Re: [PATCH] ARM: pxa: propagate errors from regulator_enable() to pxamci

Hein Tibosch
2013-07-08T18:46:53Z

Hi Arnd,

On 7/5/2013 11:51 PM, Arnd Bergmann wrote:
> The em_x270_mci_setpower() and em_x270_usb_hub_init() functions
> call regulator_enable(), which may return an error that must
> be checked.
>
> This changes the em_x270_usb_hub_init() function to bail out
> if it fails, and changes the pxamci_platform_data->setpower
> callback so that the a failed em_x270_mci_setpower call
> can be propagated by the pxamci driver into the mmc core.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Mike Rapoport <mike@compulab.co.il>
> Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
> Cc: Chris Ball <cjb@laptop.org>
>
> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
> index f6726bb..f8062e4 100644
> --- a/arch/arm/mach-pxa/em-x270.c
> +++ b/arch/arm/mach-pxa/em-x270.c
> @@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void)
> /* USB Hub power-on and reset */
> gpio_direction_output(usb_hub_reset, 1);
> gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
> - regulator_enable(em_x270_usb_ldo);
> + err = regulator_enable(em_x270_usb_ldo);
> + if (err)
> + goto err_free_rst_gpio;
> +
> gpio_set_value(usb_hub_reset, 0);
> gpio_set_value(usb_hub_reset, 1);
> regulator_disable(em_x270_usb_ldo);
> - regulator_enable(em_x270_usb_ldo);
> + if (err)
> + goto err_free_rst_gpio;
> +
> + err = regulator_enable(em_x270_usb_ldo);

Didn't you mean the other way around:

regulator_disable(em_x270_usb_ldo);
- regulator_enable(em_x270_usb_ldo);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+

?

Hein

> gpio_set_value(usb_hub_reset, 0);
> gpio_set_value(GPIO9_USB_VBUS_EN, 1);
>
> return 0;
>
> +err_free_rst_gpio:
> + gpio_free(usb_hub_reset);
> err_free_vbus_gpio:
> gpio_free(GPIO9_USB_VBUS_EN);
> err_free_usb_ldo:
> @@ -592,7 +600,7 @@ err_irq:
> return err;
> }
> <snip>