* ata1.00: failed to enable AA (error_mask=0x1)
@ 2013-05-24 23:50 Milen Kidane
0 siblings, 0 replies; only message in thread
From: Milen Kidane @ 2013-05-24 23:50 UTC (permalink / raw)
To: linux-kernel
Hello,
Please advise if you can help me with bellow problem. I receive the
following messages on boot:
May 25 01:52:37 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 25 01:52:37 Leny kernel: ata1.00: ATA-8: ST500LM012 HN-M500MBB,
2AR10001, max UDMA/100
May 25 01:52:37 Leny kernel: ata1.00: 976773168 sectors, multi 0: LBA48
NCQ (depth 31/32)
May 25 01:52:37 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 25 01:52:37 Leny kernel: ata1.00: configured for UDMA/100
May 25 01:52:37 Leny kernel: scsi 0:0:0:0: Direct-Access ATA
ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
lspci shows the following:
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller (rev 05)
Subsystem: Lenovo Device 3975
Kernel driver in use: ahci
Kernel modules: ahci
I have read topics varying from "it's nothing" to "your HDD will fail
soon", so I really do not know what is this.
Please cc me in the reply if you can. Thank you very much.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-05-24 23:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-24 23:50 ata1.00: failed to enable AA (error_mask=0x1) Milen Kidane
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox