Re: [PATCH 5/5] usb: musb: dsps: use proper child nodes

[Sebastian Andrzej Siewior <bigeasy@linutronix.de>]

On 08/01/2013 01:30 PM, Sebastian Andrzej Siewior wrote:
> On 08/01/2013 12:52 PM, Sebastian Andrzej Siewior wrote:
>> On 08/01/2013 07:24 AM, George Cherian wrote:
>>>> b/arch/arm/boot/dts/am33xx.dtsi
>>>> index 38b446b..0f756ca 100644
>>>> --- a/arch/arm/boot/dts/am33xx.dtsi
>>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>>>> @@ -333,21 +337,85 @@
>>>>               status = "disabled";
>>>>           };
>>>>   -        usb@47400000 {
>>>> -            compatible = "ti,musb-am33xx";
>>>> -            reg = <0x47400000 0x1000    /* usbss */
>>>> -                   0x47401000 0x800        /* musb instance 0 */
>>>> -                   0x47401800 0x800>;    /* musb instance 1 */
>>>> -            interrupts = <17        /* usbss */
>>>> -                      18        /* musb instance 0 */
>>>> -                      19>;        /* musb instance 1 */
>>>> -            multipoint = <1>;
>>>> -            num-eps = <16>;
>>>> -            ram-bits = <12>;
>>>> -            port0-mode = <3>;
>>>> -            port1-mode = <3>;
>>>> -            power = <250>;
>>>> +        usb: usb@47400000 {
>>>> +            compatible = "ti,am33xx-usb";
>>>> +            reg = <0x47400000 0x1000>;
>>>> +            ranges;
>>>> +            #address-cells = <1>;
>>>> +            #size-cells = <1>;
>>>>               ti,hwmods = "usb_otg_hs";
>>>> +            status = "disabled";
>>>> +
>>>> +            ctrl_mod: control@44e10000 {
>>>> +                compatible = "ti,am335x-ctrl-module";
>>>> +                reg = <0x44e10000 0x650>;
>>>
>>> Do you really need to map Control Module base to 0x650? If some other
>>> driver does this mapping
>>
>> This is what I cam currently not sure about. Either we minimize the
>> register window and introduce two (the other wakeup) or we keep using
>> the same reset driver for other devices.
> 
> I mean drivers/reset or something like that.

If there are no further comments / preferences on this I'm going to
shrink to registers and make usb only.

> 
Sebastian