From: George Cherian <george.cherian@ti.com>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <linux-usb@vger.kernel.org>, <balbi@ti.com>,
<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 5/5] usb: musb: dsps: use proper child nodes
Date: Fri, 2 Aug 2013 20:19:27 +0530 [thread overview]
Message-ID: <51FBC6F7.7050509@ti.com> (raw)
In-Reply-To: <51FB8A14.8040008@linutronix.de>
On 8/2/2013 3:59 PM, Sebastian Andrzej Siewior wrote:
> On 08/01/2013 01:30 PM, Sebastian Andrzej Siewior wrote:
>> On 08/01/2013 12:52 PM, Sebastian Andrzej Siewior wrote:
>>> On 08/01/2013 07:24 AM, George Cherian wrote:
>>>>> b/arch/arm/boot/dts/am33xx.dtsi
>>>>> index 38b446b..0f756ca 100644
>>>>> --- a/arch/arm/boot/dts/am33xx.dtsi
>>>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>>>>> @@ -333,21 +337,85 @@
>>>>> status = "disabled";
>>>>> };
>>>>> - usb@47400000 {
>>>>> - compatible = "ti,musb-am33xx";
>>>>> - reg = <0x47400000 0x1000 /* usbss */
>>>>> - 0x47401000 0x800 /* musb instance 0 */
>>>>> - 0x47401800 0x800>; /* musb instance 1 */
>>>>> - interrupts = <17 /* usbss */
>>>>> - 18 /* musb instance 0 */
>>>>> - 19>; /* musb instance 1 */
>>>>> - multipoint = <1>;
>>>>> - num-eps = <16>;
>>>>> - ram-bits = <12>;
>>>>> - port0-mode = <3>;
>>>>> - port1-mode = <3>;
>>>>> - power = <250>;
>>>>> + usb: usb@47400000 {
>>>>> + compatible = "ti,am33xx-usb";
>>>>> + reg = <0x47400000 0x1000>;
>>>>> + ranges;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <1>;
>>>>> ti,hwmods = "usb_otg_hs";
>>>>> + status = "disabled";
>>>>> +
>>>>> + ctrl_mod: control@44e10000 {
>>>>> + compatible = "ti,am335x-ctrl-module";
>>>>> + reg = <0x44e10000 0x650>;
>>>> Do you really need to map Control Module base to 0x650? If some other
>>>> driver does this mapping
>>> This is what I cam currently not sure about. Either we minimize the
>>> register window and introduce two (the other wakeup) or we keep using
>>> the same reset driver for other devices.
>> I mean drivers/reset or something like that.
> If there are no further comments / preferences on this I'm going to
> shrink to registers and make usb only.
Yes, USB only makes sense for now.
>
> Sebastian
>
--
-George
prev parent reply other threads:[~2013-08-02 14:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-30 20:16 am335x, multi instance and phy support, v3 Sebastian Andrzej Siewior
2013-07-30 20:16 ` [PATCH 1/5] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv Sebastian Andrzej Siewior
2013-07-30 20:16 ` [PATCH 2/5] usb: phy: phy-generic: export init functions Sebastian Andrzej Siewior
2013-07-30 20:16 ` [PATCH 3/5] usb: phy: Add AM335x PHY driver Sebastian Andrzej Siewior
2013-08-01 5:36 ` George Cherian
2013-08-01 10:55 ` Sebastian Andrzej Siewior
2013-07-30 20:16 ` [PATCH 4/5] usb: musb: dsps: remove the hardcoded phy pieces Sebastian Andrzej Siewior
2013-07-30 20:16 ` [PATCH 5/5] usb: musb: dsps: use proper child nodes Sebastian Andrzej Siewior
2013-08-01 5:24 ` George Cherian
2013-08-01 10:52 ` Sebastian Andrzej Siewior
2013-08-01 11:30 ` Sebastian Andrzej Siewior
2013-08-02 10:29 ` Sebastian Andrzej Siewior
2013-08-02 14:49 ` George Cherian [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51FBC6F7.7050509@ti.com \
--to=george.cherian@ti.com \
--cc=balbi@ti.com \
--cc=bigeasy@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox