public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: George Cherian <george.cherian@ti.com>
Cc: balbi@ti.com, myungjoo.ham@samsung.com, cw00.choi@samsung.com,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, grant.likely@linaro.org,
	rob@landley.net, ian.campbell@citrix.com, swarren@wwwdotorg.org,
	mark.rutland@arm.com, pawel.moll@arm.com,
	rob.herring@calxeda.com, linux-omap@vger.kernel.org,
	linux-usb@vger.kernel.org, bcousson@baylibre.com,
	davidb@codeaurora.org, arnd@arndb.de, swarren@nvidia.com,
	popcornmix@gmail.com
Subject: Re: [PATCH v2 3/3] ARM: dts: dra7-evm: Add extcon nodes for USB ID pin detection
Date: Wed, 28 Aug 2013 18:40:38 +0400	[thread overview]
Message-ID: <521E0BE6.3080607@cogentembedded.com> (raw)
In-Reply-To: <1377698352-27689-4-git-send-email-george.cherian@ti.com>

Hello.

On 08/28/2013 05:59 PM, George Cherian wrote:

> Add
> 	-extcon nodes for USB ID pin detection.
> 	-i2c nodes.
> 	-pcf nodes to which USB ID pin is connected.

> Signed-off-by: George Cherian <george.cherian@ti.com>
> ---
>   arch/arm/boot/dts/dra7-evm.dts | 52 +++++++++++++++++++++++++++++++++++++++++-
>   1 file changed, 51 insertions(+), 1 deletion(-)

> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index acd3c09..9ee97c0 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -17,6 +17,17 @@
>   		device_type = "memory";
>   		reg = <0x80000000 0x60000000>; /* 1536 MB */
>   	};
> +
> +	extcon1: gpio_usbvid_extcon1 {
> +		compatible = "ti,gpio-usb-id";
> +		gpios = <&pcf_21 1 0>;
> +	};
> +
> +	extcon2: gpio_usbvid_extcon2 {
> +		compatible = "ti,gpio-usb-id";
> +		gpios = <&pcf_21 2 0>;
> +	};
> +
>   };
>
>   &dra7_pmx_core {
> @@ -33,10 +44,49 @@
>           };
>   };
>
> +&i2c1 {
> +	clock-frequency = <400000>;
> +
> +	pcf_20: pcf8575@20 {

    Acorrding to the ePAPR spec [1], "the name of a node should be somewhat 
generic, reflecting the function of the device and not its precise 
programming model. If appropriate, the name should be one of the following 
choices:

[...]
- gpio
[...]"

> +		compatible = "ti,pcf8575";
> +		reg = <0x20>;
> +		n_latch = <0x4000>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <11 2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	pcf_21: pcf8575@21 {

    Same comment here.

> +		compatible = "ti,pcf8575";
> +		reg = <0x21>;
> +		n_latch = <0x1408>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&pcf_20>;
> +		interrupts = <14 2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +};
> +

[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf

WBR, Sergei


  reply	other threads:[~2013-08-28 14:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-28 13:59 [PATCH v2 0/3] Add Generic USB VBUS/ID detection via GPIO using extcon George Cherian
2013-08-28 13:59 ` [PATCH v2 1/3] extcon: extcon-gpio-usbvid: Generic USB VBUS/ID detection via GPIO George Cherian
2013-08-28 13:59 ` [PATCH v2 2/3] drivers: Makefile: Extcon is a framework so bump it up George Cherian
2013-08-28 13:59 ` [PATCH v2 3/3] ARM: dts: dra7-evm: Add extcon nodes for USB ID pin detection George Cherian
2013-08-28 14:40   ` Sergei Shtylyov [this message]
2013-08-28 17:35 ` [PATCH v2 0/3] Add Generic USB VBUS/ID detection via GPIO using extcon George Cherian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=521E0BE6.3080607@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=arnd@arndb.de \
    --cc=balbi@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=cw00.choi@samsung.com \
    --cc=davidb@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=george.cherian@ti.com \
    --cc=grant.likely@linaro.org \
    --cc=ian.campbell@citrix.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=pawel.moll@arm.com \
    --cc=popcornmix@gmail.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=swarren@nvidia.com \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox