[PATCH] arm: omap5: dts: split SMPS10 dt node

Kishon Vijay Abraham I
2013-08-12T09:37:51Z

SMPS10 has two outputs OUT1 and OUT2. Hence SMPS10 is modeled as
two regulators. The dt node is split to reflect it.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 65d7b60..05b9b12 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -334,9 +334,18 @@
ti,smps-range = <0x80>;
};

- smps10_reg: smps10 {
+ smps10_out2_reg: smps10_out2 {
/* VBUS_5V_OTG */
- regulator-name = "smps10";
+ regulator-name = "smps10_out2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps10_out1_reg: smps10_out1 {
+ /* VBUS_5V_OTG */
+ regulator-name = "smps10_out1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
--
1.7.10.4