any kind of sense is max_low_pfn (marking the
cutoff to highmem)... the pretty much the rest of them are just plain wrong.

And I don't mean "mildly annoying", I mean "catastrophically wrong
semantics".  In this case, it introduces a completely arbitrary
distinction between a nonmemory range below a high water mark and a
nonmemory range above that high water mark.  In fact, from reading the
code it seems pretty clear that the device will blindly assume that
anything below saved_max_pfn is memory and will try to map it
cachable... which will #MC on quite a few machines.

This kind of crap HAS TO STOP.  Memory is discontiguous, deal with it
and deal with it properly.

I also have to admit that I don't see the difference between /dev/mem
and /dev/oldmem, as the former allows access to memory ranges outside
the ones used by the current kernel, which is what the oldmem device
seems to be intended to od.

	-hpa


-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.