From: Yijing Wang <wangyijing@huawei.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Gavin Shan <shangw@linux.vnet.ibm.com>,
"James E.J. Bottomley" <JBottomley@parallels.com>,
"David S. Miller" <davem@davemloft.net>,
<linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
Hanjun Guo <guohanjun@huawei.com>,
Jiang Liu <jiang.liu@huawei.com>,
Naresh Kumar Inna <naresh@chelsio.com>,
Jesper Juhl <jj@chaosbits.net>, <linux-scsi@vger.kernel.org>
Subject: Re: [PATCH 2/7] scsi/csiostor: use pcie_capability_xxx to simplify code
Date: Thu, 5 Sep 2013 15:37:07 +0800 [thread overview]
Message-ID: <522834A3.5030506@huawei.com> (raw)
In-Reply-To: <20130903234328.GC24733@google.com>
On 2013/9/4 7:43, Bjorn Helgaas wrote:
> On Tue, Sep 03, 2013 at 03:35:10PM +0800, Yijing Wang wrote:
>> Pcie_capability_xxx() interfaces were introudced to
>
> s/introudced/introduced/
Will update it.
>
>> simplify code to access PCIe Cap config space. And
>> because PCI core saves the PCIe Cap offset in
>> set_pcie_port_type() when device is enumerated.
>> So we can use pci_is_pcie() instead.
>>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> Cc: Jiang Liu <jiang.liu@huawei.com>
>> Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
>> Cc: Naresh Kumar Inna <naresh@chelsio.com>
>> Cc: "David S. Miller" <davem@davemloft.net>
>> Cc: Jesper Juhl <jj@chaosbits.net>
>> Cc: linux-scsi@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>> drivers/scsi/csiostor/csio_hw.c | 9 +++------
>> 1 files changed, 3 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
>> index 0eb35b9..be9a6ef 100644
>> --- a/drivers/scsi/csiostor/csio_hw.c
>> +++ b/drivers/scsi/csiostor/csio_hw.c
>> @@ -856,15 +856,12 @@ static void
>> csio_set_pcie_completion_timeout(struct csio_hw *hw, u8 range)
>> {
>> uint16_t val;
>> - int pcie_cap;
>>
>> - if (!csio_pci_capability(hw->pdev, PCI_CAP_ID_EXP, &pcie_cap)) {
>> - pci_read_config_word(hw->pdev,
>> - pcie_cap + PCI_EXP_DEVCTL2, &val);
>> + if (pci_is_pcie(hw->pdev)) {
>> + pcie_capability_read_word(hw->pdev, PCI_EXP_DEVCTL2, &val);
>> val &= 0xfff0;
>> val |= range ;
>> - pci_write_config_word(hw->pdev,
>> - pcie_cap + PCI_EXP_DEVCTL2, val);
>> + pcie_capability_write_word(hw->pdev, PCI_EXP_DEVCTL2, val);
>
> Please add a #define for the Completion Timeout Value field and use
> pcie_capability_clear_and_set_word() instead of writing it out the
> long way here.
Will update it, thanks!
>
>> }
>> }
>>
>> --
>> 1.7.1
>>
>>
>
> .
>
--
Thanks!
Yijing
next prev parent reply other threads:[~2013-09-05 7:38 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-03 7:35 [PATCH 1/7] scsi/bfa: use pcie_capability_xxx to simplify code Yijing Wang
2013-09-03 7:35 ` [PATCH 2/7] scsi/csiostor: " Yijing Wang
2013-09-03 23:43 ` Bjorn Helgaas
2013-09-05 7:37 ` Yijing Wang [this message]
2013-09-03 7:35 ` [PATCH 3/7] powerpc/pci: use pci_is_pcie() " Yijing Wang
2013-09-04 21:07 ` Kumar Gala
2013-09-03 7:35 ` [PATCH 4/7] x86/pci: use pcie_cap " Yijing Wang
2013-09-04 2:59 ` Bjorn Helgaas
2013-09-05 6:34 ` Yijing Wang
2013-09-03 7:35 ` [PATCH 5/7] ixgbe: use pcie_capability_read_word() " Yijing Wang
2013-09-04 9:26 ` [E1000-devel] " Jeff Kirsher
2013-09-04 16:20 ` Bjorn Helgaas
2013-09-04 17:24 ` Keller, Jacob E
2013-09-03 7:35 ` [PATCH 6/7] PCI: use pci_is_pcie() " Yijing Wang
2013-09-03 7:35 ` [PATCH 7/7] scsi/qla2xxx: use pcie_is_pcie() " Yijing Wang
2013-09-03 20:18 ` Chad Dupuis
2013-09-03 23:34 ` [PATCH 1/7] scsi/bfa: use pcie_capability_xxx " Bjorn Helgaas
2013-09-04 2:37 ` Bjorn Helgaas
2013-09-05 7:21 ` Yijing Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=522834A3.5030506@huawei.com \
--to=wangyijing@huawei.com \
--cc=JBottomley@parallels.com \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=guohanjun@huawei.com \
--cc=jiang.liu@huawei.com \
--cc=jj@chaosbits.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=naresh@chelsio.com \
--cc=shangw@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox