* [PATCH] clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
@ 2013-06-17 22:47 Soren Brinkmann
2013-06-24 15:58 ` Sören Brinkmann
0 siblings, 1 reply; 3+ messages in thread
From: Soren Brinkmann @ 2013-06-17 22:47 UTC (permalink / raw)
To: Michal Simek, Mike Turquette
Cc: linux-kernel, linux-arm-kernel, Soren Brinkmann
Zynq's Ethernet clocks are created by the following hierarchy:
mux0 ---> div0 ---> div1 ---> mux1 ---> gate
Rate change requests on the gate have to propagate all the way up to
div0 to properly leverage all dividers. Mux1 was missing the
CLK_SET_RATE_PARENT flag, which is required to achieve this.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
drivers/clk/zynq/clkc.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 515a573..089d3e3 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -365,8 +365,9 @@ static void __init zynq_clk_setup(struct device_node *np)
CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&gem0clk_lock);
- clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0,
- SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock);
+ clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2,
+ CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 6, 1, 0,
+ &gem0clk_lock);
clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0],
"gem0_emio_mux", CLK_SET_RATE_PARENT,
SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock);
@@ -387,8 +388,9 @@ static void __init zynq_clk_setup(struct device_node *np)
CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&gem1clk_lock);
- clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0,
- SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock);
+ clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2,
+ CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 6, 1, 0,
+ &gem1clk_lock);
clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1],
"gem1_emio_mux", CLK_SET_RATE_PARENT,
SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
2013-06-17 22:47 [PATCH] clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes Soren Brinkmann
@ 2013-06-24 15:58 ` Sören Brinkmann
2013-06-26 9:57 ` Michal Simek
0 siblings, 1 reply; 3+ messages in thread
From: Sören Brinkmann @ 2013-06-24 15:58 UTC (permalink / raw)
To: Michal Simek, Mike Turquette; +Cc: linux-kernel, linux-arm-kernel
ping?
On Mon, Jun 17, 2013 at 03:47:40PM -0700, Soren Brinkmann wrote:
> Zynq's Ethernet clocks are created by the following hierarchy:
> mux0 ---> div0 ---> div1 ---> mux1 ---> gate
> Rate change requests on the gate have to propagate all the way up to
> div0 to properly leverage all dividers. Mux1 was missing the
> CLK_SET_RATE_PARENT flag, which is required to achieve this.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> ---
> drivers/clk/zynq/clkc.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
> index 515a573..089d3e3 100644
> --- a/drivers/clk/zynq/clkc.c
> +++ b/drivers/clk/zynq/clkc.c
> @@ -365,8 +365,9 @@ static void __init zynq_clk_setup(struct device_node *np)
> CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6,
> CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
> &gem0clk_lock);
> - clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0,
> - SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock);
> + clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2,
> + CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 6, 1, 0,
> + &gem0clk_lock);
> clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0],
> "gem0_emio_mux", CLK_SET_RATE_PARENT,
> SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock);
> @@ -387,8 +388,9 @@ static void __init zynq_clk_setup(struct device_node *np)
> CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6,
> CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
> &gem1clk_lock);
> - clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0,
> - SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock);
> + clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2,
> + CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 6, 1, 0,
> + &gem1clk_lock);
> clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1],
> "gem1_emio_mux", CLK_SET_RATE_PARENT,
> SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
> --
> 1.8.3.1
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
2013-06-24 15:58 ` Sören Brinkmann
@ 2013-06-26 9:57 ` Michal Simek
0 siblings, 0 replies; 3+ messages in thread
From: Michal Simek @ 2013-06-26 9:57 UTC (permalink / raw)
To: Sören Brinkmann
Cc: Michal Simek, Mike Turquette, linux-kernel, linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 2496 bytes --]
On 06/24/2013 05:58 PM, Sören Brinkmann wrote:
> ping?
>
> On Mon, Jun 17, 2013 at 03:47:40PM -0700, Soren Brinkmann wrote:
>> Zynq's Ethernet clocks are created by the following hierarchy:
>> mux0 ---> div0 ---> div1 ---> mux1 ---> gate
>> Rate change requests on the gate have to propagate all the way up to
>> div0 to properly leverage all dividers. Mux1 was missing the
>> CLK_SET_RATE_PARENT flag, which is required to achieve this.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> ---
>> drivers/clk/zynq/clkc.c | 10 ++++++----
>> 1 file changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
>> index 515a573..089d3e3 100644
>> --- a/drivers/clk/zynq/clkc.c
>> +++ b/drivers/clk/zynq/clkc.c
>> @@ -365,8 +365,9 @@ static void __init zynq_clk_setup(struct device_node *np)
>> CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6,
>> CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
>> &gem0clk_lock);
>> - clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0,
>> - SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock);
>> + clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2,
>> + CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 6, 1, 0,
>> + &gem0clk_lock);
>> clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0],
>> "gem0_emio_mux", CLK_SET_RATE_PARENT,
>> SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock);
>> @@ -387,8 +388,9 @@ static void __init zynq_clk_setup(struct device_node *np)
>> CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6,
>> CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
>> &gem1clk_lock);
>> - clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0,
>> - SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock);
>> + clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2,
>> + CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 6, 1, 0,
>> + &gem1clk_lock);
>> clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1],
>> "gem1_emio_mux", CLK_SET_RATE_PARENT,
>> SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
>> --
>> 1.8.3.1
>>
Applied.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-06-26 9:57 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-17 22:47 [PATCH] clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes Soren Brinkmann
2013-06-24 15:58 ` Sören Brinkmann
2013-06-26 9:57 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox