Re: [PATCH v2] vsprintf: Check real user/group id for %pK

[Ryan Mallon <rmallon@gmail.com>]

On 09/10/13 13:00, Joe Perches wrote:
> On Wed, 2013-10-09 at 12:55 +1100, Ryan Mallon wrote:
>> On 09/10/13 12:30, Joe Perches wrote:
>>> On Tue, 2013-10-08 at 17:49 -0700, Joe Perches wrote:
>>>> On Wed, 2013-10-09 at 11:15 +1100, Ryan Mallon wrote:
>>>>> Some setuid binaries will allow reading of files which have read
>>>>> permission by the real user id. This is problematic with files which
>>>>> use %pK because the file access permission is checked at open() time,
>>>>> but the kptr_restrict setting is checked at read() time. If a setuid
>>>>> binary opens a %pK file as an unprivileged user, and then elevates
>>>>> permissions before reading the file, then kernel pointer values may be
>>>>> leaked.
>>>> I think it should explicitly test 0.
>>> Also, Documentation/sysctl/kernel.txt should be updated too.
>>>
>>> Here's a suggested patch:
>>>
>>> ---
>>>  Documentation/sysctl/kernel.txt | 14 ++++++++------
>>>  lib/vsprintf.c                  | 38 ++++++++++++++++++++++++++------------
>>>  2 files changed, 34 insertions(+), 18 deletions(-)
>>>
>>> diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
>>> index 9d4c1d1..eac53d5 100644
>>> --- a/Documentation/sysctl/kernel.txt
>>> +++ b/Documentation/sysctl/kernel.txt
>>> @@ -290,13 +290,15 @@ Default value is "/sbin/hotplug".
>>>  kptr_restrict:
>>>  
>>>  This toggle indicates whether restrictions are placed on
>>> -exposing kernel addresses via /proc and other interfaces.  When
>>> -kptr_restrict is set to (0), there are no restrictions.  When
>>> -kptr_restrict is set to (1), the default, kernel pointers
>>> +exposing kernel addresses via /proc and other interfaces.
>>> +
>>> +When kptr_restrict is set to (0), there are no restrictions.
>>> +When kptr_restrict is set to (1), the default, kernel pointers
>>>  printed using the %pK format specifier will be replaced with 0's
>>> -unless the user has CAP_SYSLOG.  When kptr_restrict is set to
>>> -(2), kernel pointers printed using %pK will be replaced with 0's
>>> -regardless of privileges.
>>> +unless the user has CAP_SYSLOG and effective user and group ids
>>> +are equal to the real ids.
>>> +When kptr_restrict is set to (2), kernel pointers printed using
>>> +%pK will be replaced with 0's regardless of privileges.
>> I'll add this, thanks.
>>
>> I'm less fussed about the suggestions for the logic. The current test is
>> small and concise.
> The logic ends up the same to the compiler, but it's
> human readers that want simple and clear.
>
>> The original also does the in_irq tests regardless of
>> the kptr_restrict setting since they are mostly intended to catch
>> internal kernel bugs.
> Not so.
>
> http://marc.info/?l=linux-security-module&m=129303800912245&w=4
> https://lkml.org/lkml/2012/7/13/428
>

Ah, I misread it. It does however check when kptr_restrict != 0, not
just when kptr_restrict is 1. I've left the in_irq test as-is, but used
a switch as suggested. I don't really care either way, I think the
original check is quite readable. Anyway, updated patch below:

~Ryan

---

diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 9d4c1d1..eac53d5 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -290,13 +290,15 @@ Default value is "/sbin/hotplug".
 kptr_restrict:
 
 This toggle indicates whether restrictions are placed on
-exposing kernel addresses via /proc and other interfaces.  When
-kptr_restrict is set to (0), there are no restrictions.  When
-kptr_restrict is set to (1), the default, kernel pointers
+exposing kernel addresses via /proc and other interfaces.
+
+When kptr_restrict is set to (0), there are no restrictions.
+When kptr_restrict is set to (1), the default, kernel pointers
 printed using the %pK format specifier will be replaced with 0's
-unless the user has CAP_SYSLOG.  When kptr_restrict is set to
-(2), kernel pointers printed using %pK will be replaced with 0's
-regardless of privileges.
+unless the user has CAP_SYSLOG and effective user and group ids
+are equal to the real ids.
+When kptr_restrict is set to (2), kernel pointers printed using
+%pK will be replaced with 0's regardless of privileges.
 
 ==============================================================
 
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 26559bd..6dd8c5d 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -27,6 +27,7 @@
 #include <linux/uaccess.h>
 #include <linux/ioport.h>
 #include <linux/dcache.h>
+#include <linux/cred.h>
 #include <net/addrconf.h>
 
 #include <asm/page.h>		/* for PAGE_SIZE */
@@ -1312,11 +1313,36 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr,
 				spec.field_width = default_width;
 			return string(buf, end, "pK-error", spec);
 		}
-		if (!((kptr_restrict == 0) ||
-		      (kptr_restrict == 1 &&
-		       has_capability_noaudit(current, CAP_SYSLOG))))
+
+		switch (kptr_restrict) {
+		case 0:
+			/* Always print %pK values */
+			break;
+		case 1: {
+			/*
+			 * Only print the real pointer value if the current
+			 * proccess has CAP_SYSLOG and is running with the
+			 * same credentials it started with. This is because
+			 * access to files is checked at open() time, but %pK
+			 * checks permission at read() time. We don't want to
+			 * leak pointer values if a binary opens a file using
+			 * %pK and then elevates privileges before reading it.
+			 */
+			const struct cred *cred = current_cred();
+
+			if (!has_capability_noaudit(current, CAP_SYSLOG) ||
+			    !uid_eq(cred->euid, cred->uid) ||
+			    !gid_eq(cred->egid, cred->gid))
+				ptr = NULL;
+			break;
+		}
+		default:
+			/* Always print 0's for %pK */
 			ptr = NULL;
+			break;
+		}
 		break;
+
 	case 'N':
 		switch (fmt[1]) {
 		case 'F':