Re: [PATCH V4 00/30] thermal: exynos: Add thermal driver for exynos5440

[Eduardo Valentin <eduardo.valentin@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 7695 bytes --]

On 04-06-2013 00:55, amit daniel kachhap wrote:
> Hi Eduardo,
> 
> On Wed, May 15, 2013 at 8:14 PM, Eduardo Valentin
> <eduardo.valentin@ti.com> wrote:
>> On 14-05-2013 05:58, Amit Daniel Kachhap wrote:
>>> Changes in V4:
>>>  Almost all the changes in this version is as per suggestion from Eduardo.The
>>>  major ones are listed below,
>>> * Added kconfig symbol ARCH_HAS_TMU which needs to be enabled by platform. With
>>>   this change existing symbol EXYNOS_TMU_DATA is not needed.
>>
>> I was more thinking if we could have a single flag that we could use in
>> thermal drivers. Besides, my proposal for ARCH_HAS_BANDGAP is still not
>> merged yet.
> 
> yes a single flag might be useful such as ARCH_HAS_THERMAL but this
> patch can work as an intermediate solution.

I think bandgap is a generic enough term IMO.

[1] - http://en.wikipedia.org/wiki/Bandgap_voltage_reference
[2] - http://en.wikipedia.org/wiki/Silicon_bandgap_temperature_sensor


> 
> Thanks,
> Amit Daniel
>>
>>> * Movement of freq_clip_table from exynos_tmu.h to exynos_thermal_common.h is
>>>   explained in the commit logs.
>>> * Wrote all register description documentation.
>>> * Split 5440 TMU support patch into controller change, configuration data and
>>>   feature addition patches.
>>> * Remove all *LINUX_* in the header files.
>>> * Still regulator enable is kept optional but a TODO: comment is added to fix
>>>   it later.
>>>
>>> Changes in V3:
>>> * Added proper dependency of different exynos thermal Kconfig symbols. Basically 3
>>>  Kconfig can be enabled now and corresponds to tmu driver. exynos common part
>>>  and exynos configuration data. This issue was raised by Rui Zhang.
>>>
>>> Changes in V2:
>>> * Separated SOC data from TMU driver. This is as per suggestion from Eduardo.
>>> * Merged the new file created for exynos5440 TMU controller with the existing
>>>  TMU controller code.
>>> * Removed the DT parsing code as now the SOC specific data are cleanly put
>>>  inside the data specific file.
>>> * Even the register definations/bitfields are treated as data as there is
>>>  some variation across SOC's.
>>>
>>> This patchset adds TMU(Thermal management Unit) driver support for
>>> exynos5440 platform. There are 3 instances of the TMU controllers so
>>> necessary cleanup/re-structure is done to handle multiple thermal zone.
>>>
>>> Patch (exynos4: Add documentation for Exynos SoC thermal bindings) from
>>> Lukasz Majewski is already posted to mainline. Adding it here for completeness.
>>> (http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg17817.html)
>>>
>>> Patch (thermal: exynos: Support thermal tripping ) from Jonghwan Choi is
>>> added here with some changes.
>>> (https://patchwork.kernel.org/patch/1668371/)
>>>
>>> Patch (thermal: exynos: Support for TMU regulator defined at device tree)
>>> is a repost of my earlier patch(https://patchwork-mail1.kernel.org/patch/2510771/)
>>> and adds regulator support.
>>>
>>> Patch (ARM: dts: Add device tree node for exynos5440 TMU controller) and
>>> patch (arm: exynos: enable ARCH_HAS_TMU) can be merged through exynos platform
>>> maintainer as this can cause merge conflict.
>>>
>>> All these patches are based on thermal maintainers git tree,
>>> git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git next.
>>>
>>> Amit Daniel Kachhap (29):
>>>   thermal: exynos: Moving exynos thermal files into samsung directory
>>>   thermal: exynos: Add ARCH_HAS_TMU config to know the supported soc's
>>>   thermal: exynos: Remove CPU_THERMAL dependency for using TMU driver
>>>   thermal: exynos: Bifurcate exynos thermal common and tmu controller
>>>     code
>>>   thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c
>>>   thermal: exynos: Move exynos_thermal.h from include/* to driver/*
>>>     folder
>>>   thermal: exynos: Bifurcate exynos tmu driver and configuration data
>>>   thermal: exynos: Add missing definations and code cleanup
>>>   thermal: exynos: Add extra entries in the tmu platform data
>>>   thermal: exynos: Support thermal tripping
>>>   thermal: exynos: Move register definitions from driver file to data
>>>     file
>>>   thermal: exynos: Fix to clear only the generated interrupts
>>>   thermal: exynos: Add support for instance based register/unregister
>>>   thermal: exynos: Modify private_data to appropriate name driver_data
>>>   thermal: exynos: Return success even if no cooling data supplied
>>>   thermal: exynos: Make the zone handling dependent on trip count
>>>   thermal: exynos: Add support to handle many instances of TMU
>>>   thermal: exynos: Add TMU features to check instead of using SOC type
>>>   thermal: exynos: use device resource management infrastructure
>>>   thermal: exynos: Add support to access common register for
>>>     multistance
>>>   thermal: exynos: Add support for exynos5440 TMU sensor.
>>>   thermal: exynos: Fix to set the second point correction value
>>>     properly
>>>   thermal: exynos: Add thermal configuration data for exynos5440 TMU
>>>     sensor
>>>   thermal: exynos: Add a compensation logic on swapped e-fuse values
>>>   thermal: exynos: Add hardware mode thermal calibration support
>>>   Documentation: thermal: Explain the exynos thermal driver model
>>>   thermal: exynos: Support for TMU regulator defined at device tree
>>>   ARM: dts: Add device tree node for exynos5440 TMU controller
>>>   arm: exynos: enable ARCH_HAS_TMU
>>>
>>> Lukasz Majewski (1):
>>>   ARM: dts: thermal: exynos4: Add documentation for Exynos SoC thermal
>>>     bindings
>>>
>>>  .../devicetree/bindings/thermal/exynos-thermal.txt |   53 +
>>>  Documentation/thermal/exynos_thermal               |   43 +-
>>>  arch/arm/boot/dts/exynos5440.dtsi                  |   30 +
>>>  arch/arm/mach-exynos/Kconfig                       |    5 +
>>>  drivers/thermal/Kconfig                            |   13 +-
>>>  drivers/thermal/Makefile                           |    2 +-
>>>  drivers/thermal/exynos_thermal.c                   | 1066 --------------------
>>>  drivers/thermal/samsung/Kconfig                    |   21 +
>>>  drivers/thermal/samsung/Makefile                   |    7 +
>>>  drivers/thermal/samsung/exynos_thermal_common.c    |  407 ++++++++
>>>  drivers/thermal/samsung/exynos_thermal_common.h    |   98 ++
>>>  drivers/thermal/samsung/exynos_tmu.c               |  741 ++++++++++++++
>>>  drivers/thermal/samsung/exynos_tmu.h               |  294 ++++++
>>>  drivers/thermal/samsung/exynos_tmu_data.c          |  225 ++++
>>>  drivers/thermal/samsung/exynos_tmu_data.h          |  155 +++
>>>  include/linux/platform_data/exynos_thermal.h       |  119 ---
>>>  16 files changed, 2076 insertions(+), 1203 deletions(-)
>>>  create mode 100644 Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>>>  delete mode 100644 drivers/thermal/exynos_thermal.c
>>>  create mode 100644 drivers/thermal/samsung/Kconfig
>>>  create mode 100644 drivers/thermal/samsung/Makefile
>>>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
>>>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.h
>>>  create mode 100644 drivers/thermal/samsung/exynos_tmu.c
>>>  create mode 100644 drivers/thermal/samsung/exynos_tmu.h
>>>  create mode 100644 drivers/thermal/samsung/exynos_tmu_data.c
>>>  create mode 100644 drivers/thermal/samsung/exynos_tmu_data.h
>>>  delete mode 100644 include/linux/platform_data/exynos_thermal.h
>>>
>>>
>>>
>>
>>
> 
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]