Re: [PATCH] ARM: kirkwood: add button for OpenBlock A6

[Gregory CLEMENT <gregory.clement@free-electrons.com>]

On 05/02/2013 09:43 PM, Gregory CLEMENT wrote:
> The OpenBlocks A6 board has one software-controlled button on the
> front side, labeled "INIT", so we add minimal support for this button
> in the kernel.
> 

Oh, I found that Thomas have already submitted the same patch but I was
misleaded because I didn't find anything related to this in v3.9,
nor in next-20130502.

You can drop this patch of course, but waht happens to Thomas' patch?

> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
>  arch/arm/boot/dts/kirkwood-openblocks_a6.dts |   13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> index d27f724..627d8d0 100644
> --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> @@ -209,4 +209,17 @@
>  			gpios = <&gpio1 11 1>;
>  		};
>          };
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +			button@1 {
> +			label = "Init Button";
> +			linux,code = <116>;
> +			gpios = <&gpio1 6 0>;
> +		};
> +	};
> +
>  };
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com