[PATCH 1/2] i2c-mux-gpio: use gpio_set_value_cansleep()

[Ionut Nicu <ioan.nicu.ext@nsn.com>]

Some gpio chips may have get/set operations that
can sleep. gpio_set_value() only works for chips
which do not sleep, for the others we will get a
kernel warning. Using gpio_set_value_cansleep()
will work for both chips that do sleep and those
who don't.

Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com>
---
 drivers/i2c/muxes/i2c-mux-gpio.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index a764da7..550e094 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -30,8 +30,8 @@ static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
 	int i;
 
 	for (i = 0; i < mux->data.n_gpios; i++)
-		gpio_set_value(mux->gpio_base + mux->data.gpios[i],
-			       val & (1 << i));
+		gpio_set_value_cansleep(mux->gpio_base + mux->data.gpios[i],
+				val & (1 << i));
 }
 
 static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan)
-- 
1.7.1