From: "David Ford" <firefighterblu3@gmail.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [it really is text/plain :P] dual port onboard 82546EB checksum errors
Date: Thu, 19 Apr 2007 17:06:08 -0400 [thread overview]
Message-ID: <523e55a00704191406s4442e32aw5f82bbe21affe2b8@mail.gmail.com> (raw)
I have a rackmount server that has a dual port onboard 82546EB card.
I've googled and seen this card apparently active with other users but
I seem to only get checksum errors.
[ 0.194129] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 0.194234] Copyright (c) 1999-2006 Intel Corporation.
[ 0.194405] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 51 (level,
low) -> IRQ 16
[ 0.458732] e1000: 0000:04:09.0: e1000_probe: (PCI:66MHz:64-bit)
00:04:23:cd:93:d2
[ 0.489766] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 0.489889] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level,
low) -> IRQ 17
[ 0.721071] e1000: 0000:03:07.0: e1000_probe: The EEPROM Checksum
Is Not Valid
[ 0.742509] ACPI: PCI interrupt for device 0000:03:07.0 disabled
[ 0.742614] e1000: probe of 0000:03:07.0 failed with error -5
[ 0.742731] ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level,
low) -> IRQ 18
[ 0.973865] e1000: 0000:03:07.1: e1000_probe: The EEPROM Checksum
Is Not Valid
[ 0.995304] ACPI: PCI interrupt for device 0000:03:07.1 disabled
[ 0.995405] e1000: probe of 0000:03:07.1 failed with error -5
03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) (rev 01)
03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) (rev 01)
04: 09.0 Ethernet controller: Intel Corporation 82545GM Gigabit
Ethernet Controller (rev 04)
03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) (rev 01)
Subsystem: Intel Corporation Unknown device 341a
Flags: 66MHz, medium devsel, IRQ 17
Memory at fe5c0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at 2040 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) (rev 01)
Subsystem: Intel Corporation Unknown device 341a
Flags: 66MHz, medium devsel, IRQ 18
Memory at fe5e0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at 2000 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
04:09.0 Ethernet controller: Intel Corporation 82545GM Gigabit
Ethernet Controller (rev 04)
Subsystem: Intel Corporation PRO/1000 MT Server Adapter
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fe8c0000 (64-bit, non-prefetchable) [size=128K]
Memory at fe880000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 3000 [size=64]
Expansion ROM at fe840000 [disabled] [size=256K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
The 82545GM card comes up fine but the 46EB card does not.
This is 2.6.20-gentoo-r6
I'll be happy to fulfill information request if needed. Any
suggestions that'd help me get the 46EB working?
Thank you,
David
next reply other threads:[~2007-04-19 21:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-19 21:06 David Ford [this message]
2007-04-19 22:05 ` [it really is text/plain :P] dual port onboard 82546EB checksum errors Jesse Brandeburg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=523e55a00704191406s4442e32aw5f82bbe21affe2b8@mail.gmail.com \
--to=firefighterblu3@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox