From: Chris Rodley <chris@snapithd.com>
To: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Cc: kernel@savoirfairelinux.com, linux-kernel@vger.kernel.org,
lm-sensors@lm-sensors.org
Subject: Re: sht15 kernel driver
Date: Fri, 30 Aug 2013 09:58:10 +1200 [thread overview]
Message-ID: <521FC3F2.5030504@snapithd.com> (raw)
In-Reply-To: <87ppswh75z.fsf@jerows.sfl>
On 30/08/13 03:02, Jerome Oufella wrote:
> Chris Rodley <chris@snapithd.com> writes:
>> Thanks Jerome!
>>
>> That was just what I needed to know.
>> The device is now set up and is working well - I will have a go at
>> back porting now.
>>
>> Many thanks again for your help!
>> Chris
> Good to know Chris!
>
> Note, we noticed that the sht15 driver may be sensible to noisy lines,
> we suspect a race condition around the interrupt handling code.
>
> If your sensor is populated on the board you shouldn't have problems
> though.
>
> Jerome
Hi,
We have it working really well .. not noticing any issues - so far at least.
It is being populated more or less directly on the board - just via a
daughter board in the prototype phase.
So I might not see the same issues.
If we find anything I will submit it back to you.
Many thanks again for your advice!
Chris
prev parent reply other threads:[~2013-08-29 21:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <521E7CA7.5060407@snapithd.com>
2013-08-28 23:08 ` sht15 kernel driver Jerome Oufella
2013-08-29 3:18 ` Chris Rodley
2013-08-29 15:02 ` Jerome Oufella
2013-08-29 15:28 ` [lm-sensors] " Guenter Roeck
2013-08-29 21:58 ` Chris Rodley [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=521FC3F2.5030504@snapithd.com \
--to=chris@snapithd.com \
--cc=jerome.oufella@savoirfairelinux.com \
--cc=kernel@savoirfairelinux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox