Re: [PATCH 2/2] regulator: palmas: model SMPS10 as two regulators

[Kishon Vijay Abraham I <kishon@ti.com>]

Hi,

On Saturday 22 June 2013 06:42 PM, Laxman Dewangan wrote:
> On Friday 21 June 2013 07:30 PM, Kishon Vijay Abraham I wrote:
>> On Friday 21 June 2013 06:55 PM, Laxman Dewangan wrote:
>>> On Thursday 20 June 2013 08:56 PM, Kishon Vijay Abraham I wrote:
>>>> Hi,
>>>>
>>>> On Thursday 20 June 2013 08:14 PM, Laxman Dewangan wrote:
>>>>> Have you added the regulator supply entries?
>>>>> Are you testing on mainline linux-next?
>>>> Not in linux-next :-( Tested only with mainline.
>>>> Does inverting the order helps?
>>>>
>>> I think because you do not have entry of supply in your dt node, it gets
>>> ignored by regulator_dev_lookup() and continue.
>>>
>>> I made the entry like (added entry form smps10-out2-supply and smps10-in-supply
>>> in dt node) and then it failed.
>>> /***
>>>
>>> +                           smps10-out2-supply = <&palmas_smps10_out2_reg>;
>>> +                           smps10-in-supply = <&tps65090_dcdc3_reg>;
>>>                               ldo3-in-supply = <&palmas_smps3_reg>;
>>> @@ -903,6 +905,20 @@
>>>                                           regulator-always-on;
>>>                                   };
>>>
>>> +                               palmas_smps10_out1_reg: smps10_out1 {
>>> +                                       regulator-name = "smps10_out1";
>>> +                                       regulator-min-microvolt = <5000000>;
>>> +                                       regulator-max-microvolt = <5000000>;
>>> +                                       regulator-always-on;
>>> +                               };
>>> +
>>> +                               palmas_smps10_out2_reg: smps10_out2 {
>>> +                                       regulator-name = "smps10_out2";
>>> +                                       regulator-min-microvolt = <5000000>;
>>> +                                       regulator-max-microvolt = <5000000>;
>>> +                                       regulator-always-on;
>>> +                               };
>>> +
>>> **/
>>>
>>>
>>> After reversing the sequence, it worked fine.
>> You mean, changing the order in dt node helped?
>
> The sequence on DT does not matter. We register the regulators in the sequence
> it is having enums value for regulator-id in loop. So we need to revert there.
>
> Yaah, it looks odd that SMPS10-OUT2come before SMPS10-OUT1 in enums definition.

Will fix that and send a patch.

Thanks
Kishon