Re: [PATCH RFC] clk: Introduce userspace clock driver

["Emilio López" <emilio@elopez.com.ar>]

Hi,

El 10/05/13 14:31, Soren Brinkmann escribió:
> The userspace clock driver can be used to expose clock controls through
> sysfs to userspace. The driver creates entries in /sys/class/clk.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> ---
>  .../devicetree/bindings/clock/clk-userspace.txt    |   7 +
>  drivers/clk/Kconfig                                |   9 ++
>  drivers/clk/Makefile                               |   1 +
>  drivers/clk/clk-userspace.c                        | 169 +++++++++++++++++++++
>  4 files changed, 186 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/clk-userspace.txt
>  create mode 100644 drivers/clk/clk-userspace.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/clk-userspace.txt b/Documentation/devicetree/bindings/clock/clk-userspace.txt
> new file mode 100644
> index 0000000..2d153c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/clk-userspace.txt
> @@ -0,0 +1,7 @@
> +
> +Example:
> +	usclk: usclk {
> +		compatible = "clk-userspace";
> +		clocks = <&foo 15>, <&bar>;
> +		clock-count = <2>;
> +	};

Does this belong on DT? It isn't describing hardware, is it?

> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 0357ac4..b35b62c 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -81,6 +81,15 @@ config COMMON_CLK_AXI_CLKGEN
>  	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
>  	  FPGAs. It is commonly used in Analog Devices' reference designs.
>  
> +config COMMON_CLK_USERSPACE
> +	bool "Userspace Clock Controls"
> +	depends on OF
> +	depends on SYSFS
> +	help
> +	---help---
> +	  Expose clock controls through sysfs to userspace. Clocks are selected
> +	  through the device tree and the controls are exposed in
> +	  /sys/class/clk.
>  endmenu
>  
>  source "drivers/clk/mvebu/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index fa435bc..f2f68c8 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-rate.o
>  obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o
>  obj-$(CONFIG_COMMON_CLK)	+= clk-mux.o
>  obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
> +obj-$(CONFIG_COMMON_CLK_USERSPACE) += clk-userspace.o
>  
>  # SoCs specific
>  obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
> diff --git a/drivers/clk/clk-userspace.c b/drivers/clk/clk-userspace.c
> new file mode 100644
> index 0000000..931cf92
> --- /dev/null
> +++ b/drivers/clk/clk-userspace.c
> @@ -0,0 +1,169 @@
> +/*
> + * Userspace clock driver
> + *
> + *  Copyright (C) 2013 Xilinx
> + *
> + *  Sören Brinkmann <soren.brinkmann@xilinx.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License v2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Expose clock controls through sysfs to userspace.
> + *
> + * By writing 0/1 to 'enable' the clock can be disabled/enabled. Reading
> + * that file returns the current state - 0 = disabled, 1 = enabled.
> + *
> + * Reading 'set_rate' returns the current clock frequency in Hz. Writing
> + * the file requests setting a new frequency in Hz.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/fs.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/device.h>
> +#include <linux/slab.h>
> +
> +#define DRIVER_NAME	"clk-userspace"
> +
> +struct usclk_data {
> +	struct clk *clk;
> +	int enabled;
> +};
> +
> +static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
> +		char *buf)
> +{
> +	struct usclk_data *pdata = dev_get_drvdata(dev);
> +
> +	return scnprintf(buf, PAGE_SIZE, "%u\n", pdata->enabled);
> +}
> +
> +static ssize_t enable_store(struct device *dev, struct device_attribute *attr,
> +		const char *buf, size_t count)
> +{
> +	unsigned long enable;
> +	int ret;
> +	struct usclk_data *pdata = dev_get_drvdata(dev);
> +
> +	ret = kstrtoul(buf, 0, &enable);
> +	if (ret)
> +		return -EINVAL;
> +
> +	enable = !!enable;
> +	if (enable == pdata->enabled)
> +		return count;
> +
> +	if (enable)
> +		ret = clk_prepare_enable(pdata->clk);
> +	else
> +		clk_disable_unprepare(pdata->clk);
> +
> +	if (ret)
> +		return -EBUSY;
> +
> +	pdata->enabled = enable;
> +	return count;
> +}
> +
> +static DEVICE_ATTR(enable, 0644, enable_show, enable_store);
> +
> +static ssize_t set_rate_show(struct device *dev, struct device_attribute *attr,
> +		char *buf)
> +{
> +	struct usclk_data *pdata = dev_get_drvdata(dev);
> +
> +	return scnprintf(buf, PAGE_SIZE, "%lu\n", clk_get_rate(pdata->clk));
> +}
> +
> +static ssize_t set_rate_store(struct device *dev, struct device_attribute *attr,
> +		const char *buf, size_t count)
> +{
> +	int ret = 0;
> +	unsigned long rate;
> +	struct usclk_data *pdata = dev_get_drvdata(dev);
> +
> +	ret = kstrtoul(buf, 0, &rate);
> +	if (ret)
> +		return -EINVAL;
> +
> +	rate = clk_round_rate(pdata->clk, rate);
> +	ret = clk_set_rate(pdata->clk, rate);
> +	if (ret)
> +		return -EBUSY;
> +
> +	return count;
> +}
> +
> +static DEVICE_ATTR(set_rate, 0644, set_rate_show, set_rate_store);
> +
> +static const struct attribute *usclk_attrs[] = {
> +	&dev_attr_enable.attr,
> +	&dev_attr_set_rate.attr,
> +	NULL
> +};

For debugging purposes, being able to change parents would be nice too.
Maybe this belongs to debugfs instead of sysfs though.

> +
> +static const struct attribute_group usclk_attr_grp = {
> +	.attrs = (struct attribute **)usclk_attrs,
> +};
> +
> +static int usclk_setup(void)
> +{
> +	int ret;
> +	int i;
> +	struct usclk_data *pdata;
> +	u32 clock_count;
> +	struct class *clk_class;
> +	struct device *dev;
> +	struct device_node *np = of_find_compatible_node(NULL, NULL,
> +			"clk-userspace");
> +
> +	ret = of_property_read_u32(np, "clock-count", &clock_count);
> +	if (ret || !clock_count)
> +		return ret;
> +
> +	pdata = kzalloc(clock_count * sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return -ENOMEM;
> +
> +	clk_class = class_create(THIS_MODULE, "clk");
> +	if (!clk_class) {
> +		pr_err("unable to create class\n");
> +		goto err_free;
> +	}
> +
> +	for (i = 0; i < clock_count; i++) {
> +		pdata[i].clk = of_clk_get(np, i);
> +		if (IS_ERR(pdata[i].clk)) {
> +			pr_warn("input clock #%u not found\n", i);
> +			continue;
> +		}
> +
> +		dev = device_create(clk_class, NULL, MKDEV(0, 0), NULL,
> +				of_clk_get_parent_name(np, i));
> +		if (!dev) {
> +			pr_warn("unable to create device #%d\n", i);
> +			continue;
> +		}
> +
> +		dev_set_drvdata(dev, &pdata[i]);
> +		sysfs_create_group(&dev->kobj, &usclk_attr_grp);
> +	}
> +
> +	return 0;
> +
> +err_free:
> +	kfree(pdata);
> +
> +	return ret;
> +}
> +late_initcall(usclk_setup);
>