Re: [PATCH v2 1/6] host1x: hdmi: Add Tegra114 support

[Stephen Warren <swarren@wwwdotorg.org>]

On 08/28/2013 09:48 AM, Mikko Perttunen wrote:
> Add Tegra114 TMDS configuration, add new peak_current field and
> use new place for drive current override bit on Tegra114 platform.

> diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c

>  static struct of_device_id host1x_of_match[] = {
> +	{ .compatible = "nvidia,tegra114-host1x", .data = &host1x01_info, },

We should add that value to the host1x DT binding documentation.

> diff --git a/drivers/gpu/host1x/drm/hdmi.c b/drivers/gpu/host1x/drm/hdmi.c

>  static const struct tegra_hdmi_audio_config *
>  tegra_hdmi_get_audio_config(unsigned int audio_freq, unsigned int pclk)
>  {
> @@ -593,8 +673,20 @@ static void tegra_hdmi_setup_tmds(struct tegra_hdmi *hdmi,
>  	tegra_hdmi_writel(hdmi, tmds->pll1, HDMI_NV_PDISP_SOR_PLL1);
>  	tegra_hdmi_writel(hdmi, tmds->pe_current, HDMI_NV_PDISP_PE_CURRENT);
>  
> -	value = tmds->drive_current | DRIVE_CURRENT_FUSE_OVERRIDE;
> -	tegra_hdmi_writel(hdmi, value, HDMI_NV_PDISP_SOR_LANE_DRIVE_CURRENT);
> +	if (of_device_is_compatible(hdmi->dev->of_node,
> +		"nvidia,tegra114-hdmi")) {

We shouldn't do this at run-time. Rather, set tegra_hdmi_of_match[]'s
.data field to a structure that represents the various features of the
HW, and then make this code conditional upon a feature flag in that
structure.