* [PATCH 5/9] cciss: rework pci pm related code for simplification
@ 2013-06-18 8:19 Yijing Wang
2013-07-02 1:48 ` Yijing Wang
0 siblings, 1 reply; 6+ messages in thread
From: Yijing Wang @ 2013-06-18 8:19 UTC (permalink / raw)
To: Jens Axboe, Mike Miller
Cc: linux-kernel, Hanjun Guo, jiang.liu, Yijing Wang, iss_storagedev
Use pci core pm interface to simplify code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: iss_storagedev@hp.com
Cc: linux-kernel@vger.kernel.org
---
drivers/block/cciss.c | 16 +++-------------
1 files changed, 3 insertions(+), 13 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 62b6c2c..18da685 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4528,9 +4528,6 @@ static int cciss_message(struct pci_dev *pdev, unsigned char opcode,
static int cciss_controller_hard_reset(struct pci_dev *pdev,
void * __iomem vaddr, u32 use_doorbell)
{
- u16 pmcsr;
- int pos;
-
if (use_doorbell) {
/* For everything after the P600, the PCI power state method
* of resetting the controller doesn't work, so we have this
@@ -4548,8 +4545,7 @@ static int cciss_controller_hard_reset(struct pci_dev *pdev,
* this causes a secondary PCI reset which will reset the
* controller." */
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
+ if (!pdev->pm_cap) {
dev_err(&pdev->dev,
"cciss_controller_hard_reset: "
"PCI PM not supported\n");
@@ -4557,18 +4553,12 @@ static int cciss_controller_hard_reset(struct pci_dev *pdev,
}
dev_info(&pdev->dev, "using PCI PM to reset controller\n");
/* enter the D3hot power management state */
- pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D3hot;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ pci_set_power_state(pdev, PCI_D3hot);
msleep(500);
/* enter the D0 power management state */
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D0;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
-
+ pci_set_power_state(pdev, PCI_D0);
/*
* The P600 requires a small delay when changing states.
* Otherwise we may think the board did not reset and we bail.
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 5/9] cciss: rework pci pm related code for simplification
2013-06-18 8:19 [PATCH 5/9] cciss: rework pci pm related code for simplification Yijing Wang
@ 2013-07-02 1:48 ` Yijing Wang
2013-07-02 8:02 ` Jens Axboe
0 siblings, 1 reply; 6+ messages in thread
From: Yijing Wang @ 2013-07-02 1:48 UTC (permalink / raw)
To: Yijing Wang
Cc: Jens Axboe, Mike Miller, linux-kernel, Jiri Kosina,
iss_storagedev
Hi Jens,
Sorry to disturb you, do you have any comments for this patch?
Thanks!
Yijing.
On 2013/6/18 16:19, Yijing Wang wrote:
> Use pci core pm interface to simplify code.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Cc: Mike Miller <mike.miller@hp.com>
> Cc: iss_storagedev@hp.com
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/block/cciss.c | 16 +++-------------
> 1 files changed, 3 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
> index 62b6c2c..18da685 100644
> --- a/drivers/block/cciss.c
> +++ b/drivers/block/cciss.c
> @@ -4528,9 +4528,6 @@ static int cciss_message(struct pci_dev *pdev, unsigned char opcode,
> static int cciss_controller_hard_reset(struct pci_dev *pdev,
> void * __iomem vaddr, u32 use_doorbell)
> {
> - u16 pmcsr;
> - int pos;
> -
> if (use_doorbell) {
> /* For everything after the P600, the PCI power state method
> * of resetting the controller doesn't work, so we have this
> @@ -4548,8 +4545,7 @@ static int cciss_controller_hard_reset(struct pci_dev *pdev,
> * this causes a secondary PCI reset which will reset the
> * controller." */
>
> - pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
> - if (pos == 0) {
> + if (!pdev->pm_cap) {
> dev_err(&pdev->dev,
> "cciss_controller_hard_reset: "
> "PCI PM not supported\n");
> @@ -4557,18 +4553,12 @@ static int cciss_controller_hard_reset(struct pci_dev *pdev,
> }
> dev_info(&pdev->dev, "using PCI PM to reset controller\n");
> /* enter the D3hot power management state */
> - pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
> - pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
> - pmcsr |= PCI_D3hot;
> - pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
> + pci_set_power_state(pdev, PCI_D3hot);
>
> msleep(500);
>
> /* enter the D0 power management state */
> - pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
> - pmcsr |= PCI_D0;
> - pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
> -
> + pci_set_power_state(pdev, PCI_D0);
> /*
> * The P600 requires a small delay when changing states.
> * Otherwise we may think the board did not reset and we bail.
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 5/9] cciss: rework pci pm related code for simplification
2013-07-02 1:48 ` Yijing Wang
@ 2013-07-02 8:02 ` Jens Axboe
2013-07-02 8:10 ` Yijing Wang
2013-07-02 8:15 ` Yijing Wang
0 siblings, 2 replies; 6+ messages in thread
From: Jens Axboe @ 2013-07-02 8:02 UTC (permalink / raw)
To: Yijing Wang; +Cc: Mike Miller, linux-kernel, Jiri Kosina, iss_storagedev
On Tue, Jul 02 2013, Yijing Wang wrote:
> Hi Jens,
> Sorry to disturb you, do you have any comments for this patch?
Looks fine to me, was waiting for Stephen/Mike to ack it and I'll pick
it up.
--
Jens Axboe
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 5/9] cciss: rework pci pm related code for simplification
2013-07-02 8:02 ` Jens Axboe
@ 2013-07-02 8:10 ` Yijing Wang
2013-07-02 8:18 ` Jens Axboe
2013-07-02 8:15 ` Yijing Wang
1 sibling, 1 reply; 6+ messages in thread
From: Yijing Wang @ 2013-07-02 8:10 UTC (permalink / raw)
To: Jens Axboe; +Cc: Mike Miller, linux-kernel, Jiri Kosina, iss_storagedev
On 2013/7/2 16:02, Jens Axboe wrote:
> On Tue, Jul 02 2013, Yijing Wang wrote:
>> Hi Jens,
>> Sorry to disturb you, do you have any comments for this patch?
>
> Looks fine to me, was waiting for Stephen/Mike to ack it and I'll pick
> it up.
>
Hi Jens,
Thanks for your comment, because I'm not familiar with cciss driver, so
should I cc Stephen email address ? And what is his e-mail address?
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 5/9] cciss: rework pci pm related code for simplification
2013-07-02 8:10 ` Yijing Wang
@ 2013-07-02 8:18 ` Jens Axboe
0 siblings, 0 replies; 6+ messages in thread
From: Jens Axboe @ 2013-07-02 8:18 UTC (permalink / raw)
To: Yijing Wang
Cc: Mike Miller, linux-kernel, Jiri Kosina, iss_storagedev, scameron
On Tue, Jul 02 2013, Yijing Wang wrote:
> On 2013/7/2 16:02, Jens Axboe wrote:
> > On Tue, Jul 02 2013, Yijing Wang wrote:
> >> Hi Jens,
> >> Sorry to disturb you, do you have any comments for this patch?
> >
> > Looks fine to me, was waiting for Stephen/Mike to ack it and I'll pick
> > it up.
> >
>
> Hi Jens,
> Thanks for your comment, because I'm not familiar with cciss driver, so
> should I cc Stephen email address ? And what is his e-mail address?
Now CC'ed :-)
--
Jens Axboe
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 5/9] cciss: rework pci pm related code for simplification
2013-07-02 8:02 ` Jens Axboe
2013-07-02 8:10 ` Yijing Wang
@ 2013-07-02 8:15 ` Yijing Wang
1 sibling, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-07-02 8:15 UTC (permalink / raw)
To: Jens Axboe, Stephen M. Cameron
Cc: Mike Miller, linux-kernel, Jiri Kosina, iss_storagedev
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
On 2013/7/2 16:02, Jens Axboe wrote:
> On Tue, Jul 02 2013, Yijing Wang wrote:
>> Hi Jens,
>> Sorry to disturb you, do you have any comments for this patch?
>
> Looks fine to me, was waiting for Stephen/Mike to ack it and I'll pick
> it up.
>
I find his address by git log info, thanks!
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-07-02 8:33 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-18 8:19 [PATCH 5/9] cciss: rework pci pm related code for simplification Yijing Wang
2013-07-02 1:48 ` Yijing Wang
2013-07-02 8:02 ` Jens Axboe
2013-07-02 8:10 ` Yijing Wang
2013-07-02 8:18 ` Jens Axboe
2013-07-02 8:15 ` Yijing Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).